• Transactions of Materials Processing
• /
• v.12 no.2
• /
• pp.142-150
• /
• 2003

To construct the extrusion die surface, a B-Spline surface scheme based on the cubic B-Spline curve interpolation method is proposed in the present work. The inlet and outlet profiles are described with B-Spline curves by using the centripetal method for uniform parameterization. The interior control points of surface are generated using the derivative characteristics of B-Spline curve. A complete B-Spline surface is constructed by using appropriate coordinate transformation and knot deletion. In the present study, a quantitative measure for the control of surface is suggested by introducing the tangential vector and inclination angles at the inlet and outlet sections. To verify the validity of the proposed method, automatic surface generation is carried out for the various types of extrusion die surface.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.2
• /
• pp.185-199
• /
• 1999

본 연구에서는 새로운 spline 유한대판 요소를 제안하였다. 제안된 정식화는 등매개 개념에 의해 기하학적 형상과 변위장을 가정함에 있어 길이방향은 3차의 B-spline 곡선으로, 횡방향에 대해서는 Lagrange 다항식에 의해 표현된다. 이 논문은 평판과 쉘해석에 있어서의 등매개 spline 유한대판 요소의 개선에 목적을 두고 있다. 이 새로운 요소는 스트립의 내부 절점에서 6개의 자유도를 갖는 합-응력 감절점 쉘 요소로부터 유도하였다. 스트립의 기하학적 형상은 강체 회전에 대한 정의에 위배되지 않고도 두께 방향을 따라 Jacobian이 일정하다는 가정을 따랐으며 고체역학에서 정의되는 면내 회전을 penalty 함수에 의한 구속조건으로 간주하여 면내 회전에 관계된 자유도를 생성하였다. 제안된 요소에 대하여 쉘의 전형적인 문제에 대한 수치예제를 보였으며 이 스트립 요소의 성능을 평가하였다.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.169-171
• /
• 2004

This paper propose a new detection method of curve lane using Catmull-Rom spline for recognition various shape of the curve lane. To improve the accracy of lane detection, binarization and thinning process are firstly performed on the input image. Next, features on the curve lane such as curvature and orientation are extracted, and the control points of Catmull-Rom spline are detected to recognize the curve lane. Finally, Computer simulation results are given using a natural test image to show the efficiency of the proposed scheme.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.4 no.2
• /
• pp.1-9
• /
• 2000

An algorithmic approach to degree elevation of B-spline curves is presented. The new algorithms are based on the blossoming process and its matrix representation. The elevation method is introduced that consists of the following steps: (a) decompose the B-spline curve into piecewise $B{\acute{e}}zier$ curves, (b) degree elevate each $B{\acute{e}}zier$ piece, and (c) compose the piecewise $B{\acute{e}}zier$ curves into B-spline curve.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.679-682
• /
• 1988

From the viewpoint of general recognition system, B-spline is introduced for the approximation and recognition of human profile contours. Profile contour is approximated to the cublic B-spline curve by least square fitting so that B-Spline nodes nearly correspond with the curvature extrema of the contour. This method is designed for the spline to be good features in recognition, and also showed good approximation compared with the variants of B-spline appraximation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.19-26
• /
• 1998

The isoparametric spline finite strip method for degenerated shells is presented. In the formulation, both the geometry and the displacement field are represented by uniform cubic B-spline curves. Spline shell strip is degenerated stress-resultant shell with 6 dof at each node;and the penalty function method is used to incorporated the six dof,

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.957-960
• /
• 1995

A new method is introduced for the parametrization in B-spline surface interpolation. THis method uses the basis function to assign the parameter values to the arbitrary set of geometric data. This method gives us several important advantages in geometric modeling.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.5
• /
• pp.683-688
• /
• 2009

The purposes of this paper is to propose new techniques to reconstruct measured optical images by using the template matching and B-Spline interpolation method based on image processing technology. To do this, we detect the matching template and non-matching template from each optical image. And then, we match the overlaped images from base level by correcting roll, pitch, and yaw error of images. At last, the matching image is interpolated by B-Spline interpolation. Finally, we show the effectiveness and feasibility of the proposed method through some experiments.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.229-238
• /
• 2002

The calculation of earthwork plays a major role in plan or design of many civil engineering projects, and thus it has become very important to improve the accuracy of earthwork calculation. In this paper, we propose an algorithm of finding a cubic spline surface with the free boundary conditions, which interpolates the given three dimensional data, by using B-spline and an accurate method to estimate pit-excavation volume. The proposed method should be of interest to surveyors especially concerned with accuracy of volume computations. We present some computational results showing that our proposed method provides good accuracy.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.1
• /
• pp.44-48
• /
• 1996

In manufacturing of exact products, the offsetting is required to transfer the design data of shape to manufacturing data. In offsetting the degeneracies are occurred, and these problems are mere difficult in freeform shapr manufacuring. This paper is using the geometric properties of B-spline curves to solve the degeneracy of offsetting and to generating of enhanced offsetting. The offsetting of B-spline control polygon spans generates exact control polygon of original shapes. This method is faster in generating offset curve than the normal offsetting, and the resulted offset curves are exact. The additional property of this method is using to control offset shape as B-spline curves. We believe that this method is as effective solution for modifying of offset curves.