• 수산해양기술연구
• /
• 제16권2호
• /
• pp.61-67
• /
• 1980

Previously, we had experimented on the model of stow net under the various combination including water velocity, spherical floats and elevating floats with the shearing hoods instead of the upper beam, however we couldn't concern with their characteristics. Spherical floats maintain their buoyancy at the same level when the speed increases, only the drag increases and effects some reduction in the fishing height. To eliminate this shortcoming, floats have to some hydrodynamic lifting force which increases with increasing speed. Phillips float with a dish-shaped metal plate welded on at the lower part and synthetic upthrusting float were used for the experiment to compare with their characteristics. Six kinds of model shearing hood depend on the angle of attack were used to test the characteristic of the shearing hood. According to their results, when the angle of attack is 30\ulcorner, the lift and drag coefficient reveal 1. 36, 0.84 respectively. And also experimented on the 5X8cm shearing hood to investigate the suitability for the model stow net.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.258-258
• /
• 2017

• 한국수산과학회지
• /
• 제12권4호
• /
• pp.201-207
• /
• 1979

재래식 안강망 어구를 축소비 1/40로 줄여서 전개 장치를 한 모형어구에 대하여 회류수조에서 실험한 결과를 요약하면 다음과 같다. 1) 모형어구의 저항은 수해와 암해르 부착했을 때 $R=1.66V^{1.02}$, 수해를 떼어내고 전개건과 뜸을 달았을 때 $R=3.11V^{1.54}$ (R:kg, V:m/sec)이며 실물에서 유속 1m/sec일 때 저항은 각각 5.2ton, 6.8ton정도이다. 2) **고는 모두직선적으로 감소하여 재래식에서는 h=89.22-2.42(V-15), $(V\geqq15)$, 전개건과 뜸을 달았을 때 h=89.20-0.87V, (h:cm V:cm/sec)이며 이것은 실물에서 유속 1m/sec일 때에도 **고는 약 20m 정도가 된다. **폭은 전개건줄의 길이로 조성할 수 있다. 3) **구의 단면적은 저속일 때는 비슷하나 유속 0.25m/sec 이상에서 전개건을 달았을 때가 월등히 증가하여 실물에서 유속 1.0m/sec일 때 약 $736m^2$가 된다. 어획효율도 단면적에 비례하므로 전개건을 달았을 때 그 효율은 1.53 이 된다. 4) 재래식 안****은 유속의 증가에 따라 옆판에 주름이 너무 많이 생기므로 적당한 성형율과 사단방법이 필요하다. 5) 전개건은 숫걸리줄, 암걸리줄 및 전개건줄의 길이와 그 결부위치의 조성으로 **고, **폭 및 **형을 어느정도 조성할 수 있으며, 정조시 전개건과 그 물이 어떤 상태에 있더라고 유속과 유향의 변화가 생기면 항상 전개력을 나타낼 수 있다.

• 수산해양기술연구
• /
• 제57권4호
• /
• pp.316-333
• /
• 2021

In order to understand basic data for improving the fishing system and fishing vessel structure in coastal improved stow net fishery, a questionnaire survey and on-site hearing were conducted from May 10 to June 11, 2019 to analyze opinions on the improvement of operation status and fishing vessel structure. The questionnaire survey consisted of ten questions on the operation status of coastal improved stow net fishery and six questions on the improvement of fishing vessel structure, and the results of each question were analyzed by the region, the captain's age, the captain's career and the age of fishing vessel. As a result of analyzing opinions on the operation status of the coastal improved stow net fishery, it was found that the average time required for casting net was 32.8 to 33.0 minutes and that the average time required for hauling net was 41.0 to 42.2 minutes which took 10 to 12 minutes more than for casting net. The most important work requiring improvement during fishing operation (the first priority) were 'hauling net operation,' 'readjustment and storage of fishing gear,' and 'fish handling' and the hardest factor in fishing management were in the order of 'reduction of catch,' 'labor shortage' and 'rising labor costs.' The most institutional improvement that is most needed in coastal improved stow net fishery was an 'using fine mesh nets.' Most of the respondent to the questions on the experience in hiring foreign crews was 'either hiring or willing to hire foreign crews,' and the average number of foreign crews employed was found to be 2.3 to 2.4 persons. The most important reason for hiring (or considering employment) foreign crews was 'high labor costs.' The degree of communication with foreign crews during fishing operation were 'moderate' or 'difficult to direct work.' The most important problem in hiring foreign crews (the first priority) was an 'illegal departure.' As the survey results on the opinion of structural improvement of coastal improved stow net fishing vessel, the degree of satisfaction with fishing vessel structure related to fishing operation was found to be somewhat unsatisfactory, with an average of 3.3 points on a five-point scale. The inconvenient structure of fishing vessel in possession (the first priority), the space needed most for the construction of new fishing vessel (the first priority) and the space considered important for the construction of new fishing vessel (the first prioprity) was a 'fish warehouse.' The most preferred equipment for the construction of new fishing vessel were 'engine operation monitoring' and 'navigation safety devices.' The average size (tonnage class), the average horse power and the average total length of fishing vessel for proper profit and safety fishing operation was between 13.8 and 14.0 tonnes, 808.3 to 819.5 H.P. and 23.4 to 23.5 meters, respectively. The results of the operation status of coastal improved stow net fishery and the requirement for improving the fishing vessel structure are expected to be provided as basic data for reference when we build or improve the fishing vessel.

