• Journal of the Korea Furniture Society
• /
• v.11 no.2
• /
• pp.1-6
• /
• 2000

This study was carried out to investigate the effect of steaming on mechanical properties of heat-compressed wood specimens. The specimens for this mechanical strength tests were prepared to super-heated steam treatment after compression to the radial direction of sonamu (Pinus densiflora). The specimen's size is $50(L)mm{\times}20(R)mm{\times}17(T)mm$. Steaming temperature and treatment time is $120^{\circ}C$ and 20, 40, 60, 80, 100 minutes, respectively. Modulus of elasticity(MOE) in compressive test is directly proportional to steaming time. On the other hand, modulus of elasticity in bending test between steaming and not steaming after heat-compressed wood is similar irrespective of steaming time. The reason for this phenomenon is not clear yet.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.5
• /
• pp.332-336
• /
• 2008

PPD ginsenosides in ginseng leaf were analyzed to determine effects of either FIR heat or steaming heat treatment. Among the PPD ginsenosides, Rb1, Rc and Rb3 forming four glycoside-attached aglycons were increased as FIR heat temperatures were increased from 60 to $120^{\circ}C$, while Rb3 was decreased. In addition, FIR heat treatment was effective to increase Rd forming a three glycoside-attached aglycon. Rg3 and Rh2 were not increased by the FIR heat treatment. In steaming heat treatment, Rb1 was significantly decreased, while Rb2 was increased. Rd was also increased by increased steaming temperature, yet its content was lower than in the FIR heat treatment. However, the steaming heat treatment increased yields of Rg3 and Rh2, which were not observed in the FIR heat treatment. Thus, FIR heat treatment was beneficial to efficient products of Rb1, Rc, Rb3 and Rd. Steaming heat treatment was effective to higher collection of Rb2, Rg3 and Rh2.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.85-90
• /
• 2002

This study was carried out to investigate the dimensional stability of bentwoods by three treatments: steaming, urethane varnish coating, and polyethylene glycol (PEG) treatment. Bentwood processing employed a bending-jig with only 4 cm radius of curvature (ROC). The used species were bitter wood (Picrasma quassioides), painted maple (Acer mono), and birch (Betula schmidtiii). The bending properties of these are well-known in bentwood production (Jung et al., 2002). The bentwoods were treated repeated at room temperature [20℃, RH 80% (12 hours) and 40℃ under RH 10% (12 hours)]. To estimate the dimensional stability of bentwoods, we measured the radius of curvature and end-distance. The best results could be attained with PEG treatment. Steaming was the worst treatment. Comparing the properties of the different species, the dimensional stability of bitter wood was excellent. It was concluded that the steaming treatment was unsuitable for dimensional stability of bentwoods.

• YAKHAK HOEJI
• /
• v.55 no.6
• /
• pp.451-455
• /
• 2011

So Cheong Ryong Tang (SCRT) has been used as a traditional herbal medicine for the treatment of the bronchial asthma. In this study, the effect of steaming process on changes in 11 major compounds (homogentisic acid, ephedrine HCl, paeoniflorin, cinnamic acid, cinnam aldehyde, glycyrrhizin, 6-gingerol, schizandrin, methyleugenol, gomisin A and gomisin N) content and neuroprotective activity of SCRT were evaluated. Major compound content was slightly different with steaming produce. The contents of paeoniflorin, cinnamic acid, cinnam aldehyde, 6-gingerol and methyleugenol were decreased and homogentisic acid, ephedrine HCl, glycyrrhizin, schizandrin and gomisin A were increased by steaming process. The neuroprotective activity of steaming SCRT was determined in mouse hippocampal HT22 cells by MTT assay. As a result, neuroprotective activity of a steaming SCRT was higher than that of a non steaming SCRT. This study demonstrated that neuroprotective activity of SCRT can be improved through steaming process.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.1
• /
• pp.50-56
• /
• 2012

This paper examines the effects of various methods of soft steaming(i.e., forced convection-boiler, forced convection-fan, and natural convection) on the quality of potatoes. In particular, the paper investigates the effects of cooking conditions (the steaming method, the treatment time, and the temperature) on the color(L, a, b), moisture content, texture profile, and ascorbic acid of potatoes. The results indicate that not only the cooking method, the treatment time, and the temperature but also the heat transfer mechanism had considerable influence on potato quality. In addition, natural convection steaming was superior to other treatment methods in terms of nutrient retention and texture maintenance. The results of this study should be useful for establishing commercial standards for processing potatoes and improving the quality of thermally processed foods.

