• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.196-200
• /
• 2005

단일액체추진제 하이드라진 소형로켓엔진의 이론성능해석을 위한 추진제 연소화합물의 화학평형조성 계산모델이 간략히 제시된다. 성능해석결과는 1 lbf급 추력기의 성능평가 시험결과와 암모니아 몰분율의 관점에서 비교, 분석되고, 노즐팽창비와 추진제 주입압력에 따른 화학평형 조성 및 평균분자량 등이 추가로 제시된다. 이론해석은 단일액체추진제 중 대형급 로켓엔진의 설계변수 도출의 일환으로 시도된다.

• Steel and Composite Structures
• /
• 제45권6호
• /
• pp.865-876
• /
• 2022

The slit members have lower strength and lower stiffness, which might lead to lower energy dissipation. In order to improve the seismic performance of the slit members, the paper proposes the shear lead damper, which has stable performance and small deformation energy dissipation capacity. Therefore, the shear lead damper can set in the vertical silts of the slit member to transmit the shear force and improve energy dissipation, which is suitable for the slit member. Initially, the symmetrical teeth-shaped lead damper was tested and analyzed. Then the staggered teeth-shaped lead dampers were developed and analyzed, based on the defect analysis and build improvements of the symmetrical specimen. Based on the parameter analysis, the main influence factors of hysteretic performance are the internal teeth, the steel baffles, and the width and length of damper. Finally, the theoretical analysis was presented on the hysteretic curve. And the skeleton curve and hysteresis path were identified. Based on the above theoretical analysis, the design method was proposed, including the damping force, the hysteresis model and the design recommendations.

• 태양에너지
• /
• 제6권1호
• /
• pp.77-86
• /
• 1986

In this study, theoretical & Experiemental Analysis on three different air type solar collectors (One of metallic material: AI, two of non-metallic materials; GIWA & Slate) are performed. The results of three different collectors show the similiar performance in spite of different absorber material. The results of experiment are coincided with the theoretical results, and thus it is possible to estimate the performance of collector for the other experiment measuring variables. As a result, the thermal conductivity has no influence on the collector efficiency, because air, heat transfer medium, flows through over the whole surface of absorber plate.

• Journal of Power Electronics
• /
• 제6권2호
• /
• pp.121-130
• /
• 2006

This paper presents the performance and efficiency of a drive system incorporating a switched-reluctance motor (SRM) with input power factor correction (PFC). The proposed system consists of a PFC, bi-directional converter, an inverter, and a SRM operating as based voltage source drives (VSD). First, theoretical analysis is made for each identified mode of operation in the drive system. This is followed by comparing the performance of the SRM drive system with and without a PFC circuit. The losses are also calculated for both systems and overall efficiency. Experimental results are presented to prove the theoretical analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1419-1421
• /
• 2005

This paper presents theoretical and practical details about the design, implementation, and performance of a series resonant dc-to-dc converter using planar magnetics. Results of sinusoidal analysis are used to predict the voltage gain and conversion efficiency. The performance of a prototype converter is presented including the efficiency measurement and theoretical loss breakdown.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.253-259
• /
• 1997

A software for design of turbine bearings has been developed based on both the theoretical analysis and experimental investigation. Static and dynamic performance, i.e. load capacity, frictional loss, temperature distribution, stiffness and damping coefficients, stability etc., can be obtained by using this software taking into account the effects of three dimensional variation of lubricant viscosity, turbulence and inlet pressure. A performance test rig was developed by self-design and technology, which was used to verify static and dynamic characteristics and to investigate the proper boundary conditions for theoretical analysis. Consequently HANJUNG has developed the self-design technology for design of turbine bearings for power plants.

• 대한전자공학회논문지TC
• /
• 제43권7호
• /
• pp.84-92
• /
• 2006

서비스거부 공격 또는 분산서비스거부 공격과 같이 단시간 동안 대량의 비정상 트래픽이 발생하였을 경우, 이에 대응하기 위한 기법들에 대해 많은 연구가 진행되었다. 본 논문에서는 비정상 트래픽에 대응하기 위한 대표적인 기법들인 공격차단 기법과 공격경감 기법을 이론적으로 비교한 내용을 보이고자 한다. 공격차단 기법은 일반적으로 필터링 규칙을 기반으로 특정 네트워크로 유입된 네트워크 트래픽에 대해 통과 또는 차단을 실시하는 기법을 의미한다. 그리고 공격경감 기법은 트래픽 전송경로 상에 존재하는 라우터에서 각 라우터들이 가지고 있는 비정상 트래픽 정보를 기반으로 해당 트래픽에 대해 필터링 작업을 실시하거나, 목적지 네트워크의 게이트웨이 상에서 유입된 트래픽의 서비스품질을 제어하는 방법으로 비정상 트래픽에 대해 대응 작업을 실시하는 기법을 의미한다. 비교 기준으로는 공격탐지루틴이 동작한 후, 통과하는 정상 트래픽과 오탐지 트래픽 비율로 하며, 공격경감 기법에 사용할 수 있는 구체적인 트래픽 대역폭 비율을 추가로 보이도록 한다.