• 수산해양기술연구
• /
• 제56권3호
• /
• pp.258-264
• /
• 2020

This study aimed to analyze the economic feasibility of the reduction of working safety accidents in stow net fishery through the prevention education to fishing crews. The benefit was evaluated by estimating insurance payment amount that was reduced through prevention education. The decreasing rate of working safety accidents was presumed to follow the experience in Japan. The cost was assumed as the cost of textbook development. Results indicated that IRR was estimated to be 79.9% in case of scenario assuming no additional operating costs while IRR was 56.3% in case of scenario assuming 10% additional operating costs. In addition, the economic feasibility would be secured when annual operating costs increased to 274 million won according to the result of sensitivity analysis.

• 한국수산과학회지
• /
• 제53권5호
• /
• pp.761-772
• /
• 2020

In order to study about species composition and community structure of fish in the coastal water off Boryeong were investigated from January 2018 to December 2019. A total of 10,863 individuals of 87 species of 44 families were collected. The dominant species were Liparis tanakai accounted for 19.8 percent of the total with Amblychaeturichthys hexanema and Collichthys niveatus accounted for 12.4 percent and 11.0 percent of the total number. A cluster analysis based on the Bray-Curtis similarity revealed that the fish community divided into two groups, According to season. The fish species that appeared summer and autumn were mainly migratory, while the fish species that appeared in spring and winter were mainly resident species. Fish caught by stow net had a high percentage of immature fish. It presented that coastal water off Boryeong is located an important spawning and nursery for fisheries resource.

• 수산해양기술연구
• /
• 제47권2호
• /
• pp.88-98
• /
• 2011

Experimental fishing was carried out to compare the catches of main species and bycatch according to the codend mesh size (raschel, 15mm, 25mm, 35mm, 45mm) of stow net on anchor in the coastal waters of Seocheon after manufacturing five kinds of fishing gears and commercial fishing boat (7.93 tons) was used for it. Anchovy (Engraulis japonicus), southern rough shrimp (Trachysalambria curvirostris), beka squid (Loligo beka), cuttle fish (Sepia esculenta), swimming crab (Portunus trituberculatus) were dominant on the five kinds of experimental fishing gears. Southern rough shrimp was caught from all kinds of fishing gears and catches of anchovy was highest in the raschel codend, southern rough shrimp for 15mm, 25mm, 35mm codend and beka squid for 45mm codend. Bycatch proportion against total catches was 623,376g (28.7%) for 2,171,844g in raschel, 11,932g (1.7%) for 704,451g in 15mm, 3,616g (1.6%) for 221,432g in 25mm, 9,276g (4.9%) for 191,052g in 35mm and 2,724g (5.3%) for 51,431g in 45mm.

• 수산해양기술연구
• /
• 제31권3호
• /
• pp.287-295
• /
• 1995

fishing boat is a specialized vessel which is intended to perform certain well defined tasks. Its size, deck-layout, carrying capacity and equipment are all related to its function in carrying out its planned operations. Therefore the process of fishing boat design is inherently combined with optimization of the design variables called the economic optimization criteria. Optimization then is a process in which minimum value of weight or cost is established through evaluation of consecutive designs in which one or more design parameters are varied. This paper is to study the basic-design of Stow-net fishing vessel in the Mok-Po region. The main task is developed the preliminary design model of engineering economic system in order to use optimization techniques from operation research the design problem needs to be expressed in terms of objective function and numerous constrains like : speed, fish hold capacity, fishing range, displacement and weight, ratio of main dimensions, etc. The objective function represents the criterion which is NPV such as the ratio of revene/cost. When using computers of limited capacity like P/C, the developed basic-design model of the economic optimization procedure must be simplified to V, Cb, L/B, Dv, Db and less than 15 constraint equations. The main conclusions of this study have attempted to show that economic considerations are essential in Stow-net fishing vessel basic design and operations, and that techno-economic evaluation is an important tool for the design of Stow-net fishing vessel in 69ton and 79ton.

