• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.179-182
• /
• 2000

This paper investigates characteristics of spiral charge for charge simulation method to calculate electric fields of spiral conductor bundles with spiral rods in 765 kV transmission line. We finds the simulating spiral charge as constant charge density give less potential calculation error than sinusoidal charge density. When a spiral rod is simulated as spiral charge, we also knows two spiral charge can simulate spiral rod best.

• 대한조선학회논문집
• /
• 제35권1호
• /
• pp.54-60
• /
• 1998

일반적으로 선박의 보침성능을 평가하기 위해서 spiral test가 이용되고 있다. 그러나 spiral curve를 얻기 위한 spiral시험 및 역spiral시험에 있어서 바람과 파도 등의 영향으로 많은 어려움이 따른다. 따라서 spiral 시험을 하지 않고도, zig-zag test의 overshoot angle을 이용하여 선박의 보침성능을 판정하는 방법이 시도되고 있다. 본 연구에서는 실선의 spiral 시험결과를 대상으로, K-T 조종수학모델을 적용하여 zig-zag 운동을 계산하고, overshoot angle과 보침성능과의 상관관계를 조사하였다.

• 조명전기설비학회논문지
• /
• 제15권4호
• /
• pp.31-36
• /
• 2001

본 논문은 765[kV] 송전선로의 풍소음 저감용 spiral rod의 전계를 계산하기 위해서 3차원 전하중첩법용 나선 전하의 특성에 관해 연구하였다. 본 연구에서 나선전하를 정현 함수 전하로 모의하는 것 보다 상수전하로 모의한 것이 전위오차가 적었고, 상수전하를 한 개로 모의하는 것 보다 2개를 배치하여 계산했을 때 spiral rod의 전하를 가장 잘 모의할 수 있는 것으로 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3015-3020
• /
• 2007

An experimental study of the dynamic characteristics of the free rising oblate spherical bubble is investigated. As noted by Saffman, the characteristics of the spiral motion are defined with parameters of the spiral frequency, spiral radius, and rising velocity. High speed camera recorded every detail information of free rising bubble. The spiral number, the bubble rise velocity, and the angular velocities were measured for the bubble size between 1.0mm to 20.0mm in diameter. In order to make clear trajectory, we employed the Fast Fourier Transformation for the normal digital camera data to synchronize with the high speed camera data. It was found that the spiral number suggested here was monotonically decreased as the bubble size increases. The present observation, however tells us that previous Saffman's formulation shows a good agreement with the trend, but over estimated spiral number. Therefore, it is recommended that Saffman's theoretical study is needed to be improved.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.2029-2034
• /
• 2004

Spiral jet is characterized by a wide region of the free vortex flow with a steep axial velocity gradient, while swirl jet is largely governed by the forced vortex flow and has a very low axial velocity at the jet axis. However, detailed generation mechanism of spiral flow components is not well understood, although the spiral jet is extensively applied in a variety of industrial field. In general, it is known that spiral jet is generated by the radial flow injection through an annular slit which is installed at the inlet of a conical convergent nozzle. The present study describes a computational work to investigate the effects of annular slit on the spiral jet. In the present computation, a finite volume scheme is used to solve three dimensional Naver-Stokes equations with RNG ${\kappa}-{\varepsilon}$ turbulent model. The annular slit width and the pressure ratio of the spiral jet are varied to obtain different spiral flows inside the conical convergent nozzle. The present computational results are compared with the previous experimental data. The results obtained obviously show that the annular slit width and the pressure ratio of the spiral jet strongly influence the characteristics of the spiral jets, such as tangential and axial velocities.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.101-106
• /
• 2001

This paper presents experimental results for the confining characteristics of cylinder with center-hole and spiral reinforcements. The experiments have been conducted for the specimens with primary variables i.e., spiral reinforcement ratio and diameter of center-hole which affect the compressive strength and stress-strain relationship. Through this research, it was found that the compressive strength and ductility were increased with the ratio of spiral reinforcement because the lateral expansion of the concrete inside the spiral was restrained by the spiral, but dependent on the size of center-hole.

