• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.539-544
• /
• 2013

$Ag@SiO_2@SiO_2$(FITC) nanocomposites were prepared by the simple polyol process and St$\ddot{o}$ber method. Fluorescence enhancement of fluorescein moiety (fluorescein isothiocyanate, FITC) was investigated in the presence of silver nanoparticles in $Ag@SiO_2@SiO_2$(FITC) system with varying thickness (X nm) of first silica shell. Maximum enhancement factor of 4.3 fold was achieved in $Ag@SiO_2@SiO_2$(FITC) structure with the first silica shell thickness of 8 nm and the average separation distance of 11 nm between the surface of silver nanoparticle and fluorescein moiety. The enhancement is believed to be originated from increased excitation rate of fluorescein moiety due to concentrated local electromagnetic field which was improved by interaction of light with silver nanoparticles.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.23-26
• /
• 2004

Ag/Ni multilayers with different bilayer thickness between 3 and 100 nm produced by DC magnetron puttering have been studied by cross-sectional TEM and nanoindentation. The micrograph shows perfect layered structure with sharp interfaces between Ag and Ni layers. Absolute hardness is calculated as a reference value to compare hardness of specimens regardless of indent depth. A hardness enhancement of nearly $100\%$ over the rule-of-mixtures values, calculated from the measured hardness of single Ag and Ni thin films, is observed. The hardness increases with decreasing bilayer thickness until 8nm. This enhancement shows a good agreement with Hall-Petch relation using grain size (one half of the bilayer thickness) confined within a layer. The deformation behavior can be explained by dislocation pile-up in smaller grains.

• Asian Journal of Atmospheric Environment
• /
• v.3 no.1
• /
• pp.1-8
• /
• 2009

Enhancement of aerosol optical thickness (AOT) and surface aerosol mass concentration in Korea for an active forest fire episode in Northeast Asia were estimated by Community Multi-scale Air Quality (CMAQ) model. MODIS/TERRA remote detects of fires in Northeast Asia for May 2003 gave a constraint for estimation of wildfire emissions with an NDVI distribution for recent five years. The simulated wildfire plumes and enhancement of AOT were evaluated and well resolved by comparing multiple satellite observations such as MODIS, TOMS, and others. Scatter plots of observed daily mean aerosol extinction coefficient versus $PM_{10}$ concentration in ground level in Korea showed distinctively different trends based on the ambient relative humidity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.11
• /
• pp.939-942
• /
• 2007

We investigated the characteristics of UTB-SOI pMOSFETs with SOI thickness($T_{SOI}$) ranging from 10 nm to 1 nm and evaluated the dependence of electrical characteristics on the silicon surface orientation. As a result, it is found that the subthreshold characteristics of (100)-surface UTB-SOI pMOSFETs were superior to (110)-surface. However, the hole mobility of (110)-surface were larger than that of (100)-surface. Especially, the enhancement of effective hole mobility at the effective field of 0.1 MV/cm was observed from 3-nm to 5-nm SOI thickness range.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.1
• /
• pp.17-24
• /
• 2001

A model for quantifying the effect of steam pressure on the oxide thickness growth was developed based on the experimental data available. First, empirical equations for the thickness estimation of oxide formed in 1 atm steam were made. The oxide growth kinetics turned out to be dependent on 0.4th power of oxidation time. With an assumption that the transition oxide thickness be only a function of temperature, a model for the enhancement of steam pressure on oxide growth was developed. The enhancement coefficient for steam pressure is calculated to be 0.01~0.013 $bar^{-}$. The developed model generally well explains the experimental data.a.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.185-191
• /
• 2000

Direct ＆ adaptive slicing of sculptured surfaces in RP improves, quality ＆ accuracy of the final product, compared to the slicing with uniform layer thickness or the slicing of facets (ie, STL). Present D＆A slicing procedures adaptively compute the next layer thickness based on the surface information of current sliced contour, which assumes constant normal curvature values. In some cases, however. such assumption leads to intolerable slicing result which cannot correctly consider the entire local feature shape. We propose improved adaptive slicing algorithms which can determine near-optimal layer thickness, including illustrated examples.

