• Korean journal of food and cookery science
• /
• v.14 no.2
• /
• pp.168-176
• /
• 1998

The breadmaking characteristics of composite flour containing 30% of buckwheat and 70% of wheat with the addition of vital wheat gluten and water-soluble gums, were studied to establish the optimum formula for the development of buckwheat bread. The addition of vital wheat gluten or/and gums led to successful formation of buckwheat bread, giving loaf volume increase and improvement of sensory quality, especially texture determined by QDA (Quantitative Descriptive Analysis). Among those additives, xanthan gum showed the best volume expansion. Synergistic effects on bread quality were observed when the vital wheat gluten and xanthan gum or guar gum were used together. As buckwheat flour was substituted for wheat flour, gelatinization started early and the maximum viscosity increased measured by an amylography. The addition of gluten and gums caused the initial gelatinization to occur at a higher temperature and maximum viscosity to decrease.

• Korean journal of food and cookery science
• /
• v.19 no.6
• /
• pp.777-782
• /
• 2003

This study was carried out to investigate the characteristics of mulberry fruit seolgidduk. Four percent additions of mulberry were evaluated as the most suitable concentration for seolgidduk, in order to improve the color of gum metal gray and sour smell. Therefore, in order to improve the preference, citric acid was added. The acidity of mulberry fruit seolgidduk increased and its pH decreased significantly by increasing the amount of citric acid. The moisture content of mulberry fruit seolgidduk showed no significant difference between the groups with added citric acid and the control group. The L value decreased as the citric acid concentration increased. Color a and b (Ed-define 'a' and 'b') values increased significantly by increasing the mont of citric acid. The hardness, cohesiveness, springiness, gumminess and brittleness decreased as the citric acid was added. From the sensory evaluation, mulberry fruit seolgidduk with 0.01％ citric acid added was the most preferred in taste, chewiness and overall acceptability. These results indicated that mulberry fruit stolgidduk with 0.01％ citric acid added showed the best quality.

• Food Science of Animal Resources
• /
• v.37 no.3
• /
• pp.360-367
• /
• 2017

This study was conducted to investigate the effect of duck skin on cooking loss, emulsion stability, pH, color, protein solubility, texture profile analysis (TPA), apparent viscosity, and sensory characteristics of press type duck ham with different ratio of duck breast meat and duck skin. Five duck ham formulations were produced with the following compositions: T1 (duck breast 70% + duck skin 30%), T2 (duck breast 60% + duck skin 40%), T3 (duck breast 50% + duck skin 50%), T4 (duck breast 40% + duck skin 60%), and T5 (duck breast 30% + duck skin 70%). The cooking loss and fat separation were lower in T1, and the total expressible fluid separations were lower in T1 and T2 than others. The pH ranged from 6.48 to 6.59, with the highest values in T4 and T5. T5 had the highest CIE $L^*$-value, and T1 and T2 had the highest CIE $a^*$-values; however, CIE $b^*$-values did not differ significantly between the duck ham samples. The protein solubility and TPA (hardness, springiness, cohesiveness, gumminess, and chewiness) were the highest in T1. T1 and T2 had higher scores for color, tenderness, and overall acceptability. T1, T2, and T3 showed significantly higher values, but there were no significant differences for flavor and juiciness. Regarding apparent viscosity properties, T1 and T2 had higher viscosity values than the other formulations. In conclusion, the T1 (duck breast 70% + duck skin 30%) and T2 (duck breast 60% + duck skin 40%) duck hams show the highest quality characteristics.