• Tuberculosis and Respiratory Diseases
• /
• 제46권4호
• /
• pp.564-573
• /
• 1999

배 경: 폐색전증의 임상증상은 비특이적이어서 임상증상 만으로 진단이 어렵다. 폐색전증의 진단을 위하여 폐환기관류주사가 선별검사로 널리 사용되고 있으나 PIOPED(the prospective investigation of pulmonary embolism diagnosis) 연구의 결과처럼 저 중등도 확률 소견일 경우 폐색전증의 진단을 내리거나 배제하는데 도움이 되지 않으며 PIOPED 연구의 약 60%의 환자가 저 중등도 확률 소견을 보인다. 이러한 환자들은 확진을 위해 폐동맥조영술이 필요하지만 침습적이며 쉽게 시행할 수 없다는 단점이 있다. 최근 가공 영상을 줄이고 조영제 일시주사 기술로 혈관구조를 조영할 수 있게 한 spiral CT가 폐동맥조영술을 대신하여 폐색전증의 진단에 이용하는 전향적 연구가 이루어지고 있다. 이에 저자들은 폐색전증의 진단에서 spiral CT의 유용성을 알아보고자 폐색전증을 의심하여 spiral CT를 찍은 환자를 대상으로 후향적 조사를 시행하였다. 방 법: 1994년 10월부터 1997년 2월까지 삼성서울병원에 입원한 환자 중 폐색전증이 의심되어 spiral CT를 시행한 20명(남자 : 13명, 여자 : 7명, 평균연령 : 58세)을 대상으로 하였다. 폐색전증의 위험인자로 심부정맥혈전증과 고령이 가장 많았고 폐색전증이 의심된 임상증상으로 갑자기 발생하였거나 악화된 호흡곤란이 가장 많았다. 결 과: 20명의 환자 중 spiral CT로 폐색전증으로 진단된 환자는 16명이었고 3명은 각각 폐암, 폐기종 환자에서 발생한 폐농양을 동반한 폐렴, 울혈성 심부전에 의한 흉막삼출증으로 색전을 확인할 수 없었다. 나머지 1명은 spiral CT에서 정상 소견이었다. 폐환기관류주사에서 고확률로 판정된 12명의 환자중 1명에서 spiral CT로 폐기종 환자에서 발생한 폐농양을 동반한 폐렴인 위양성으로 진단할 수 있었다. 폐환기관류주사에서 저 중동도 확률을 보이는 4명 중 3명에서 spiral CT로 폐색전증을 진단할 수 있었다. 야간, 기계호흡 등의 이유로 폐환기관류주사를 시행치 못한 3명에서 spiral CT로 폐색전증을 진단 또는 배제할수 있었다. 폐색전증으로 진단된 16명 중에서 폐엽동맥 수준 이상의 색전은 11례 였으며 분절하동맥 수준 이하의 색전 경우는 5례였다. 결 론: 이상의 결과로 spiral CT는 폐분절동맥까지의 폐색전증의 진단에 유용하며, 특히 중심성 폐색전증의 확진과 배제에 있어서 중요한 진단방법이라고 생각된다. 향후 폐색전증의 진단에 spiral CT가 진단과정에 도입될 수 있는지에 대한 대규모의 전향적인 연구가 필요할 것으로 사료된다.

• 천문학회지
• /
• 제34권4호
• /
• pp.313-315
• /
• 2001

Some authors have concluded that spiral structures and shocks do not develop if an adiabatic index $\gamma$ > 1.16 is adopted in accretion disc modelling, whilst others have claimed that they obtained well defined spirals and shocks adopting a $\gamma$ = 1.2 and a $M_2/ M_1$ = 1 stellar mass ratio. In our opinion, it should be possible to develop spiral structures for low compressibility gas accretion discs if the primary component is a black hole. We considered a primary black hole of 8M0 and a small secondary component of 0.5M$\bigodot$ to favour spiral structures formations and possible spiral shocks via gas compression due to a strong gravitational attraction. We performed two 3D SPH simulations and two 2D SPH simulations and characterized a low compressibility model and a high compressibility model for each couple of simulations. 2D models reveal spiral structures existence. Moreover, spiral shocks are also evident in high compressibility 2D model at the outer disc edge. We believe that we could develop even well defined spiral shocks considering a more massive primary component.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.157-160
• /
• 1996

In this paper, reconstruction algorithms of spiral scan imaging which has been used for ultra fast magnetic resonance imaging have been reviewed, and some simulation results using two different algorithms are reported. Since the trajectory of the spiral scan in k-space is the spiral, reconstruction of the spiral scan is not as straight forward as that used in Fourier imaging technique where the sampling points are usually on the rectangular grids. Originally the reconstruction of the spiral scan imaging was based on the convolution backprojection algorithm modified with a shift term, however, some other reconstruction techniques have also been tried by remapping sampling points from spiral trajectory to Cartesian grids. Some experimental aspects of MR spiral scan imaging will also be addressed.

• 대한기관식도과학회지
• /
• 제4권1호
• /
• pp.43-51
• /
• 1998

Background： Three-dementional imaging with spiral CT(3D spiral CT) is a well established imaging modality which has been investigated in various clinical settings. However the 3D spiral CT in upper airway disease is rarely reported and its results are still obscure. Objectives： To access the usefulness of 3D spiral CT imaging in patients with upper airway diseases. Materials and Methods We performed 3D spiral CT in fourteen patients In whom upper airway diseases were clinically suspected. Nine of these patients had upper airway stenosis, two had laryngeal cartilage fracture, and three had laryngo-hypopharyngeal cancer. For evaluation of location and extent of the lesions, we compared the findings of 3D imaging with those of air tracheogram, conventional 2D CT images, endoscopic and operative findings. Results： In case of stenosis, 3D spiral CT provide significant useful information, particularly the site and length of the stenotic segment. But, it was difficult to define the fracture of the laryngeal framework and to detect the cartilagenous invasion by head and neck cancer using the 3D imaging. Conclusion : The 3D spiral CT was an useful adjunctive method to assess some kind of upper airway disease but not in others. So, we should compare the findings of 3D images with those of other diagnostic tools for accurate diagnosis of the upper airway disease.