• 유통과학연구
• /
• 제14권9호
• /
• pp.121-132
• /
• 2016

Purpose - This study has the following objectives. First, it seeks to build an integrated model that can analyze the path through which headquarters, subsidiary competence, and knowledge transfer performance influence subsidiary performance. Second, it analyzes the influence of the specificity of technology as a moderating effect factor on knowledge transfer process. Third, it will conduct an empirical analysis on distributive manufacturing MNEs and suggests an implication for companies that actually need technological localization. The difference of this study are as follows. First, unlike the existing studies, this study can expand a theoretical discussion as it uses subsidiary performance as the dependent variable. Second, it sets the specificity of technology as a moderating effect factor, not an antecedent, and can draw a theoretical implication. Research design, data, and methodology - This study built a path analysis model to identify the influence of the disseminative capacity and absorptive capacity of distributive manufacturing MNEs on subsidiary performance. Based on the previous studies, it set 19 items as 5 latent variables, and established 6 hypotheses by including the moderating effect of the specificity of technology between them. The final 203 companies were selected as analysis samples through a survey questionnaire. For empirical analysis, the study used PLS (Partial Least Square) that is based on structural equation model. Results - The empirical analysis result demonstrated that both headquarters' disseminative capability and subsidiaries absorptive capacity had a positive influence on knowledge transfer performance. Knowledge transfer performance also had a positive influence on subsidiary performance. In the analysis of moderating effect, the specificity of technology acted as a significant moderating variable only between knowledge transfer performance and subsidiary performance; it did not show a statistically significant moderating effect among disseminative capability, absorptive capacity, and knowledge transfer performance. Conclusions - The empirical analysis results of this study demonstrate the importance of disseminative capability and absorptive capacity in knowledge transfer to subsidiaries from the distributive manufacturing MNEs in Korea. The analysis on the moderating effect indicates that the specificity of technology in Korean companies influences on the process of making achievement by using the transferred knowledge.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권5호
• /
• pp.243-248
• /
• 2001

In this paper, we present theoretical and experimental study on the viscous damping of the on-substrate torsional micromirrors, oscillating near the silicon substrates. In this theoretical study, we develop theoretical models and test structures for the viscous damping of the on-substrate torsional micromirrors. From a finite element analysis, we estimate the theoretical damping coefficients of the torsional micromirrors. From a finite element analysis, we estimate the theoretical damping coefficients of the torsional micromirrors, fabricated by the surface-micromaching process. From the electrostatic test of the fabricated devices, frequency-dependent rotationalvelocity of the micromirrors has been measured at the atmospheric pressure using devices, frequency-dependent rotational velocity of the micromirrors has been measured at the atmospheric pressure using the Mach-Zehnder interferometer system. Experimental damping coefficients have been extracted from the least square fit of the measured rotational velocity within the filter bandwidth of 150 kHz. We have compared the theoretical values and the experimental results on the dynamic performance of the micromirrors. The theoretical analysis overstimates the resonant frequency in the amount of 15%, while underestimating the viscous damping in the factors of 10%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권12호
• /
• pp.3166-3181
• /
• 2012

Localization of mobile station (MS) has now gained considerable attention. Since the hybrid measurements can help to improve the positioning accuracy, several hybrid localization methods have been proposed in the literature. However, the high performance estimator with the closed-form solution and complete performance analysis for time-of-arrival/signal strength (TOA/SS) localization technique is still an opening issue. Two TOA/SS localization algorithms with the closed-form solutions are proposed for the cases with or without uncertainty in the positions of base stations. Furthermore, performance analysis for the TOA/SS localization technique is presented. Both the theoretical variances and Cramer-Rao lower bounds (CRLBs) are derived and the relationship between the cases with or without uncertainty is given. The paper also proves that the TOA/SS scheme has a lower CRLB than the TOA (or SS) scheme. Theoretical analysis and simulations show that the proposed method can reach its CRLB.