• 한국멀티미디어학회논문지
• /
• 제22권12호
• /
• pp.1368-1375
• /
• 2019

In this paper, an prediction method is proposed for coding of depth pictures using spherical modeling. An spherical surface which has the least error from original depth values is modeled in a block. Pixels in the block are predicted through the parameters of the modeled spherical surface. Simulation results show that average prediction errors and entropy powers are improved to 30% and 200% comparing to the intra prediction of H.264/AVC, selection ratios of the proposed spherical modeling mode is more than 25%.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.55-60
• /
• 2005

This paper has been focused in developing of plastic lens with ultra-precision and low birefringence ability using by injection molding simulation tools. The simulation tools, $3D-Timon^{TM}\;and\;Asu-Mold^{TM}$ were applied to visualize indirectly the flow pattern of melted polymer enter the mould and the simulation results are verified as compared with the experimental results. Birefringence and polarized light generated in injection molding process was also calculated for each injection conditions and compared with .the pictures of experimented optical lens go through the polarized light plates device. A spherical radius of plastic optical lens transcribed from profile of mould core surface was measured to estimate the geometrical accuracy fer the each injection conditions. It is confirmed that the simulation results about flow pattern and polarized light area coincided in experimental results. It is known that increasing in thickness shrinkage at center of lens, the spherical radius is larger from comparing the graph measured spherical radius and the thickness shrinkage at center of lens

• 대한수학회보
• /
• 제57권1호
• /
• pp.195-206
• /
• 2020

The fundamental idea of this article is to present an effective way to obtain the large groups in terms of the split extension obtained by a finite cyclic group and a free abelian group rank 2. The proof of the main result on largeness property of this specific split extension groups will be given by using the connection of large groups with the groups having deficiency one presentations.

• 대한화학회지
• /
• 제61권4호
• /
• pp.191-196
• /
• 2017

앞선 연구에서 TP(Thiolate-Protected)-나노은의 합성 시 초기에 형성되는 티올화 은 층간화합물의 형성을 막기 위하여 에탄올에 녹아있는 $NaBH_4$와 티올에 $AgNO_3$를 첨가하는 개선된 단일상 합성법을 보고하였다. 본 연구에서는 이 합성법을 보다 일반화하기 위하여 TP-나노금과 나노백금의 합성에 적용하였다. 합성된 생성물의 나노크기, 형상 및 금속에 부착된 티올의 배열은 UV-vis. 스펙트럼, 투과 전자 현미경 사진, X-선 회절 패턴 및 적외선 분광 스펙트럼을 이용하여 규명 하였다. TP-나노금과 나노백금은 구형 및 타원형의 형태를 하고 있으며 입자크기는 각각 약 3~7 nm와 약 2 nm 이하로 나타나고 있다. 한편 TP-나노금의 표면을 감싸는 옥탄티올 음이온의 메틸렌 사슬 [$-(CH_2)_7-$]의 메틸렌 배향은 trans임을 보여주고 있다.