• 대한원격탐사학회지
• /
• 제23권2호
• /
• pp.103-111
• /
• 2007

지금까지 위성영상 정보 처리 분야에서는 분광정보를 이용한 영상분석과 시각적 해석 및 자동 분류에 대한 연구가 주로 수행되었으나, 최근에는 영상자료에서 시각적으로 나타나지 않는 특성이나 공간정보의 추출을 위한 여러 시도가 이루어지고 있다. 본 연구에서는 영상정보의 특성 추출기법인 텍스처 영상 생성기법과 웨이브릿 변환을 연계하여 웨이브릿 기반 텍스처 융합 영상에 대한 연구를 수행하였다. 또한 이러한 영상이 분류 정확도에 어떻게 기여하는 가를 분석하기 위한 적용 사례로 도심지 공간분석과 칼데라 주변지역의 지질학적 구조분석을 수행하였다 영상 분석 시 공간정보 활용을 위한 텍스처 영상 생성기법과 웨이브릿 기반 텍스처 융합 영상 생성기법을 사용하면 원본영상만을 사용하였을 때보다 높은 분류정확도를 보였다. 고해상도 영상을 사용한 도심지의 경우 원본영상에 텍스처영상과 웨이브릿 기반 텍스처 융합 영상을 모두 활용한 경우의 분류정확도가 가장 높은 값을 보였다. 이는 상세화소의 변화가 매우 중요한 도심지의 특성상, 세밀한 공간정보가 최대로 활용되었기 때문으로 해석되어진다. 또한 중 저해상도 영상을 사용한 지질학적 구조분석의 경우 원본영상에 텍스처 영상만을 활용한 경우가 가장 높은 분류정확도를 보였다. 이는 칼데라를 중심으로 한 비교적 크기가 큰 지질학적 구조 분석 시 고도변화와 지열분포 등의 정보가 적당히 단순화 될 필요가 있었기 때문인 것으로 해석된다. 따라서 이러한 기법들을 실제 연구에 적용하기 위해서는 연구의 목적과 위성영상의 해상도 등의 정보를 모두 고려하여 적절한 기법을 잘 적용하는 것이 중요하다.

• 한국전기전자재료학회논문지
• /
• 제16권10호
• /
• pp.938-945
• /
• 2003

We fabricated Ni-substrate for YBCO coated conductors and evaluated the effects of pressing and annealing temperature and time on texture. Ni substrate was fabricated by powder metallurgy technique and compacts were prepared by applying uniaxial or isostatic pressure. The texture of substrate made by applying cold isostatic pressure (CIP) was stronger than that by uniaxial pressure which we attribute to the fact that the CIP method provided higher density and more uniform density distribution. It was observed that the substrate annealed at 400 C showed both retained texture and recrystallized texture. On the other hand, the texture of substrate significantly improved at annealing temperature above 500 C, forming strong 4-fold symmetry, [111] II ND texture, and FWHM of 9∼10 . It is to be noted that the degree of texture was almost independent of annealing temperature (500∼1000 C) and annealing time(1∼54 min, at 1000 C). EBSD and AFM analysis indicated that 99% of grain boundaries was low angle grain boundary and RMS was approximately 3 nm, respectively. Development of strong cube texture and high fraction of low angle grain boundary of Ni-substrate made by powder metallurgy technique in our study is considered to be suitable for the application of YBCO coated conductors.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.14-16
• /
• 2004

Although there have been wide range of studies to characterize forest stands based upon spectral information of satellite image, it was not fully understood the texture information of forest stand using high resolution data. The objective of this study is to evaluate several texture measures for characterizing forest stand structure, such as species composition, diameter at breast height(DBH), stand density, and age. High resolution IKONOS satellite imagery data were acquired in August 200 lover the forested area near Ulsan, Korea. Primary forest types were plantation pine, mixed forest, and natural deciduous forest of stand age ranging from 10 to 50 years old. Several GLCM-based texture measures were compared with forest stand characteristics. In overall, a texture measure (contrast) calculated using red band were better to differentiate species and age group than other texture measures and near infrared bands.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1996년도 Proceedings International Workshop on New Video Media Technology
• /
• pp.23-28
• /
• 1996

Model-based coding is one of several approaches to very low bit rate image coding and it can be used in many applications such as image creation and virtual reality. However, its analysis and synthesis processes remain difficult, especially in the sense that the resulting synthesized image reveals some degradation in detailed facial components such as furrows around eyes and mouth. To solve the problem, a large number of methods have been proposed and the texture update method is one of them. In this paper, we investigate texture synthesis for model-based coding. In the update process of the proposed texture synthesis algorithm, texture information is stored in a memory and the decoder reuses it. With this method, the transmission bit rate for texture data can be reduced compared with the conventional method updating texture periodically.