• Clinical and Experimental Reproductive Medicine
• /
• v.25 no.2
• /
• pp.153-160
• /
• 1998

The objective of this retrospective study was to evaluate whether the transvaginal ultrasonographic analysis of endometrial pattern and thickness could predict the stage of menstrual cycle. Endometrial pattern and thickness were observed in those patients receiving infertility work up from April, 1994 to July, 1998 at Seoul National University Hospital. The study group was 185 patients with normal regular menstrual cycles. Among them, 44 patients received endometrial biopsy, and the date of endometrium was compared with the observed endometrial pattern and thickness. The observed endometrial pattern was presence or absence of central cavity echogenicity, triple line sign, endometrial hypoechogenicity, ring sign, endometrial hyperechogenicity and posterior acoustic sonic enhancement. The results were as follows; Central cavity echogenicity was seen throughout menstrual cycle. Triple line sign was observed in 81.1% of patients during early secretory phase. However, in mid to late secretory phase, triple line sign was appeared in only 6.8%. The percentage of positive endometrial hypoechogenicity was highest in early secretory phase. In contrast to hypoechogenicity, positive endometrial hyperechogenicty was highest in mid to late secretory phase. Ring sign was observed in 73.5% of the patients during early secretory phase with peak incidence. Posterior acoustic enhancement was seen in 72.7% of the patients during late secretory phase. The sensitivity and specificity of being a secretory phase if the patients showed hyperechogenic endometrium, were 84.2%, 83.3% respectively. The sensitivity and specificity of being a secretory phase if the patients showed posterior acoustic enhancement were 93.8%, 58.3% respectively. Endometrial thickness was not correlated with endometrial dating. In conclusion, transvaginal ultrasonographical delineation of the endometrial pattern might be useful tool in predicting endometrial status during normal menstrual cycle. But, endometrial thickness could not predict the endometrial dating.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.4
• /
• pp.1-5
• /
• 2015

In this work, a study was conducted to investigate the effect of diaphragm thickness on the regression rate of the hybrid rocket motor. To observe the flow pattern and the recirculation zone, visualizations of combustion chambers with different diaphragm thickness (5mm, 10mm) were performed. It was found that the case with 5 mm thickness had a larger recirculation zone and therefore, had a higher regression rate than the case with 10mm thickness due to the increased residence time and heat transfer toward the fuel surface. Finally, it was concluded that the thickness of diaphragm can be a critical parameter for the enhancement of the regression rate.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.5
• /
• pp.250-252
• /
• 2017

High-performance full swing logic inverters were fabricated using amorphous 1 wt% Si doped indium-zinc-oxide (a-SIZO) thin films with different channel layer thicknesses. In the inverter configuration, the threshold voltage was adjusted by varying the thickness of the channel layer. The depletion mode (D-mode) device used a TFT with a channel layer thickness of 60 nm as it exhibited the most negative threshold voltage (-1.67 V). Inverters using enhancement mode (E-mode) devices were fabricated using TFTs with channel layer thicknesses of 20 or 40 nm with excellent subthreshold slope (S.S). Both the inverters exhibited high voltage gain values of 30.74 and 28.56, respectively at $V_{DD}=15V$. It was confirmed that the voltage gain can be improved by increasing the S.S value.

• Journal of Magnetics
• /
• v.14 no.1
• /
• pp.31-35
• /
• 2009

Herein, the Magneto-Optical Kerr Effect (MOKE) signal enhancement in nanostructures in investigated. It is well known that the MOKE signals of ferromagnetic thin films are enhanced with an additional dielectric layer due to multiple reflections. The MOKE signal is modulated with the additional dielectric layer thickness and is at a maximum when reflectivity is at a minimum. This is not always true in the nanostructures due to the contribution from the non-magnetic substrate portion, especially when substrate reflectivity is minimized and the dependence of the additional dielectric layer thickness for the nanostructure is changed in the case of the continuous thin film. We showed that the MOKE signal for nanostructures could be enhanced with a properly designed, dielectric layer in addition to the anti-reflection coated substrates.