• 제목/요약/키워드: through-thickness hole

검색결과 86건 처리시간 0.023초

윤환관개의 방법의 차이가 수도생육 및 수량에 미치는 영향과 그 적정시설에 관한 연구 (Studies on the Effects of Variation Methods of Rotation Irrigation Systems Affecting on the Growth, Yield of Rice Plant and its Optimum Facilities)

  • 이창구
    • 기술사
    • /
    • 제2권5호
    • /
    • pp.4-18
    • /
    • 1969
  • This experiment was conducted, making use of the "NONG-RlM 6", a recommended variety of rice for year of 1968. Main purposes of the experiment are to explore possibilities of: a) ways and means of saving irrigation water and, b) overcoming drought at the same time so that an increased yield in rice could be resulted in. Specifically, it was tried to determine the effects of the circulation irrigation method combined with differentiated thickness of lining upon the growth and yield of rice. Some of the major findings are summarized in the following. 1) The different thicknesses show a significant relationship with the weight of 1,000 grains. In the case of 9cm-lined plot, the grain weight is 23.5 grams, the heaviest. Next in order are 3cm-lined plot, 6cm-lined plot, control plot, and wheat straw lined-plot. 2) In rice yield, it is found that there is a considerably moderate significant relationship with both the different thickness of lining and the number of irrigation, as shown in the table. 3) There is little or no difference among different plots in terms of a) physical and chemical properties of solid, b) quality of irrigation water, c) climatic conditions, and rainfalls. 4) It is found that there is a significant relationship between differences in the method of rotation irrigation and the number of ears per hill. The plot irrigated at an interval of 7 days shows 17.4 ears and the plot irrigated at an interval of 6 days, 16.3. 5) In vinyl-treated plots, it is shown that both yield and component element are greatest in the case of the plot with hole of 3$cm/m^2$. Next in order are; the plot with a hole of 2$cm/m^2$; the plot with a hole of 1$cm/m^2$. In the case of the plot with no hole, it is found that both yield and component elements are decreased as compared to the control plot. 6) The irrigation water requirement is measured for the actual irrigation days of 72 which are the number subtracted the days of rainfall of 30 from the total irrigation days of 102. It is found that the irrigation water requirement for the un control plot is 1,590 mm, as compared to 876 mm (44.9% saved) for the 9cm-lined plot, 959mm(39.7% saved) for the 6cm-lined plot, 1,010mm (36% saved) for the 3cm-lined plot, and 1,082mm (32% saved) for the wheat straw lined plot. In the case of the rotation irrigation method, it is found that the water requirement for the plot irrigated at an interval of 8 days is 538mm (65.3% saved), as compared to 617mm (61.1% saved) for the plot irrigated at an interval of 7 days, 672mm (57.7% saved) for the plot irrigated at an interval of 6 days, 746mm (53.0% saved) for the plot irrigated at an interval of 5 days, 890mm (44.0% saved) for to plot irrigated at an interval of 4 days, and 975mm (38.6% saved) for the plot irrigated at an interval of 3 days. 7) The rate of evapo-transpiration is found 2.8 around the end of the month of July, as compared to 2.6 at the begining of August, 3.4 around the end of August, and 2.6 at the begining of September. 8) It is found that the saturaton quantity of 30 mm per day is decreased to 20mm per day through the use of vinyl covering. 9) The husking rate shows 75 per cent which is considered better.

  • PDF

Bacillus spp. 엽면살포에 의한 가로수 및 고추의 병 방제 (Disease Management in Road Trees and Pepper Plants by Foliar Application of Bacillus spp.)

