• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.6
• /
• pp.138-145
• /
• 2007

Among various rapid prototyping processes, stereo-lithography process which can manufacture transparent prototype is known to be the greatest in the form & dimensional accuracy and surface roughness. In this paper, bench mark tests of 4 stereo-lithography-type rapid prototyping apparatus were carried out using transparent materials. The test includes measurement of mechanical properties, form accuracy, building speed and manufacturing cost. It was observed that ViperPRO of 3D systems is advantageous in the mechanical properties and building speed, RM600011 of CMET in sub-milli scale form accuracy and manufacturing cost, and relatively economical Eden500V of Objet is great in tensile strength at room temperature.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.2
• /
• pp.95-104
• /
• 2012

In this paper, an estimation of person height and 3D location of a moving person by using the pan/tilt-embedded stereo tracking system is suggested and implemented. In the proposed system, face coordinates of a target person is detected from the sequential input stereo image pairs by using the YCbCr color model and phase-type correlation methods and then, using this data as well as the geometric information of the stereo tracking system, distance to the target from the stereo camera and 3-dimensional location information of a target person are extracted. Basing on these extracted data the pan/tilt system embedded in the stereo camera is controlled to adaptively track a moving person and as a result, moving trajectory of a target person can be obtained. From some experiments using 780 frames of the sequential stereo image pairs, it is analyzed that standard deviation of the position displacement of the target in the horizontal and vertical directions after tracking is kept to be very low value of 1.5, 0.42 for 780 frames on average, and error ratio between the measured and computed 3D coordinate values of the target is also kept to be very low value of 0.5% on average. These good experimental results suggest a possibility of implementation of a new stereo target tracking system having a high degree of accuracy and a very fast response time with this proposed algorithm.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.276-286
• /
• 2008

The representative alignments for taking a stereo image by using a stereoscopic camera are the toed-in and the parallel alignment. In this paper, we tried to find important factors in the process that captures the stereo image by modifying parallel type 3D camera alignment to take the same object information as, for instance, when toed-in type was used. The modified parallel type 3D camera has merits in both types. As a result, three important factors are found by simulation to be inter-camera distance, field of view and convergence angle for both types. And the change of the convergence angle is known to be the most important factor at the stereo fusible area in processing. The effective ranges of these factors to simulate perfectly toed-in type by modified parallel type are strongly dependent on a user's circumstances such as mobile, official, theater and so on. Additionally, the error of the simulation is reduced when the focal length of the stereo camera is short and the convergence angle becomes smaller.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.210-213
• /
• 2000

In the closed range space, the parallel two CCD cameras are used to acquire a pair of stereo image. The acquired stereo image are computed with Wavelet Transform repeatedly and including the low frequency component, the image size of those are reduced. It is the pyramid structure. The optimum matching point is searched to the pixel. Then appling the optimum matching point to DLT, it extract the three - dimensional surface coordinate from a stereo image. The direct linear transformation(DLT) method is used to calibrate the stereo camera compute the coordinate on a three dimensional space. To find the parameters for the DLT method, 30 control points which marked on the cylinder type object are used. To improve the matching algorithm, the paper select the pyramid structure for Wavelet Transform. The acquired disparity information is used to represent the really three-dimensional surface coordinate.

• Journal of Sensor Science and Technology
• /
• v.5 no.5
• /
• pp.55-62
• /
• 1996

This paper describes development of Polarized Stereo Monitoring System (KAERI-PSM) and compares the remote handling performance of KAERI-PSM with that of other monitoring systems, electric shutter type stereo monitoring system and general TV monitoring system. Remote handling performance is evaluated by total time and error number on remote operating experiments. Four kinds of remote handling experiments are carried out through 1) directly 2) general TV 3) electric shutter type monitor, and 4) KAERI-PSM. In these experiments six employees are participated and PUMA robot with force-torque reflectional joystic is used. The result of experiments show that camera angle against object is significant factor in monitoring and stereo monitoring system give more performance benifits in terms of accuracy and speed of remote handling operation than general TV monitoring system. In comparision of the polarized and electric shutter type stereo monitoring system, both have similar accuracy and speed for remote handling operation, but the former is superior in image quality and stability of the performance.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.369-371
• /
• 2009