• Investigative Magnetic Resonance Imaging
• /
• 제25권2호
• /
• pp.93-100
• /
• 2021

Purpose: (1) To evaluate the trabecular pattern at the femoral attachment of the posterior cruciate ligament (PCL) in patients with a PCL injury; (2) to analyze bone microarchitecture by applying gray level co-occurrence matrix (GLCM)-based texture analysis; and (3) to determine if there is a significant relationship between bone microarchitecture and posterior instability. Materials and Methods: The study included 96 patients with PCL tears. Trabecular patterns were evaluated on T2-weighted MRI qualitatively, and were evaluated by GLCM texture analysis quantitatively. The grades of posterior drawer test (PDT) and the degrees of posterior displacement on stress radiographs were recorded. The 96 patients were classified into two groups: acute and chronic injury. And 27 patients with no PCL injury were enrolled for control. Pearson's correlation coefficient and one-way ANOVA with Bonferroni test were conducted for statistical analyses. This protocol was approved by the Institutional Review Board. Results: A thick and anisotropic trabecular bone pattern was apparent in normal or acute injury (n = 57/61;93.4%), but was not prominent in chronic injury and posterior instability (n = 31/35;88.6%). Grades of PDT and degrees of posterior displacement on stress radiograph were not correlated with texture parameters. However, the texture analysis parameters of chronic injury were significantly different from those of acute injury and control groups (P < 0.05). Conclusion: The trabecular pattern and texture analysis parameters are useful in predicting posterior instability in patients with PCL injury. Evaluation of the bone microarchitecture resulting from altered biomechanics could advance the understanding of PCL function and improve the detection of PCL injury.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.313-319
• /
• 1999

The development of deformation texture in FCC polycystalline metals during rolling was simulated by the finite element analysis using a large-deformation, elaatic-plastic, rate-dependent polycrystalline model of crystal plasticity. Different plastic anisotropy due to different orientation of each crystal makes inhomogeneous deformation. Assuming plane strain compression condition, the simulation with a high rate sensitivity resulted in main component change from Dillamore at low rate sensitivity to Brass component.

• 대한가정학회지
• /
• 제23권3호
• /
• pp.49-53
• /
• 1985

The typical texture profile analysis of acorn flour gel was investigated with Instron univ. testing machine by two experimental designs, 3$\times$3 latin square and $3^{3}$factorial experiment. As the result, it was revealed that Latin square is a useful method to reduce the number of experiments, in the case of a negligible interaction.

• 한국멀티미디어학회논문지
• /
• 제19권6호
• /
• pp.979-989
• /
• 2016

Traversable region detection is an essential step for advanced driver assistance systems and self-driving car systems, and it has been conducted by detecting lanes from input images. The performance can be unreliable, however, when the light condition is poor or there exist no lanes on the roads. To solve this problem, this paper proposes an algorithm which utilizes the information about the number of lanes and texture analysis. The proposed algorithm first specifies road region candidates by utilizing the number of lanes information. Among road region candidates, the road region is determined as the region in which texture is homogeneous and texture discontinuities occur around its boundaries. Traversable region is finally detected by dividing the estimated road region with the number of lanes information. This paper combines the proposed algorithm with a lane detection-based method to construct a system, and simulation results show that the system detects traversable region even on the road with poor light conditions or no lanes.

• 한국멀티미디어학회논문지
• /
• 제22권8호
• /
• pp.832-843
• /
• 2019

Prostate cancer is a high-risk with a high incidence and is a disease that occurs only in men. Accurate diagnosis of cancer is necessary as the incidence of cancer patients is increasing. Prostate cancer is also a disease that is difficult to predict progress, so it is necessary to predict in advance through prognosis. Therefore, in this paper, grade classification is attempted based on texture feature extraction. There are two main methods of classification: Uses One-way Analysis of Variance (ANOVA) to determine whether texture features are significant values, compares them with all texture features and then uses only one classification i.e. Benign versus. The second method consisted of more detailed classifications without using ANOVA for better analysis between different grades. Results of both these methods are compared and analyzed through the machine learning models such as Support Vector Machine and K-Nearest Neighbor. The accuracy of Benign versus Grade 4&5 using the second method with the best results was 90.0 percentage.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.2059-2064
• /
• 2004

Texture analysis is an important role for automatic visual insfection. This paper presents an application of wavelet extension and Gray level co-occurrence matrix (GLCM) for detection of defect encountered in textured images. Texture characteristic in low quality images is not to easy task to perform caused by noise, low frequency and small dimension. In order to solve this problem, we have developed a procedure called wavelet image extension. Wavelet extension procedure is used to determine the frequency bands carrying the most information about the texture by decomposing images into multiple frequency bands and to form an image approximation with higher resolution. Thus, wavelet extension procedure offers the ability to robust feature extraction in images. Then the features are extracted from the co-occurrence matrices computed from the sub-bands which performed by partitioning the texture image into sub-window. In the detection part, Mahalanobis distance classifier is used to decide whether the test image is defective or non defective.