• Spatial Information Research
• /
• v.10 no.2
• /
• pp.247-261
• /
• 2002

There are much damage of people and property because of heavy rain every year. Especially, there are problem to major facility such as dam, bridge, road, tunnel, and industrial complex in the ground stability. So the counter plan for landslide or ground failure must be necessary In the study, the technique of regional landslide susceptibility assessment near the Ulsan petrochemical complex and Kumgang railway bridge was developed and applied using GIS. For the assessment, the geological structures such as bedding and fault were surveyed and the geological structure, topographic, soil, forest, and land use spatial database were constructed using CIS. Using the spatial database, the factors that influence landslide occurrence, such as slope, aspect, curvature and type of topography, texture, material, drainage and effective thickness of soil, type, age, diameter and density of forest, and land use were calculated or extracted from the spatial database. For application of geological structure, the geological structure line and fault density were calculated. Landslide susceptibility was analyzed using the landslide-occurrence factors by probability method that is summation of landslide occurrence probability values per each factors range or type. The landslide susceptibility map can be used to assess ground stability to protect major facility.

• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.94-101
• /
• 2009

A novel method for the reconstruction of 3D shape and texture from elemental images has been proposed. Using this method, we can estimate a full 3D polygonal model of objects with seamless triangulation. But in the triangulation process, all the objects are stitched. This generates phantom surfaces that bridge depth discontinuities between different objects. To solve this problem we need to connect points only within a single object. We adopt a segmentation process to this end. The entire process of the proposed method is as follows. First, the central pixel of each elemental image is computed to extract spatial position of objects by correspondence analysis. Second, the object points of central pixels from neighboring elemental images are projected onto a specific elemental image. Then, the center sub-image is segmented and each object is labeled. We used the normalized cut algorithm for segmentation of the center sub-image. To enhance the speed of segmentation we applied the watershed algorithm before the normalized cut. Using the segmentation results, the subdivision process is applied to pixels only within the same objects. The refined grid is filtered with median and Gaussian filters to improve reconstruction quality. Finally, each vertex is connected and an object-based triangular mesh is formed. We conducted experiments using real objects and verified our proposed method.

• Food Science and Preservation
• /
• v.13 no.4
• /
• pp.450-456
• /
• 2006

The favorable effect of ascorbic acid and cysteine on the improvement of rice bread quality was investigated by creating and comparing 6 experimental rice breads(RB-1 to RB-6). The RB-3 showed a relatively higher loaf volume, specific loaf volume and bread yield than the other breads. Crust and crumb color of breads were measured using a Hunter celery meter. The RB 5 and RB 6 showed the higher cut L-value than the other broads. As the proportion of the rice in the experimental breads increased, both the crust L-value and the crumb L-value showed higher values. According to the texture profile analysis, the hardness of the RB-1 to RB-3 were lower than those of the other breads. The springness of the experimental broads increased as the percentage of the rice in the breads increases. However, less proportions of rice to breads provided significantly lower level of the chewiness. The cohesiveness did not show any specific pattern by the proportion of rice to breads. The degree of retrogradation of the breads was accelerated when the breads contained more rice or when the breads had neither ascorbic acid nor cysteine. Therefore, RB 3, which contained ascorbic acid and cysteine and less rice, showed the highest retardation in the degree of retrogradation. In addition, the RB 3 showed the highest overall acceptance scores by sensory evaluation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.88-93
• /
• 2005

The functional vice (Oryza sativa L.) has been highly regarded recently, in the change of rice maykets in the world. Goami2 (GA), one of the functional rice varieties, was developed from high-quality rice, Ilpumbyeo (IP). From the previous study, GA has been proved its beneficial effect on the improvement of metabolic control and body weight reduction especially in obesity, We could certain that GA was very difficult to be gelatinized due to the micro lump shown in the Scanning electron micrographs (SEM) photos. To improve its cooking quality, we investigated the changes of physicochemical properties, which were differentiated by the conditions of milling and blending. As GA was milled every $2\%$ until eliminating $12\%$, the nitrogen content was decreased linearly. But the decreasing rate of nitrogen content of GA during milling process was relatively lower than that of IP. Thus, we assumed that GA has relatively high nitrogen in inner starch of grain. The degree of milling had no effect on the gelatinization of cooked GA, but affected lightness and whiteness linearly, which were ranged in normal values when the rice was milled more than $10\%$ in weight. So we could concluded that the milling process was not proper to improve cooking quality of GA. And we could suggested that GA was needed to soak into water at least one hour before cooking by it water absorption rate at normal temperature$(21^{\circ}C)$ and sensory evaluation. From the texture analysis, cooked GA had higher hardness than other varieties. Therefore, we blended GA with IP, Baekjinju(BJ) and Hwasunchalbyeo(HS), then subjected to sensory evaluation. All evaluation items including the sensory preference were the highest scores for the rice blended with glutinous rice varieties, BJ and HS.

