• Bulletin of the Korean Chemical Society
• /
• v.19 no.12
• /
• pp.1351-1355
• /
• 1998

A simple apparatus for adding a modifying solvent to supercritical CO2 extractant was described. Small, fixed volumes (typically 100 μL) of liquid modifying solvents were delivered during the extraction process by use of an in-line high pressure loop injector and an air pump. Without disconnecting the extraction cell from the supercritical fluid extraction system, the modifying solvent was repeatedly delivered. The solvent modification device was optimized during the extraction of carbaryl and bis(acetylacetonato) copper(Ⅱ). Extraction recoveries from spiked filter paper and soil samples ranged between 22% and 109%, depending on the analyte and matrix components. The addition of polar modifying solvents were necessary to improve the extractability of the nonpolar CO2.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.669-675
• /
• 1991

Based on process analysis as well as extensive operation experience, two fuzzy expert control algorithms, for startup and control, are proposed for a supercritical fluid extraction process which has high interacting multivariable structure. In the proposed algorithms, a new simple defuzzification method which only requires four fundamental arithmetic rules is also presented. Through numerical simulations, control performance using the proposed control algorithm is compared with that of a different fuzzy algorithm by an other researcher and that of conventional PID-type controllers which are tuned by well-known optimal criteria. Also, the proposed control algorithm has been tested to the bench scale supercritical fluid extraction process. As a consequence, the proposed fuzzy expert controller has shown fast and robust control performance while the other controllers show sluggish and/or highly oscillatory responses.

• KSBB Journal
• /
• v.29 no.6
• /
• pp.405-413
• /
• 2014

In this study, gemcitabine (Gem)-Poly(L-lactic acid) (PLLA) conjugates were synthesized through an amide linkage reaction. Then, the microparticles of Gem-PLLA/PLLA blends containing gemcitabine were prepared using a supercritical fluid process, called aerosol solvent extraction system (ASES). Gemcitabine-loaded Gem-PLLA/PLLA microparticles obtained from the ASES process showed a spherical shape. The amount of gemcitabine released after 30 day incubation in a phosphate buffer solution of pH 7.4 was about 90% of the total amount of gemcitabine present in the product.

• KSBB Journal
• /
• v.16 no.1
• /
• pp.66-70
• /
• 2001

Factors affecting the supercritical carbon dioxide extraction of camptothecin(CPT) and 10-hydroxycamptothecin(HCPT) from the dried powder of Cmptotheca acuminata were studied. Only a few amount of CPT and HCPT was extracted with pure supercritical carbon dioxide. Methanol and ethanol were efficient modifiers to extract CPT and HCPT. At $40^{\circ}C$, 250 bar, 1 mL/min flow rate, 41% of CPT and 35% of HCPT were extracted with supercritical carbon dioxide modified with 16% of methanol. The diffusion effect of HCPT on extraction efficiency was studied in this solid-fluid system. Round matrix hot-ball model assumption revealed that the value of D/$r^2$ was 0.0072 $min^{-1}$ which was higher than that of solvent extraction with methanol.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2012

In this study, we employed hydroxypropyl-${\beta}$-cyclodextrin (HP-${\beta}$-CD) as an excipient to produce poly(lactic-$co$-glycolic acid) (PLGA) fine particles by a supercritical fluid process, called aerosol solvent extraction system (ASES), and investigated the effect of HP-${\beta}$-CD content on the morphology of the particles. The influence of HP-${\beta}$-CD on the drug release characteristics of paclitaxel-loaded PLGA particles was also evaluated. Fine particles were obtained when the HP-${\beta}$-CD content in PLGA/HP-${\beta}$-CD mixtures was greater than 40% and 30%, respectively, for PLGA(75:25) and PLGA(50:50), whereas a film-like precipitate was obtained for lower HP-${\beta}$-CD content. The release rate for paclitaxel loaded PLGA(75:25)/HP-${\beta}$-CD particles was found to increase with HP-${\beta}$-CD content.

