• Journal of Ocean Engineering and Technology
• /
• v.7 no.1
• /
• pp.81-91
• /
• 1993

Studies on the flow pattern due to reclamation in the Myunggi-Nocksan region are carried out based on field observations and numerical experiments. Serial time series measurement of current, temperature and salinity were conducted for 1 tidal period at intervals of 1 hour from surface to bottom on station located at 128.deg. 54' 44" E, 35.deg. 01' 04" N in April and June 1992. Surface current opposite to the subsurface current causes turbulent mixing to make homogeneous salinity pattern in vertical section. Reclamation has little effect on the wave pattern and flow patterns are also nearly similar except on the nearby region of reclamation where flow speed somewhat weakened.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1147-1157
• /
• 2009

Recently this country has carried out the coast reclamation centering on the west and south coast for effective practical use of a country, considering purchase of materials and environmental problem, and carrying into effort the reclamation method after dredging the ground in the ocean. In this large scale ocean dredging reclaiming work, prediction the ground subsidence after reclaiming is very important for not only expense lose by overestimation or underestimation but also hereafter the best suited project establishment. this study carries out sedimentation and self weight consolidation in each cases and searches the features to analyze effect on kinds of soil of ground before dredging, abandonment height when it abandons momentary, void ratio, difference of abandonment height when it abandons by stages and difference of particle content of spoil.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.155-161
• /
• 1999

The land reclamation area of Saemangeum(Kunsan) is located between 126$^{\circ}$10' E~126$^{\circ}$50' E and 35$^{\circ}$35' N~356$^{\circ}$05'N at the western coast of the Korean peninsula. The are many small islands including extensive areas of semi-diurnally flooded and dewatered tidal flats. The reclamation area of Saemangeum has a range of 5.6m spring tide and the maximum tidal current speed is about 1.41m s-1 in ordinary spring tide. Most of the sediments deposited on the tidal flats are transported from the Geum river, the Manjyung river and The Dongjin river. The soil in this area consists of silty sand with the depth of 10m to 30m . The wind in winter is strong from the direction of northwest. In the past twenty years, land reclamation projects for agricutural purpose or industrial cocmplex have been mostly implemented along the western coast of Korea. Saemangeum coastal area is being constructed the33km sea dike and 40, 100ha reclamation area. The purpose of this study is to find the residual circulations in four seasons after the dike construction by a robust diagnostic and prognostic numerical model. Heat flux at the sea surface in January ,May , August , October was asopted on the basis on the daily inflow of solar radiation at the earth surface, assuming an average atomospheric transmission and no clouds , as a function of latitude and time of year(George L.P.J.E William, 1990). The discharge from the Geum , the Mankyung and the Dongjin rivers was adopted on the basis of experience formula of river flow in January , May ,August, October (The M. of C.Korea, 1993) . Water temperature and salinity along the open boundaries are obtained from the results of field observation s.

• Journal of Environmental Impact Assessment
• /
• v.15 no.4
• /
• pp.237-247
• /
• 2006

In case of studied area located around the sea, the data measured from the regional meteorological office is highly different from the local weather data because the diffusivity of fugitive dust varies considerably with meteorological conditions. Especially, it is very difficult to predict the amount of fugitive dust accurately as wind speed remains high frequently. In this study, the fluxes of suspended particulates as a function of the friction velocity were applied to consider the effect of wind speed on the amount of fugitive dust generated from the reclamation site. The amount of fugitive dust estimated as mentioned above was simulated by using ISCST3 model. As a result, in case of using only the Fugitive Dust Formula which is usually used in Environment Impact Assessment, the predicted $PM_{10}$ concentrations with points were $43.4{\sim}67.8{\mu}g/m^3$. However, in case of applying to the flux of suspended particulates, the predicted values of $PM_{10}$ with points were $43.3{\sim}69.1{\mu}g/m^3$, $49.5{\sim}90.4{\mu}g/m^3$ and $76.0{\sim}182.6{\mu}g/m^3$ with the wind speeds of 4.4, 5.8 and 7.7m/s, respectively. It could be possible to predict the amount of fugitive dust accurately because these predicted values were similar to the measured values. Consequently, we can establish alternatives for reduction of fugitive dust in this area damaged by fugitive dust which is caused by wind.

• Journal of Korea Water Resources Association
• /
• v.35 no.4 s.129
• /
• pp.425-442
• /
• 2002

The land reclamation area of Saemangeum(Kunsan) is located between $126^{\circ}10'\;E{\sim}126^{\circ}50'\;E\;and\;35^{\circ}35'\;N{\sim}36^{\circ}05'\;N$ at the western coast of the Korean peninsula. The reclamation area of Saemangeum has a range of 5.6m spring tide and the maximum tidal current speed is about $1.41m\;s^{-1}$. In ordinary spring tide. Most of the sediments deposited on the tidal flats are transported from the Geum river, the Mankyung river and the Dongjin river. The soil in this area consists of silty sand with the depth of 10m to 30m. The wind in winter is strong from the direction of northwest. Saemangeum coastal area is being constructed 33km the sea dike and 40,100ha reclamation area. The purpose of this study Is to find the residual circulations in four seasons before and after the dike construction by a robust diagnostic and prognostic numerical model.