• Journal of Dairy Science and Biotechnology
• /
• v.33 no.1
• /
• pp.17-25
• /
• 2015

The present study was carried out to evaluate the preparation of the fermented milks with rice bran and to prove that the bacteria used are necessary for providing amino acids in this process. The rice bran on fermented milk with Streptococcus thermophilus (ST-body1) and Lactobacillus casei (LC-10). The fermentation limit was set until acidimetry score reaches 1. There are reports of titratable acidity, pH, viable cell count and amounts of organic acids affecting amino acid production about physical and chemical analysis measured using HPLC. Finally, sensory test was surveyed. In this study, the rate of acidification was higher in the fermented milk with rice bran than in the common fermented milk. In case of the number of cells was $1.0{\times}10^8CFU/mL$ in group. The lactic acid and citric acid content in yogurts prepared with rice bran using Streptococcus thermophilus (ST-body1) and Lactobacillus casei (LC-10) was higher than that in the control yogurt. Amino acids derived by rice bran were effected in fermentation for each bacteria's necessary amino acid production, and it made bacteria growth larger. From the physical test of the fermented milk with rice bran, flavor, texture, sweetness, overall taste of the fermented milk of Streptococcus thermophilus (ST-body1) were found to be much better than those of the other groups. The results obtained for the fermented milk prepared with rice bran using Streptococcus thermophilus (ST-body1) are significant.

• Korean Journal of Food Science and Technology
• /
• v.45 no.2
• /
• pp.180-190
• /
• 2013

The purpose of this study was to determine the optimal amount of 2 ingredients, i.e., black barley flour ($X_1$), and olive oil ($X_2$), for the production of white pan bread from black barley flour. The experiment was designed according to the central composite design of response surface methodology, which showed 10 experimental points, including 2 replicates for black barley flour and olive oil. Significant differences were found in the results of the physical and mechanical properties analysis of each sample, including weight (p<0.05), volume (p<0.01), specific loaf volume (p<0.01), color L (p<0.01), color a (p<0.001), color b (p<0.05), hardness (p<0.001), springiness (p<0.01), cohesiveness (p<0.01), gumminess (p<0.001) and chewiness (p<0.05). Significant differences in the sensory measurements were observed in color (p<0.01), appearance (p<0.01), texture (p<0.05), taste (p<0.05) and overall quality (p<0.05). The optimum formulation, which was calculated using the numerical and graphical methods, was determined to be 18.00% black barley flour and 1.80% olive oil.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.2
• /
• pp.81-85
• /
• 1989

The 113 soils representing the Jisan soil series (fine loamy, mixed, mesic fluventic Haplaquepts) as mapped in Korea were to characterize the Jisan soil throughout its official range which was the range of properties used to establish series limits. The samples were stratified according to master horizon designation for statistical analysis. The means in selected soil properties, horizon thickness, solum thickness, soil texture, clay content, pH, BSP, and horizon sequence, were within acceptable limits. The minimum values were considerably lower than the lower limits of the official ranges while the maximum values were above the allowable amount. The ranges of definition degree which mean the test of proper placement of any marginal limits were 0.687 to 0.929. Thus, Jisan series as mapped from other soil bodies in the field could be seen similarities and understood relationships among individuals.