• 한국지진공학회논문집
• /
• 제6권6호
• /
• pp.7-15
• /
• 2002

본 논문에서는 다자유도계 구조물의 진동대 실험결과 분석에서 효율적인 지진손상도 평가 및 소성모형 추정을 목적으로, 계측결과를 각 부재별 소성이력으로 환산하고 이 소성이력에 대해 비선형 계수 추정법을 적용하는 다단계 방안을 연구하였다. 이때, 추정된 부재별 소성이력은 부재별 지진 손상도를 평가하는 지표로 활용될 수 있으며, 추정된 비선형 모형 계수를 이용하여 구축된 비선형 다자유도계 구조는 다양한 구조재해석의 모형으로 활용될 수 있다. 제시된 방법의 검증을 위해, 해석적 방법과 실험적 방법의 예제해석이 수행되었다. 예제해석 결과는 해석적 방법과 실험적 방법 모두에서 본 논문의 방법이 매우 효과적임을 보여 주고 있다.

• Structural Monitoring and Maintenance
• /
• 제10권2호
• /
• pp.133-154
• /
• 2023

Obscured structural members are mostly under-evaluated during condition assessment due to lack of visual inspection capability. Insufficient information about the integrity of these structural members poses a significant risk for public safety. Time domain reflectometry (TDR) is a novel approach in structural health monitoring (SHM). Ordinary coaxial cables "as is" without a major modification are not suitable for SHM with TDR. The objective of this study is to propose a practical and cost-effective modification approach to commercially available coaxial cables in order to use them as a "cable sensor" for damage detection with the TDR equipment for obscured structural members. The experimental validation and assessment of the proposed modification approach was achieved by conducting 3-point bending tests of the model piles as a representative obscured structural member. It can be noted that the RG59/U-6 and RG6/U-4 cable sensors expose higher strain sensitivity in comparison with non-modified "as is" versions of the cables used. As a result, the cable sensors have the capability of sensing both the presence and the location of a structural damage with a maximum aberration of 3 cm. Furthermore, the crack development can be monitored by the RG59/U-6 cable sensor with a simple calibration.

• Journal of the Korean Wood Science and Technology
• /
• 제31권6호
• /
• pp.45-54
• /
• 2003

The density and strength of wood is affected by degradations and defects, such as voids and knots. Old wooden structures such as traditional cultural properties have been deteriorated by these types of defects. They were evaluated by a visual observation that is difficult to evaluate the inner deterioration in structures. In this study, three nondestructive testing techniques were investigated to detect the wooden structural members. Ultrasonic stress wave tests, drilling resistance tests and visual inspections were used to examine the structural wood members. Patterns of Resistograph using by drilling resistance tests could indicate the features of internal wood such as voids, knots, decay, fungi, and so on. The technique just like as ultrasonic stress wave tests, however, difficult to detect exactly area where small amounts of internal deterioration in logs are. In spite of results of ultrasonic stress wave test, the internal deterioration of wooden structural members could be evaluated by the relationship between ultrasonic stress wave tests and drilling resistance tests.

• Structural Engineering and Mechanics
• /
• 제7권3호
• /
• pp.303-318
• /
• 1999

Cracking of reinforced concrete flexural members is a highly random phenomenon. In this paper reliability models are presented to determine the probabilities of failure of flexural members against the limit states of first crack and maximum crackwidth. The models proposed take into account the mechanism of cracking. Based on the reliability models discussed, Eqs. (8) and (9) useful in the reliability-based design of flexural members are presented.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.29-32
• /
• 2006

Different from new or reconstruction of an apartment housing, the structural safety in the remodelling construction can be obtained through the repair and strengthening process based on the safety diagnosis and evaluation of structural performance. In this study, structural performance of existing members such as, reinforced concrete slabs, beams and columns are investigated through experimental tests. The structural members were obtained from the existing apartment housing which will be demolished. Test results showed that most specimens have a sufficient structural capacity except for some special case, for example, specimens with severe cracks or concrete loss due to improper casting. This same severe deteriorated or defective structure members originated from bad concrete casting or careless construction process should be repaired and strengthened before an remodelling construction.

