• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.169-173
• /
• 1992

The surface geometry of o-diiodobenzene (ODIB) adsorbed on silver colloid surfaces has been studied. This molecule is standing up on 1 day old colloid surfaces, while it is lying down or standing up on 1 month old colloid surfaces. The surface geometry of ODIB is affected by the atomic scale surface roughness of colloid used. The SERS intensity of ODIB for lying down geometry is much more strong than that for standing up. This may be mainly due to that the distance from surface to the center of the molecule in lying down geometry is shorter than that in standing up.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.4
• /
• pp.125-137
• /
• 2009

Recently, the frequency in use of electric adjustable bed is going up by an increase in the elderly population. In bad ergonomic design for an electric adjustable bed causes some problems in the aspects of usability and safety. In particular, lots of accidents came from going up or going down an electric adjustable bed. In that case, the height of bed is very important factor for preventing an accident. This problem is related to its anthropometric factors. Therefore we carried out its anthropometric analysis and old people's standing action according the height of electric adjustable bed as an experimental study. As a result, we proposed some anthropometric design criteria and identified the effect of bed height when old people use it.

• Electrical & Electronic Materials
• /
• v.10 no.7
• /
• pp.713-718
• /
• 1997

Polyaniline free standing films cast from N-methyl-2-pyrrolidinone(NMP) solution, camphorsulfonic acid(HCSA), dodecylbenzensulfonic acid(HDBSA), inorganic matter(carbon black, graphite) and metal(silver) were prepared by processings. The properties of these films such as crystallinity, near-infrared absorption spectra and conductivity were investigated. The HCSA and HDBSA doped polyaniline films cast from m-cresol and chloroform solvents showed the metallic property and high crystallinity, respectively. The value of conductivity in the HCSA doped polyaniline film obtained 180 S/cm. We have obtained the value of conductivity 200 S/cm in the metal(silver) doped polyaniline film, which is higher than that of the HCSA doped polyaniline film. The metal(silver) doped polyaniline film shows good properties as a electromagnetic shielding material.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.1
• /
• pp.1-6
• /
• 1998

Polyaniline free standing films are prepared by various processing. The properties of these films such as electrical conductivity and electromagnetic shielding efficiency are investigated. The conductivities of films doped with a camphorsulfonic acid and a silver are found to be 170/cm and 190S/cm, respectively, indicating metallic behavior. The films added silver, which are casted from hydrochloric acid and dodecylbenzensulfonic acid, show that the electromagnetic shielding efficiency are obtained 42∼52dB and 46∼56dB in the frequency range of 10MHz∼1GHz, respectively. This suggests that the films added silver, which is casted from dodecylbenzensulfonic acid, can be used as electromagnetic shielding material.

• Journal of Veterinary Clinics
• /
• v.15 no.2
• /
• pp.274-278
• /
• 1998

The biological father of two Golden Retriever puppies was determined between two proposed stud dogs by using microsatellite DNA analysis. DNA was obtained from all the relevant dogs by buccal swabbing and three loci of tetranucleotide repeat microsatellite were PCR-amplifiedl and analyzed by polyacrylamide gel electrophoresis and silver staining. One of the two proposed stud dogs was assigned as the biological father of the puppies by the genotyping. The result demonstrated that the microsatellite DNA analysis is a simple, efficient method of paternity test in dogs.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.9
• /
• pp.1761-1764
• /
• 2008

The adsorption structure and binding of maleimide (MI) and succinimide (SI) on silver nanocolloidal surfaces have been comparatively investigated by means of pH-varied surface-enhanced Raman scattering (SERS). The two molecules appeared not to adsorb onto Ag surfaces at pH values below 5. The appearance of a ring ν (CH) band at ~3100 $cm^{-1}$ denoted the standing geometry of MI’s aromatic ring on Ag. The absence or weakness of in-plane vibrational modes of MI and SI also supported a perpendicular orientation of MI and SI on Ag from the electromagnetic selection rule. Density functional theory (DFT) calculations were employed to examine the vibrational frequencies of MI’s and SI’s neutral and anionic states.

• The Journal of the Korea Contents Association
• /
• v.14 no.9
• /
• pp.120-130
• /
• 2014

The purpose of this study was to evaluate the effects of line dance activity on the balance factors during static standing to reveal the exercise intervention for fall prevention. A 15-week line dance programme was applied to 16 elderly females who aged more than 65 years in the community. Balance ability during static standing was evaluated by the range of center of pressure(cop), the velocity of cop, and sway area that calculated on the basis of ground reaction force data, forces, and moments. The range and velocity of cop in the anterio-posterior were significantly reduced after line dance(p<.01, p<.05, respectively), but change in those of cop in the medio-lateral was not found. It was demonstrated that 16-week line dance activities allow more effective in anterio-posterior stability and sway area of static standing. It was suggested that the effect of fall prevention exercise should be studied more associate with fall from vestibular and sensory system as future study.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3451-3455
• /
• 2013

Single-crystalline silicon nanowires (SiNWs) were fabricated by using an electroless metal-assisted etching of bulk silicon wafers with silver nanoparticles obtained by wet electroless deposition. The etching of SiNWs is based on sequential treatment in aqueous solutions of silver nitrate followed by hydrofluoric acid and hydrogen peroxide. SEM observation shows that well-aligned nanowire arrays perpendicular to the surface of the Si substrate were produced. Free-standing SiNWs were then obtained using ultrasono-method in toluene. Alkyl-derivatized SiNWs were prepared to prevent the aggregation of SiNWs and obtained from the reaction of SiNWs and dodecene via hydrosilylation. Optical characterizations of SiNWs were achieved by FT-IR spectroscopy and indicated that the surface of SiNWs is terminated with hydrogen for fresh SiNWs and with dodecyl group for dodecyl-derivatized SiNWs, respectively. The main structures of dodecyl-derivatized SiNWs are wires and rods and their thicknesses of rods and wire are typically 150-250 and 10-20 nm, respectively. The morphology and chemical state of dodecyl-derivatized SiNWs are characterized by scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy.

• Journal of Integrative Natural Science
• /
• v.6 no.3
• /
• pp.170-175
• /
• 2013

Silicon nanowires were detached and obtained from silicon nanowire arrays on silicon substrate using a ultrasono-method. Silicon nanowire arrays on silicon substrate were prepared with an electroless metal assisted etching of p-type silicon. The etching solution was an aqueous HF solution containing silver nitrate. SEM observation shows that well-aligned nanowire arrays perpendicular to the surface of the silicon substrate were produced. After sonication of silicon nanowire array, an individual silicon nanowire was confirmed by FESEM. Optical characteristics of SiNWs were measured by FT-IR spectroscopy. The surface of SiNWs are terminated with hydrogen.

• 보존과학연구
• /
• s.19
• /
• pp.61-74
• /
• 1998

Conservation Treatment Process 1. Inlaying is observed at the back and head of a sword to grasp the inner structure of relics by photographing X-ray. 2. After removing rust of surface, inlaying emerge. 3. After hardening, inlaying emerge to magnetite layer by standing Scapel and Vibrotool throught microscope. Charcterization 1. Most of domestic inlaying become designed to the head of a sword but this inlaying become designed to gold inlaying to the back of a sword. 2. Inlaying is the technique to groove V-shape on the surface of relice and to put gold thread in.