• Resources Recycling
• /
• v.22 no.5
• /
• pp.13-19
• /
• 2013

The effect of pH on the citrate leaching behavior of heavy metal ion was investigated to develop an eco-friendly process for removing heavy metals from soil contaminated with copper, zinc, and lead. The leaching tests were performed using citrate solution with pH adjusted by mixing citric acid and sodium citrate under the following leaching conditions: particle size, under $75{\mu}m$; temperature, $50^{\circ}C$; citrate concentration, $1kmol/m^3$; pulp density, 5%; shaking speed, 100 rpm; leaching time, 1 hour. The difference of pH before and after the leaching test was not observed, and this result indicates the direct effect of hydrogen ion concentration on the leaching of metals was insignificant. The removal ratios of copper, zinc, and lead from the contaminated soil decreased with increasing pH. The thermodynamic calculation suggests that the leaching behaviors of metal ions were determined by two reactions; one is the reaction to form complex ions between heavy metal ions and citrate ion species, and the other is the reaction to form metal hydroxide between heavy metal ions and hydroxide ion.

• Journal of Biosystems Engineering
• /
• v.21 no.3
• /
• pp.343-356
• /
• 1996

The plot geometry of the paddy land is directly related to the performance of machines, especially those having a large size and high speed. The study was to investigate the optimum plot geometry from the standpoint of mechanization. A simulator, Field-Plot-Structure-Evaluation-System(FPSES) was developed for evaluation of the field performance of machines according to the plot geometry. The efficiency and capacity of different sizes of machinery used for rice farming functions were analyzed for a various combination of plot geometry, which could be used as reference for the land reclamation planning and mechanization programming. It is shown that the plot size of about two hectares having a length of 200m and width of loom may be optimum, considering the efficiency and capacity of large sized machinery available currently and in near future.

• Journal of the Semiconductor & Display Technology
• /
• v.2 no.1
• /
• pp.15-19
• /
• 2003

Spin etcher can process frontside and backside on the wafer, which is used for etching, stripping, cleaning and wafer reclamation. A new generation of spin etchers has been designed to meet 300mm wafer processing. The larger header and higher spin speed make vibration problem a severe problem in developing equipments. This study shows schematic process of solving practical vibration problems, where it is required to analyze the principal ca uses of vibration problem and find out the method of vibration reduction in spin etcher. The vibration under normal operation is measured in time domain and is analyzed in frequency domain. And modal parameters are obtained through modal test. Using the modal parameters from experiments, the model of finite element method is formulated. From diagnosis using many measurements and analyses, it can be shown that main cause of vibration is unbalance of head.

• Journal of Environmental Impact Assessment
• /
• v.12 no.4
• /
• pp.291-302
• /
• 2003

This paper examined the impacts of the regional developments and dwellers behavior on the Seacoast. Seacoast features a variety of landforms which are created by the action of waves and tidal flows. The coastal landforms are found mainly in the interface between land and sea. Although erosional landforms constitute prominent landscape features as sea stack, sea arch, and rock cliff do, it is nonetheless the depositional features such as beaches, tidal flats, offshore bars, deltas, sanddunes, and coastal plains that have various ramifications for human communities. Among these, beaches and coastal sanddunes are special in that their formation is attributable to the combined action of waves, tidal flows, and winds. The main line of discussion in this dissertation is concerned with the transformation of group of beaches sanddunes along the coastline of Chungcheong-Namdo Province. To some extent, the erosion of coastal dunes has been a global phenomenon. The degradation process occurs most actively when the spring tides attack beaches, berms, and foredunes. Also involved in the transformation of coastal dunes are factors of human agency. The extent, speed, and pattern of their morphological changes are a function of land-use pattern. The reclamation of swale and the exploitation of sands as construction material and silica sand, for example, ruin the feature of coastal dunes.

• Journal of Navigation and Port Research
• /
• v.30 no.9
• /
• pp.755-762
• /
• 2006

When we consider to develop a new harbor, the most important factor, we think, is the lowest water depth of waterway and approaching channel for safe navigation of vessel. The existing harbors have been being dredged to meet the international trend of jumbo sized vessels by adopting the new design criteria. As the dredged materials over the expected at the design level were common and there are still lack of land based reclamation area, we have no choice to discharge the dredged materials in open sea area In this study, we analysed the behavior of discharged materials at the dumping area of offshore, which were collected from the dredging work at the waterway in Busan New Port. We measured the tidal currents and analyzed the waters of dumping site after the dumping work. These were used to evaluate the numerical models. Suspended Solids(SS) were introduced to the diffusion model. Because of the characteristic of the dumping site, the speed of initial diffusion and settle down of the discharged materials was so fast. Therefore, we believe that the dumped materials do not cause a significant impact to the marine environment.