  • 정준휘;류충민
    • 식물병연구
    • /
    • 제22권2호
    • /
    • pp.81-93
    • /
    • 2016
  • 식물생장촉진세균은 식물의 생장과 수확량을 촉진하고, 식물병에 대한 유도저항성을 유도하는 것으로 보고되었다. 본 논문에서 연구의 목적은 가로수와 고추의 엽면에 엽권정착 식물생장촉진세균을 처리하여, 식물생장촉진세균의 적용 범위를 확장하였다. 수목의 엽권에서 내생포자 형성 세균 1,056개 균주를 분리하여, protease, chitinase, lipase를 포함한 효소활성과 진균병인 C. graminicola와 B. cinerea에 대한 길항작용을 측정하였다. 1차 선발된 bacilli 14개 균주를 고추의 잎에 살포하여 엽권정착능을 시험하였다. 5B6, 8D4, 8G12 단독처리와 그 혼합처리군을 고추 엽면에 살포하여 생장촉진, 수확량증진, 병방제 효과를 고추 포장에서 관찰하였다. 대량배양을 통하여 선발된 균주를 대한민국 대전광역시 유성구 일대의 가로수에 살포하였을 때, 대조군과 비교하여 엽록소함량과 잎 두께가 증가하였다. 선발된 3개 균주를 수목에 엽면살포했을 때, 벚나무 진균성갈색무늬구멍병을 저해하였고 은행나무의 낙엽생성을 촉진하였다. 종합적으로 본 연구는 엽권정착세균의 엽면살포를 통하여 가로수와 고추의 생장을 촉진시키고, 식물병을 방제하는 엽권정착세균의 적용 가능성을 제시한다.

기체전자증폭기를 이용한 X-선 영상획득실험에 관한 연구 (A Study for The X-ray Image Acquisition Experiment Using by Gas Electron Multipliers)

  • 강상묵;한상효;조효성;남상희
    • 대한의용생체공학회:의공학회지
    • /
    • 제24권2호
    • /
    • pp.83-89
    • /
    • 2003
  • 기체전자증폭기는 기존의 기체검출기의 표류공간에 위치하여 표류전기장을 매우 짧은 거리에 걸쳐 전자사태가 가능한 세기(〉 $10^4$ V/cm) 이상으로 압축함으로써 기체이득을 향상시키는 개념적으로 간단한 기구이다 이 기구는 양면이 금속(구리)으로 얇게 코팅된 수십 $\mu\textrm{m}$ 두께의 절연성 foil에 화학적 에칭이나 고출력 레이저빔 천공방법을 이용하여 직경 100 $\mu\textrm{m}$ 이하의 미소 hole들을 100-200 $\mu\textrm{m}$ 간격으로 균일하게 뚫어 놓은 구조로 되어 있다. 본 연구에서는 다양한 실험조건에서 기체전자증폭기의 동작특성을 조사하였으며 또한 기체전자증폭기의 섬광특성을 이용하여 표준 CCD 카메라와 결합하여 X-선 영상을 획득함으로써 디지털 X-선 영상센서로서의 가능성을 제시하였다.

LP가스 용기의 부식 및 가스누출 원인 분석 (Analysis for Cause of Corrosion and Gas Leakage on LP-Gas Cylinder)

  • 최송천;조영도;권정락;김지윤
    • 한국가스학회지
    • /
    • 제5권1호
    • /
    • pp.52-59
    • /
    • 2001
  • LP가스 용접 용기의 가스 누출사고에 대한 통계적 분석을 통하여 사고 발생에 영향을 미치는 주된 요인을 조사하였다. 그 결과 대부분의 가스 누출은 용접부 국부부식에 따른 핀홀에 의한 누출이 가장 큰 비중을 차지하고 있다. 따라서, 본 논문에서는 2부구조 용기에서의 열처리조건의 문제점과 3부구조 용기의 T부위 터짐 현상에 의한 대책안을 제시하였다. 나아가, LP 가스 용기의 용접부 및 모재부에 대하여 산성비와 해수 분위기에서의 부식속도를 전기화학적 부식실험을 통하여 측정하였다. 또한, LP가스 용기의 제조공정중 분체도장 공정에 의한 도장막의 부착성 및 결함을 주사전자현미경을 통하여 분석하고 최적의 도장 두께를 제시하였다.