• Archives of Pharmacal Research
• /
• v.28 no.7
• /
• pp.866-874
• /
• 2005

The objective of this study was to elucidate the feasibility to improve the solubility and bioavailability of poorly water-soluble itraconazole via solid dispersions by using supercritical fluid (SCF). Solid dispersions of itraconazole with hydrophilic polymer, HPMC 2910, were prepared by the aerosol solvent extraction system (ASES) under different process conditions of temperature/pressure. The particle size of solid dispersions ranged from 100 to 500 nm. The equilibrium solubility increased with decrease (15 to 10 MPa) in pressure and increase (40 to $60^{\circ}C$) in temperature. The solid dispersions prepared at $60^{\circ}C$/15 MPa showed a slight increase in equilibrium solubility (approximately 27-fold increase) when compared to pure itraconazole, while those prepared at $60^{\circ}C$/10MPa showed approximately 610-fold increase and no endothermic peaks corresponding to pure itraconazole were observed, indicating that itraconazole might be molecularly dispersed in HPMC 2910 in the amorphous form. The amorphous state of itraconazole was confirmed by DSC/XRD data. The pharmacokinetic parameters of the ASES-processed solid dispersions, such as $T_{max},\;C_{max},\;and\;AUC_{0-24h}$ were almost similar to $Sporanox_{\circledR}$ capsule which shows high bioavailability. Hence, it was concluded that the ASES process could be a promising technique to reduce particle size and/or prepare amorphous solid dispersion of drugs in order to improve the solubility and bioavailability of poorly water-soluble drugs.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.3
• /
• pp.243-248
• /
• 2004

Essential oils from Needl Juniperrus seed and trunk (Juniperrus rigida Sieb.) and Olibanum resin (Boswellia carteii Birew) were extracted by a supercritical fluid extraction system (SFE) and immune activity of each essential oils were observed. The immune activities of each essential oil were compared. Essential oil from Olibanum resin enhanced the growth of human immune T cell up to 1.33 times, compared to control group. Each essential oils showed the potent inhibitory effect on the human cancer cell lines, and increased the secretion of cytokines, IL-6 and $TNF-{\alpha}$ from human B cell as well as the growth of human immune cells.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.2
• /
• pp.115-121
• /
• 2003

Essential oils from Fennel fruit(Foeniculum vulgare Mill), Olibanum resin(Boswellia carteii Birew) and Needl Juniperus stem(Juniperus rigida Sieb.) were extracted by a supercritical fluid extraction system(SFE) and biological activity of each essential oils were observed. SFE technique was applied for the isolation and purification of nonpolar biologically active essential oils from each samples. The quantitative analysis of essential oils was carried out by gas chromatography-mass spectrometer(GC/MS). About 60% of the growth of AGS and A549 cells were inhibited by adding 1.0g/l of the crude essential oils and below 40% was observed by the control. Cytotoxicity on human normal lung cell(HEL299) was scored as $15{\sim}18%$ for the crude essential oils and 12% for control, respectively. It meant that the essential oils were more effective than the control in anti-mutagenecity tested by CHO V79 cells. The effect of the essential oils on the growth of nerve cells, PC12 was observed as follows: The viable cell density was about two times higher than control.

• KSBB Journal
• /
• v.26 no.1
• /
• pp.69-77
• /
• 2011

In this study, poly (L-lactic acid) (PLLA) microparticles containing gemcitabine hydrochloride were prepared by a supercritical fluid process, called aerosol solvent extraction system (ASES), utilizing supercritical carbon dioxide as antisolvent. The influence of process parameters such as temperature, pressure, $CO_2$ and solution flow rate, solution concentration, and feed ratio of drug to polymer on the morphology and characteristics of the microparticles was studied in detail. The gemcitabine-loaded microparticles exhibited a spherical shape with a smooth surface. The entrapment efficiency of gemcitabine increased with increasing temperature, solution concentration and $CO_2$ flow rate and with decreasing drug/polymer feed ratio. The maximum drug loading obtained from the ASES process was found to be about 11%. The ASES-processed PLLA microparticles containing gemcitabine showed a relatively high initial burst due to the presence of surface pores on the microparticles and the poor affinity between drug and polymer.

• Microbiology and Biotechnology Letters
• /
• v.44 no.1
• /
• pp.62-67
• /
• 2016

Hydrolytic enzyme activities, including those of ${\beta}$-glucosidase, ${\beta}$-glucuronidase, ${\beta}$-xylosidase, ${\beta}$-galactosidase, ${\beta}$-arabinofuranosidase, ${\beta}$-arabinosidase, and ${\beta}$-arabinopyranosidase, which are useful for bioconversion, were explored in lactic acid bacteria isolated from Korean traditional fermented foods. Nine bacterial strains were selected for the fermentation of green tea extract prepared by supercritical fluid extraction. Changes in the concentrations of catechin, epicatechin, epicatechin gallate, epigallocatechin, and epigallocatechin-3-gallate in green tea extract were investigated after fermentation by the selected lactic acid bacteria strains. The strain Leuconostoc mesenteroides MBE1424, which showed the highest ${\beta}$-glucuronidase enzyme activity among the tested bacterial strains, increased the epigallocatechin content of the green tea extract by 60%. In addition, L. mesenteroides MBE1424 was more resistant than the control strain at high temperature and showed a maximum specific growth rate at $40^{\circ}C$. L. mesenteroides MBE1424 was presumed to have an enzyme system containing ${\beta}$-glucuronidase with utility in the bioconversion of green tea extract.