• Food Science and Biotechnology
• /
• v.18 no.2
• /
• pp.374-378
• /
• 2009

Three physical methods, photostimulated luminescence (PSL), thermoluminescence (TL), and electron spin resonance (ESR), have been applied to detect the irradiation treatment for the non- and steamed sesame seed samples. PSL successfully screened the irradiated samples from the non-irradiated control by comparing their photon counts (PCs) with the lower (less than 700 count/60 sec) and upper threshold values (higher than 5,000 count/60 sec). TL signals were still detected in all irradiated samples even after steaming, which was reconfirmed with TL ratios [integrated area of $TL_1$ (the first glow)/$TL_2$ (the second glow)] through re-irradiation step. ESR spectrometry showed that radiation-induced cellulose radicals were detected in all the irradiated samples irrespective of steaming treatment. Identification of the irradiated sesame seeds was possible even after steaming by analyzing PSL, TL, and ESR.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.1
• /
• pp.121-126
• /
• 2009

Korean ginseng (Panax ginseng C. A. Meyer) has been used as an important medicinal plant in the Orient for a long time. It has been claimed that ginseng has many beneficial bioactive effects on human health, such as antitumor, antistress, antiaging and enhancing immune functions. Red ginseng possibly have new ingredients converted during steaming and dry process from fresh ginseng. In this study, pharmacological efficacy and ingredient conversion of ginseng by 9 repetitive steaming and drying process were investigated measuring conversion efficiency of acidic-polysaccharide, phenolic compounds and inhibition of peroxide lipides. It was found that acidic-polysaccarides were increased by heat treatment. In addition, maltol of phenolic compounds, strong antioxidant, produced during the process of red ginseng by Maillard reaction. Acidic-polysaccarides and maltol were increased after the 1st and 3rd steaming and drying treatments, but they were decreased gradually after 5th, 7th, and 9th treatments. Antioxidant activity was increased as increasing treatment times of steaming and drying without significance. Effect of red ginseng extract on inhibition of peroxide was increased gradually until after the 7th treatment, but remarkably decreased after the 9th treatment.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.4
• /
• pp.9-15
• /
• 2001

This study deals with shear strength test for Pinus densiflora and Pinus radiata treated at above $100^{\circ}C$ by heat steam. Treatment conditions of this experiment were operated at regular intervals of $20^{\circ}C$ at temperatures up to $200^{\circ}C$ for 5, 10, 20 and 30 minutes by using the steam-explosion apparatus. It was examined, at high temperatures, degradation of some compounds from wood composition could lead to reduced the shear strength through heat steaming processes and play a large part in the plastic process of solid wood materials. It could be estimated that the shear strength of woods were gradually reduced by heat steaming time. Remarkable reduction of shear strength of woods was observed with increasing steaming temperatures above 10 minutes steaming time. Furthermore, this phenomenon shows a tendency to increase with higher temperatures. Therefore, it was considered that the softening by steaming treatment at high temperatures is necessary for the improvement on the wood processing ability.

• Journal of Aquaculture
• /
• v.17 no.4
• /
• pp.282-288
• /
• 2004

This study was carried out to improve water thestability of extruded shrimp feed. Three types of extruded shrimp feeds which were control diet (no steaming, no wheat gluten), steaming treated diet and steaming treated diet containing wheat gluten were prepared to using the pilot scale extruder. Comparing with the water stability values of two types of extruded shrimp feed, Steamed shrimp feed containing 4% (w/w) wheat gluten showed on I after 48 h was better than the control diet (no steaming, no wheat gluten) of which water stability value was 4. Also Penaeus chinensis fed on the steamed feed showed good body weight gain (237%) and feed efficiency (16.7%) compared with body weight gain (151%) and feed efficiency (12.8%) of control diet in the feeding trial for 50 days. Briefly, the extruded shrimp feed has more efficient water stability on below I, and recommendable wheat gluten content and steaming time were 4∼8% (w/w) and 5∼10 minutes.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.1-7
• /
• 2002

This study deals with physical properties of Larch(Larix kaemferi Carr.) treated by steaming at temperatures above 100℃. Treatment conditions of this experiment were operated at regular intervals of 10℃ at temperature up to 130℃ for 10, 30 and 60 minutes by using the auto-clave. The Bending strength and compressive strength along the grain were slightly decreased with increasing the treating temperatures. There was no significant relations between wood strength and steaming temperatures. At the range from 120℃ to 130℃ of steaming temperature, it was considered that the change of composition and structure in cell wall was changed due to release of stresses. Water absorption characteristics were not affected by steaming temperature. In this experiment limits, it was concluded that physical properties of wood by steaming treatment were affected more largely by wood density than by treating temperature.