  • PDF

볼트 전단파단이 지배하는 지압형식 볼트접합부의 힘-변형 관계 (Force-Deformation Relationship of Bearing-Type Bolted Connections Governed by Bolt Shear Rupture)

  • 김대경;이철호;진승표;윤성환
    • 한국강구조학회 논문집
    • /
    • 제27권1호
    • /
    • pp.1-12
    • /
    • 2015
  • 잘 접합된 볼트접합부는 볼트의 전단파단이 발생할 때 까지 지압 메커니즘에 의하여 훌륭한 연성거동을 보인다. 이러한 볼트접합부에 내재된 연성 능력을 최대한 활용한다면 중력하중, 풍하중, 지진하중 등 다양한 하중에 대하여 활용하여 접합비용의 경제성 제고에 기여할 수 있다. 편심하중을 받는 볼트접합부의 경우 보수적인 탄성해석법과 합리적으로 볼트접합부의 연성거동을 활용할 수 있는 극한강도 해석법이 존재하나 기존의 극한강도해석법은 오늘날 다양한 소재와 설계조건의 다양화에도 불구하고 하나의 소재와 조건으로 이루어진 실험식에 의존하고 있다. 본 연구의 주된 목적은 체계화된 단일볼트의 실험을 기반으로 볼트의 일반화된 힘-변형 관계식을 정립하는 것이다. 실험결과를 토대로 볼트접합부의 기하학적인 요소(볼트의 직경, 플레이트의 두께) 및 강도가 힘-변형 관계에 주된 영향을 미치는 요소라는 것을 알 수 있다. 실험결과를 순간중심회전법에 적용하여 보다 정확하고 경제적인 편심하중을 받는 군볼트 접합부 설계가 가능하다.

토목 공학에서의 SASW 기법의 활용 (Applications of SASW Method to Civil Engineering)

  • 송명준;정연문;이영남
    • 지구물리와물리탐사
    • /
    • 제2권4호
    • /
    • pp.174-179
    • /
    • 1999
  • 토목구조물의 내진설계등에 필요한 탄성 계수중의 하나인 S파 속도의 측정을 위해서 통상적으로 시추공을 이용한 downhole 시험이나 crosshole 시험 또는 검층 조사를 실시하여 왔다. SASW(Spectral Analysis of Surface Waves, 주파수영역 표면파해석)기법은 이러한 공내 시험법들의 한계를 극복한 것으로서 지표면에서 표면파의 측정을 통해 지표 아래의 전단 강성 주상도를 추정하는 비파괴, 비관입 시험방법이다. 본 논문에서는 SASW기법의 원리를 간략히 언급하고 현장적용 가능성 파악을 위하여 여러 현장에서 수행한 SASW실험 결과를 요약하였다. 인천국제공항 현장에서의 동다짐 효과 판정, 마북리 시험터널의 라이닝 및 배면 암반 상태 파악, 콘크리트 옹벽의 두께 파악을 위하여 SASW기법을 성공적으로 활용하였으며 비파괴적, 경제적인 특징으로 인하여 그 외 다양한 분야에서도 SASW기법이 응용될 수 있는 가능성을 제시하였다.

  • PDF

Chemical Vapor Deposition 공정으로 제작한 CuI p-type 박막 트랜지스터 (p-type CuI Thin-Film Transistors through Chemical Vapor Deposition Process)

  • 이승민;장성철;박지민;윤순길;김현석
    • 한국재료학회지
    • /
    • 제33권11호
    • /
    • pp.491-496
    • /
    • 2023
  • As the demand for p-type semiconductors increases, much effort is being put into developing new p-type materials. This demand has led to the development of novel new p-type semiconductors that go beyond existing p-type semiconductors. Copper iodide (CuI) has recently received much attention due to its wide band gap, excellent optical and electrical properties, and low temperature synthesis. However, there are limits to its use as a semiconductor material for thin film transistor devices due to the uncontrolled generation of copper vacancies and excessive hole doping. In this work, p-type CuI semiconductors were fabricated using the chemical vapor deposition (CVD) process for thin-film transistor (TFT) applications. The vacuum process has advantages over conventional solution processes, including conformal coating, large area uniformity, easy thickness control and so on. CuI thin films were fabricated at various deposition temperatures from 150 to 250 ℃ The surface roughness root mean square (RMS) value, which is related to carrier transport, decreases with increasing deposition temperature. Hall effect measurements showed that all fabricated CuI films had p-type behavior and that the Hall mobility decreased with increasing deposition temperature. The CuI TFTs showed no clear on/off because of the high concentration of carriers. By adopting a Zn capping layer, carrier concentrations decreased, leading to clear on and off behavior. Finally, stability tests of the PBS and NBS showed a threshold voltage shift within ±1 V.

