• Environmental Engineering Research
• /
• v.7 no.2
• /
• pp.75-84
• /
• 2002

• Microbiology and Biotechnology Letters
• /
• v.1 no.1
• /
• pp.59-65
• /
• 1973

The details of design procedure, practically used for the construction of fluidized bed dryer system of the Super Cereal Plant of 250, y capacity were presented. The plant was in its entirety designed and constructed solely by domestic engineering potenality with local construction materials. In the drying process, the water content of cooked kernel of wheat is reduced from about 23% to about 14% and the conversion of starch contained in the endosperm to ${\alpha}$-starch is to be completed by contacting with hot combustion gas of kerosene at about 90-130$^{\circ}C$.

• Fire Science and Engineering
• /
• v.15 no.2
• /
• pp.1-5
• /
• 2001

We had investigated combustion properties of starch. Decomposition of starch scavenged by pre-cipitator of spinning factory with temperature were investigated using DSC and TGA. Combustion properties of starch according to amount were checked as temperature variation according to time using spontaneous ignition apparatus. Moreover, combustion properties with blowing or without blowing condition were checked in spontaneous ignition apparatus. As results of thermal analyses, increase in raising temperature causes initial smoldering temperature to move towards low temperature section. In addition, as amount of starch was increased, initial smoldering temperature was lowered. All of combustion forms were smoldering combustion. Initial smoldering temperature was low more slightly with blowing condition than without blowing condition in spontaneous ignition apparatus, which condition made heating value high.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.6
• /
• pp.818-826
• /
• 2013

To reduce the production cost of Lactobacillus, discarded red ginseng starch was collected from a factory of red ginseng extract in order to develop the Lactobacillus culture medium. According to the analysis of the gensenoside composition of red ginseng starch, the total gensenoside content of starch was 2.73 mg/g, and the gensenoside $Rb_1$, $Rb_2$ and $Rg_3$ contents were 0.1, 0.29 and 0.52 mg/g, respectively. For the preparation of the liquid media, red ginseng starch was added at rates of 0, 5, 10 and 20%. Further, Lactobacillus plantarum 15357 and Leuconostoc mesenteroides sub sp. strains were then inoculated to these prepared broths. With the red ginseng starch medium, the growth rates ($1.42{\times}10^7$ and $2.96{\times}10^{10}$ CFU/mL) and the final cell concentrations were higher than the MM medium ($1.0{\times}10^7$ CFU/mL). The optimal concentration of red ginseng starch and yeast extract as a medium were 20% and 10 g/L, respectively. Under these conditions, the cell mass of L. plantarum 15357 and L. mesenteroides sub sp. reached $5.11{\times}10^{10}$ and $8.17{\times}10^{10}$ CFU/mL. These results show a great possibility for the utilization of red ginseng starch as economic medium sources in the production of cell mass of lactic acid bacteria. This is the first trial of development of economic LAB growth medium using discarded red ginseng starch.

• Korean Journal of Agricultural Science
• /
• v.47 no.3
• /
• pp.633-644
• /
• 2020

Rice paper is an element of Vietnamese cuisine that can be used to wrap vegetables and meat. Rice and starch are the main ingredients of rice paper and their mixing ratio is important for quality control. In a commercial factory, assessment of food safety and quantitative supply is a challenging issue. A rapid and non-destructive monitoring system is therefore necessary in commercial production systems to ensure the food safety of rice and starch flour for the rice paper wrap. In this study, fluorescence hyperspectral imaging technology was applied to classify grain flours. Using the 3D hyper cube of fluorescence hyperspectral imaging (fHSI, 420 - 730 nm), spectral and spatial data and chemometric methods were applied to detect and classify flours. Eight flours (rice: 4, starch: 4) were prepared and hyperspectral images were acquired in a 5 (L) × 5 (W) × 1.5 (H) cm container. Linear discriminant analysis (LDA), partial least square discriminant analysis (PLSDA), support vector machine (SVM), classification and regression tree (CART), and random forest (RF) with a few preprocessing methods (multivariate scatter correction [MSC], 1^st and 2^nd derivative and moving average) were applied to classify grain flours and the accuracy was compared using a confusion matrix (accuracy and kappa coefficient). LDA with moving average showed the highest accuracy at A = 0.9362 (K = 0.9270). 1D convolutional neural network (CNN) demonstrated a classification result of A = 0.94 and showed improved classification results between mimyeon flour (MF)1 and MF2 of 0.72 and 0.87, respectively. In this study, the potential of non-destructive detection and classification of grain flours using fHSI technology and machine learning methods was demonstrated.

• The Korean Journal of Food And Nutrition
• /
• v.22 no.1
• /
• pp.86-91
• /
• 2009

To develop a new traditional Gugija tagju, various koji were prepared using several starch sources along with Aspergillus awamori var. kawachi, and then their effects on the quality of the tagju were investigated. Ethanol contents(11.1${\sim}$13.8%) were not significantly different among the Gugija tagju made from the various types of koji, whereas the tagju made using non-glutinous rice koji had the best total acceptability. The addition of 1% Gugija extracts into the mash increased its total acceptability and anti-hypertensive angiotensin I-converting inhibitory activity, and the optimal fermentation period for brewing the Gugija tagju was 10 days.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.15-21
• /
• 1984

In order to ascertain the practical possibility of home made retort pouches for production of retort pouch foods in factory, two kinds of retortable pouches, i. e. 3 ply film (polyester film/Al. foil/casting polypropylene) and 4 ply film(polyester film/Al. foil/nylon/casting poll·propylene) were developed in Korea, and then, their physical properties, such as physical strength, heat resistance during thermal processing and preservability of foods and sanitary safety, were tested and compared with the foreign made pouches. The results obtained were summarized as follows. a. The physical strength of home made retort pouches in processing model foods(soybean oil 5 %, acetic acid 2%, starch 5 % and water to 100 %) was equal to that of foreign made pouches at accelerated examination condition($38^{\circ}C$, 98 % RH). But the lamination strength of home made products was a little bit superior to that of foreign made products. b. Home made retort pouches(SAMA-4 ply and SAMA-3 ply pouch) packed with rice or curry was possible to bear the thermal processing at $135^{\circ}C$ and shelf-life was one year or more at ambient temperature($20^{\circ}C$). c. Sanitary safety test showed that these home made retort pouches were acceptable comparing to the regulation recommended by the Ministry of Health and Social Affairs.