• 한국전산구조공학회논문집
• /
• 제22권4호
• /
• pp.349-354
• /
• 2009

초고층 건물의 안전성 및 사용성을 합리적으로 확보하고 유지하기 위해서 부재의 구조 반응 모니터링은 필요하다. 이러한 대형 건물의 건전도 모니터링은 최근 들어 많은 연구자들에 의해서 관심 되어지고 있지만 건물 특성상 계측 대상 부재가 많고 하중과 구조반응의 관계가 복잡하기 때문에 센싱 부재 선정의 어려움으로 그 적용에 한계가 있다. 본 논문에서는 부재의 변위기여도 및 변형에너지밀도를 기반으로 초고층 건물의 안전성 모니터링을 위한 구조반응 계측 부재 선정에 대한 연구를 수행하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 가을 학술발표회 논문집
• /
• pp.202-207
• /
• 1992

The objective of this study is to develop analytical techniques of polymer impregnated concrete flexural members for its proper applications. crystalline methylmethacrylate(MMA) is chosen as a monomer of polymer impregnants, On the basis of members. fracture toughness, fracture energy , critical crack width, and tension softening relations near crack tip are formulated in terms of member depth, initial notch length and the flexural strength of normal concrete. The structural analysis rocedure and the finite element computer program developed in the study are applicable to evaluate elastic behavior, ultimate strength, and tension softening behavior of MMA type PIC structural members subject to various loading conditions. It is concluded that the developed structural analysis procedure and the finite element computer program are applicable to analysis and design of in-situ and precast PIC structural members.

• Journal of the Korean Wood Science and Technology
• /
• 제33권2호통권130호
• /
• pp.1-7
• /
• 2005

Tree species of wooden structural members of the Beomeo Temple were identified based on light and scanning electron microscopic characters in the present study. Of 10 structural members, 9 softwoods and 1 hardwood were identified. Among softwood members, 7 belonged to hard pine of the Sylvestris section, and the remaining 2 to hard pine of other than the Sylvestris section and hemlock of the genus Tsuga, respectively. A single hardwood member was identified as white oak of the Prinus section under the subgenus Lepidobalanus.

• 건축역사연구
• /
• 제20권4호
• /
• pp.81-94
• /
• 2011

The purpose of the study, approaching from the aspect of the construction technologies, is to determine the architectural techniques of traditional wood architects in existence, through which the systems and techniques that create the inherent characteristics of Korean architecture are clarified. With understanding traditional construction system and focusing on the fact that built environment results from the consistent standards and technologies of architects, this study inquires into the systematic standard and its formation that present in the process of planning for the overall scale and shape of a building from the study determines dimension of structural members. All the members that constitute the structure are trimmed in advance and assembled in a short period of time on the site. Because of that, the dimensions for trimming and assembling are predetermined according to designated standards in the planning process, therefore consistent standard of computation are in necessity to design shapes and sizes of enormous amount of structural members. This study also shows the standards of measurement employed by architects while planning for structural members of a building, and how the size and range of its composition are developed.

• 한국지진공학회논문집
• /
• 제3권1호
• /
• pp.93-102
• /
• 1999

건물의 고층화가 이루어지면서 구조부재에 미치는 축력이 증가하게 되고 축소현상을 발생시킨다. 이러한 축소현상은 구조물의 사용헝 저하를 가져올뿐만아니라 2차 응력 발생으로 구조물 자체의 안전에도 영향을 미친다. 수직구조부재의 축소량을 예측하는 목적은 인접 부재간의 부등축소를 보정하는 데 있다 본 논문에서는 시공과정에서만 보정을 실시한 경우와 설계단계에서 축소량을 예측하여 보정을 한 경우에 대해 각각 지진하중을 적용하여 구조부재에 미치는 영향에 대해 비교.검토를 하였으며 수직구조부재의 축소량은 반드시 예측되어 보정을 실시하여야 하는 것으로 나타났다.