실험 및 수치해석을 이용한 SLP (Substrate Like PCB) 기술에서의 마이크로 비아 신뢰성 연구 (Experimental and Numerical Analysis of Microvia Reliability for SLP (Substrate Like PCB))

  • 조영민;좌성훈
    • 마이크로전자및패키징학회지
    • /
    • 제27권1호
    • /
    • pp.45-54
    • /
    • 2020
  • 최근 PCB의 소형화, 박형화 및 고밀도화가 크게 요구되면서 MSAP (Modified Semi Additive Process) 기술을 이용한 SLP (Substrate Like PCB) 기술이 큰 주목을 받고 있다. 특히 SLP 기술은 스마트폰의 고용량 배터리 개발과 5G 기술에 꼭 필요한 기술이다. 본 연구에서는 기존의 HDI 기술과 MSAP 기술을 혼합하여 제작한 하이브리드 방식의 SLP의 신뢰성을 실험과 수치해석을 이용하여 분석하였다. 특히 최적의 SLP 설계를 위하여 프리프레그(prepreg)의 물성, 두께, 층수, 마이크로비아(microvia)의 크기 및 misalignment가 마이크로비아의 신뢰성에 미치는 영향을 IST(Interconnect Stress Test) 시험을 이용한 열사이클링 신뢰성 실험과 유한요소 수치해석을 통하여 고찰하였다. SLP 소재인 프리프레그의 열팽창계수가 적을수록 마이크로비아의 신뢰성은 크게 증가하며, 프리프레그의 두께가 얇을수록 신뢰성이 증가된다. 마이크로비아 홀의 크기 및 패드의 크기가 증가하면 응력이 완화되어 신뢰성은 향상된다. 반면 프리프레그의 층수가 증가할수록 마이크로비아의 신뢰성은 감소된다. 또한 misalignment가 크면 신뢰성은 감소하였다. 특히 이들 인자들 중에서 프리프레그의 열팽창계수가 마이크로비아의 신뢰성에 가장 큰 영향을 미친다. 수치 응력해석 결과도 실험 결과와 잘 일치하였으며, 응력이 낮을수록 마이크로비아의 신뢰성은 증가하였다. 본 실험과 수치해석의 결과는 향후 SLP 기판 제작 및 신뢰성 향상을 위한 유용한 설계 가이드라인으로 활용될 것으로 판단된다.

격강구(隔薑灸)의 연소(燃燒) 특성(特性)에 관한 실험적(實驗的) 연구(硏究) (Experimental Study on the Characteristics of Combustion in the Indirect Moxibustion with Ginger)