휴머노이드 로봇에서 스스로 환경을 인식하는 기술은 필수적으로 필요하다. 그러나 정확하게 환경을 인식하기 위해서는 휴머노이드 움직임을 추정하여 보정해야 한다. 따라서 본 논문에서는 type-2 퍼지셋을 이용하여 휴머노이드 로봇의 움직임을 스테레오 비전기반으로 추정하는 방법을 제안하고자 한다. 본 연구에서는 우선 스테레오 비전으로 얻은 Disparity Map을 Type-2 퍼지셋을 이용하여 추적할 대상을 추출한다. 추출된 대상은 보다 정확한 계산을 위하여 Wavelet Transform을 이용하여 정보량을 확장하였으며, 그 결과로 얻어진 결과영상들은 다시 Least suqare approximation과 Type-2 퍼지셋을 이용하여 하나의 결과값으로 나타내어진다. 연속된 두 이미지의 움직임을 추정함으로써 로봇의 움직임을 추정하게 된다. 제안된 방법은 실험을 통하여 그 추정 정확도나 연산속도 면에서 효율적임을 알 수 있었다.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.763-764
• /
• 2008

Sensing is an important part of a smart home system. Vision sensors are a type of passive systems, which are not sensitive to noise. In this paper, we implement a prototype for stereo vision systems using OpenCV. It is an open source library for computer vision developed by Intel corporation. The prototype will by used for comparing performance among various stereo algorithms and for developing a stereo vision smart camera.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2407-2410
• /
• 2003

In this paper, we propose a new stereoscopic video conversion methodology that converts two-dimensional (2-D) MPEG-4 video to stereoscopic video. In MPEG-4, each Image is composed of background object and primary object. In the first step of the conversion methodology, the camera motion type is determined for stereo Image generation. In the second step, the object-based stereo image generation is carried out. The background object makes use of a current image and a delayed image for its stereo image generation. On the other hand, the primary object uses a current image and its horizontally-shifted version to avoid the possible vertical parallax that could happen. Furthermore, URFA(Uncovered Region Filling Algorithm) is applied in the uncovered region which might be created after the stereo image generation of a primary object. In our experiment, show MPEG-4 test video and its stereoscopic video based upon out proposed methodology and analyze Its results.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.3
• /
• pp.163-172
• /
• 2003

A stereo matching has been an important tool for the reconstruction of 3D terrain. The current state of stereo matching technology has reached the level where a very elaborate DEM(Digital Elevation Map) can be obtained. However, there still exist many factors causing DEM error in stereo matching. This paper propose a new method to reduce the error caused by the lack of significant features in the correlation window The proposed algorithm keeps the correlation window as small as possible, as long as there is a significant feature in the window. Experimental results indicate that the proposed method increases the DEM accuracy by $72.65\%$ in the plain area and $41.96\%$ in the mountain area over the conventional scheme. Comparisons with Kanade's result show that the proposed method eliminates spike type of errors more efficiently than Kanade's adaptive window technique and produces reliable DEM.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.507-510
• /
• 2002

An algorithm of 3-D particle image velocimetry(3D-PIV) was developed for the measurement of 3-D velocity Held of complex flows. The measurement system consists of two or three CCD camera and one RGB image grabber. Flows size is $1500{\times}100{\times}180(mm)$, particle is Nylon12(1mm) and illuminator is Hollogen type lamp(100w). The stereo photogrammetry is adopted for the three dimensional geometrical mesurement of tracer particle. For the stereo-pair matching, the camera parameters should be decide in advance by a camera calibration. Camera parameter calculation equation is collinearity equation. In order to calculate the particle 3-D position based on the stereo photograrnrnetry, the eleven parameters of each camera should be obtained by the calibration of the camera. Epipolar line is used for stereo pair matching. The 3-D position of particle is calculated from the three camera parameters, centers of projection of the three cameras, and photographic coordinates of a particle, which is based on the collinear condition. To find velocity vector used 3-D position data of the first frame and the second frame. To extract error vector applied continuity equation. This study developed of various 3D-PIV animation technique.