• 수산해양기술연구
• /
• 제32권1호
• /
• pp.33-41
• /
• 1996

In order to obtain the most favourable classification system for fishing gears, the problems in the existing systems were investigated and a new system in which the fishing method was adopted as the criterion of classification and the kinds of fishing gears were obtained by exchanging the word method into gear in the fishing methods classified newly for eliminating the problems was established. The new system to which the actual gears are arranged is as follows ; (1)Harvesting gear \circled1Plucking gears : Clamp, Tong, Wrench, etc. \circled2Sweeping gears : Push net, Coral sweep net, etc. \circled3Dredging gears : Hand dredge net, Boat dredge net, etc. (2)Sticking gears \circled1Shot sticking gears : Spear, Sharp plummet, Harpoon, etc. \circled2Pulled sticking gears : Gaff, Comb, Rake, Hook harrow, Jerking hook, etc. \circled3Left sticking gears : Rip - hook set line. (3)Angling gears \circled1Jerky angling gears (a)Single - jerky angling gears : Hand line, Pole line, etc. (b)Multiple - jerky angling gears : squid hook. \circled2Idly angling gears (a)Set angling gears : Set long line. (b)Drifted angling gears : Drift long line, Drift vertical line, etc. \circled3Dragged angling gears : Troll line. (4)Shelter gears : Eel tube, Webfoot - octopus pot, Octopus pot, etc. (5)Attracting gears : Fishing basket. (6)Cutoff gears : Wall, Screen net, Window net, etc. (7)Guiding gears \circled1Horizontally guiding gears : Triangular set net, Elliptic set net, Rectangular set net, Fish weir, etc. \circled2Vertically guiding gears : Pound net. \circled3Deeply guiding gears : Funnel net. (8)Receiving gears \circled1Jumping - fish receiving gears : Fish - receiving scoop net, Fish - receiving raft, etc. \circled2Drifting - fish receiving gears (a)Set drifting - fish receiving gears : Bamboo screen, Pillar stow net, Long stow net, etc. (b)Movable drifting - fish receiving gears : Stow net. (9)Bagging gears \circled1Drag - bagging gears (a)Bottom - drag bagging gears : Bottom otter trawl, Bottom beam trawl, Bottom pair trawl, etc. (b)Midwater - drag gagging gears : Midwater otter trawl, Midwater pair trawl, etc. (c)Surface - drag gagging gears : Anchovy drag net. \circled2Seine - bagging gears (a)Beach - seine bagging gears : Skimming scoop net, Beach seine, etc. (b)Boat - seine bagging gears : Boat seine, Danish seine, etc. \circled3Drive - bagging gears : Drive - in dustpan net, Inner drive - in net, etc. (10)Surrounding gears \circled1Incomplete surrounding gears : Lampara net, Ring net, etc. \circled2Complete surrounding gears : Purse seine, Round haul net, etc. (11)Covering gears \circled1Drop - type covering gears : Wooden cover, Lantern net, etc. \circled2Spread - type covering gears : Cast net. (12)Lifting gears \circled1Wait - lifting gears : Scoop net, Scrape net, etc. \circled2Gatherable lifting gears : Saury lift net, Anchovy lift net, etc. (13)Adherent gears \circled1Gilling gears (a)Set gilling gears : Bottom gill net, Floating gill net. (b)Drifted gilling gears : Drift gill net. (c)Encircled gilling gears : Encircled gill net. (d)Seine - gilling gears : Seining gill net. (e)Dragged gilling gears : Dragged gill net. \circled2Tangling gears (a)Set tangling gears : Double trammel net, Triple trammel net, etc. (b)Encircled tangling gears : Encircled tangle net. (c)Dragged tangling gears : Dragged tangle net. \circled3Restrainting gears (a)Drifted restrainting gears : Pocket net(Gen - type net). (b)Dragged restrainting gears : Dragged pocket net. (14)Sucking gears : Fish pumps.

• 한국어류학회지
• /
• 제25권2호
• /
• pp.119-134
• /
• 2013

서해 아산만의 경기도 화성 연안 안강망어장에서 2011년 3월부터 2012년 2월까지 어류군집 조사를 실시하였다. 조사기간 동안 채집된 어종은 총 71종, 개체수 608,801마리 그리고 생체량은 795,503.3 g이었다. 이중 개체수에서 멸치가 592,926마리로 전체의 97.3%를 차지하여 가장 많았다. 다음으로 흰베도라치(0.9%), 쉬쉬망둑(0.4%), 전어(0.2%), 줄공치(0.1%), 도화망둑(0.1%) 등이었으나 소량이었다. 생체량 면에서는 역시 멸치가 622,815.8 g으로 전체의 78.2%를 차지하여 최우점하였고, 기타 쉬쉬망둑(5.1%), 꼼치(2.4%), 문치가자미(2.2%), 홍어(1.8%) 등의 순이었다. 표층해역에서 채집된 어류는 총 59종, 개체수 190,406마리, 생체량 241,113.4 g이었으며, 저층해역에서는 총 61종, 개체수 418,395마리, 생체량 554,389.9 g의 어류가 채집되었다. 어류군집은 계절에 따라 많이 달랐는데, 어종수가 많았던 2011년 3월부터 5월 그리고 2012년 1월과 2월에는 개체수와 생체량이 적었으며, 대신에 어종수가 적었던 2011년 6월부터 12월까지는 개체수와 생체량이 많이 증가하였다. 이는 우점종인 멸치의 어장가입과 주로 관련이 있었다.