  • 이건목;이건휘;문성재;황병천;국우석;장지연;김양중;장재호;윤주영
    • Journal of Acupuncture Research
    • /
    • 제21권3호
    • /
    • pp.193-214
    • /
    • 2004
  • Objective : The purpose of this study is to investigate the mechanism and effect of moxibustion with ginger objectively, to be used as the quantitative data through the measurement of temperature, and to grasp the thermodynamic characteristics of moxibustion with ginger. Methods : We have selected the indirect moxibustion with ginger among many indirect moxibustions. We produced a slice of ginger to a thickness of 3, 4, 5mm and the moxa cone having a diameter of 8mm, a height of 10mm for making a comparative study of characteristics of moxa cone according to change the density. We have made a comparative study of the thermodynamic characteristics of moxibustion with ginger with or without holes. We measured combustion times and calculated temperatures, temperature gradients in each period during a combustion of moxa. Results : 1. We found out it was not significantly influenced by the existence of the punched holes in a slice of ginger because the punched holes grow smaller immediately. 2. The duration of the preheating period became longer according to thickness of a slice of ginger and was not directly proportional to the density of moxa cone. The duration of the preheating period was extremely short when it burned a 100mg moxa cone. That was influenced by the density of moxa cone. 3. The duration of the heating period became longer according to thickness of a slice of ginger likewise the preheating period bacause the density of moxa cone had effected on the combustion characteristics. The duration of the heating period was extremely long when it burned a 100mg moxa cone. On the other hand the maximum temperature in the heating period was appeared that the combustion with a thin slice of ginger was highest and measured that the large density of moxa cone was higher. But the maximum temperature in the heating period was about $37.8^{\circ}C{\sim}44.2^{\circ}C$respectively lower in others. 4. The duration of the retaining period was some doubling shorter than that of the heating period that is concerned the shape of moxa cone. The temperature measured the close of a retaining period was $36.6^{\circ}C{\sim}41.8^{\circ}C$, that was considerably lower temperature. 5. The mean ascending temperature velocity and the mean descending temperature velocity were $0.042{\sim}0.073^{\circ}C/sec$, $-0.027{\sim}-0.064^{\circ}C/sec$ respectively. Then, the ascending temperature velocity was some faster than the ascending temperature velocity. Conclusions : The quantitative standard for obtaining the effective heating stimulation is that if the slice of ginger made a hole in it, we had to use the needle above 1.5mm diameter. The recommended size of a slice ginger is the 14mm diameter and the 2~3mm thickness. The moxa cone is formed the conical shape that the base diameter was 8mm, the height was 10mm, the density was $600mg/cm^2$.

  • PDF

Enhanced Light Harvesting by Fast Charge Collection Using the ITO Nanowire Arrays in Solid State Dye-sensitized Solar Cells

  • Han, Gill Sang;Yu, Jin Sun;Jung, Hyun Suk
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.463-463
    • /
    • 2014
  • Dye-sensitized solar cells (DSSCs) have generated a strong interest in the development of solid-state devices owing to their low cost and simple preparation procedures. Effort has been devoted to the study of electrolytes that allow light-to-electrical power conversion for DSSC applications. Several attempts have been made to substitute the liquid electrolyte in the original solar cells by using (2,2',7,7'-tetrakis (N,N-di-p-methoxyphenylamine)-9-9'-spirobi-fluorene (spiro-OMeTAD) that act as hole conductor [1]. Although efficiencies above 3% have been reached by several groups, here the major challenging is limited photoelectrode thickness ($2{\mu}m$), which is very low due to electron diffusion length (Ln) for spiro-OMeTAD ($4.4{\mu}m$) [2]. In principle, the $TiO_2$ layer can be thicker than had been thought previously. This has important implications for the design of high-efficiency solid-state DSSCs. In the present study, we have fabricated 3-D Transparent Conducting Oxide (TCO) by growing tin-doped indium oxide (ITO) nanowire (NWs) arrays via a vapor transport method [3] and mesoporous $TiO_2$ nanoparticle (NP)-based photoelectrodes were prepared using doctor blade method. Finally optimized light-harvesting solid-state DSSCs is made using 3-D TCO where electron life time is controlled the recombination rate through fast charge collection and also ITO NWs length can be controlled in the range of over $2{\mu}m$ and has been characterized using field emission scanning electron microscopy (FE-SEM). Structural analyses by high-resolution transmission electron microscopy (HRTEM) and X-Ray diffraction (XRD) results reveal that the ITO NWs formed single crystal oriented [100] direction. Also to compare the charge collection properties of conventional NPs based solid-state DSSCs with ITO NWs based solid-state DSSCs, we have studied intensity modulated photovoltage spectroscopy (IMVS), intensity modulated photocurrent spectroscopy (IMPS) and transient open circuit voltages. As a result, above $4{\mu}m$ thick ITO NWs based photoelectrodes with Z907 dye shown the best performing device, exhibiting a short-circuit current density of 7.21 mA cm-2 under simulated solar emission of 100 mW cm-2 associated with an overall power conversion efficiency of 2.80 %. Finally, we achieved the efficiency of 7.5% by applying a CH3NH3PbI3 perovskite sensitizer.

  • PDF