• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.84-95
• /
• 2005

This paper presents solution heuristics to solving optimal multiple-viewpoint location problems that are based on topographic features. The visibility problem is to maximise the viewshed area for a set of viewpoints on digital elevation models (DEM). For this analysis, five areas are selected, and fundamental topographic features (peak, pass, and pit) are extracted from the DEMs of the study areas. To solve the visibility problem, at first, solution approaches based on the characteristics of the topographic features are explored, and then, a benchmark test is undertaken that solution performances of the solution methods, such as computing times, and visible area sizes, are compared with the performances of traditional spatial heuristics. The feasibility of the solution methods, then, are discussed with the benchmark test results. From the analysis, this paper can conclude that fundamental topographic features based solution methods suggest a new sight of visibility analysis approach which did not discuss in traditional algorithmic approaches. Finally, further research avenues are suggested such as exploring more sophisticated selection process of topographic features related to visibility analysis, exploiting systematic methods to extract topographic features, and robust spatial analytical techniques and optimization techniques that enable to use the topographic features effectively.

• Journal of The Geomorphological Association of Korea
• /
• v.17 no.1
• /
• pp.73-84
• /
• 2010

This paper is to analyze effectiveness and efficiency of topographic features in visibility analysis. For this research aim, this paper compares the analysis results of topographic features and relationships between topographic features and their visibility analysis on surfaces. This paper employs peak, pass, pit, ridge and valley features from the topographic features for which five areas including mountain and plain areas in Britain are selected and their DEM data are generated. The summaries of the analysis results are as follows: Firstly, it is clear that relationship between high elevation points and their visibility is not highly correlated. This means that highly elevated points are not necessarily better visible areas and they are not suitable for searching for large visible areas. Secondly, the positions that can see large visible areas are highly correlated with their elevation and are distributed within a certain range which has small deviation of their correlation between visibility and elevation. This means that to search for large visible areas, it is necessary to employ the positions located at relatively high elevation area. Thirdly, for all of the five areas, the visibility results of the topographic features are compared with maximal visibility resulted from a while surface areas, and it is identified that topographic features show similar visibility performances of that maximal visibility. From the results stated above, it can be inferred that topographic features and its topographic characteristics are enable to be a research motivation to the visibility analysis topics. Furthermore, the results of this paper can be contributed to explore suitable variables and factors for solving multiple viewshed problems.

• Spatial Information Research
• /
• v.7 no.1
• /
• pp.119-131
• /
• 1999

Various digital topographic maps including 1:1,000 and 1:5,000 have been produced for years and these digital maps are expected to serve a wide range of purposes. Most previous research about measuring positional accuracy for digital topographic maps depends int a method that acquires sample points from the tested map and compares to the corresponding known true locations using some statistics. Recently, a simple method for measuring positional accuracy for linear features is introduced but it has substantial problems applying to the spatial features such as roads, railroads, streams represented with double lines on the recently produced 1:1,000 and 1:5,000 digital topographic maps. This study develops and implements an effective method that measures road objects represented in the 1:5,000 digital topographic maps using a conventional GIS software. We also apply this method to a small study area located in Kangnam Gu, Seoul and illustrate the usefulness of this method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.1-11
• /
• 2002

This study set up a purpose in the efficient utilization of security target objects. This purpose is the following: Firstly, this study analyzed problem about deleted areas for security described on aerial photography image. Secondly, this study made clustering and labeling to recognize censored areas of image. Finally, this study tried to maximize various utilizability of digital image data through postprocessing algorithm. Based on these courses, the results of this study appeared that brightness value of image increased depending on topography and quantities of topographic features. It was estimated that these was able to utilized by useful estimative data in judging information of topography and topographic features included in the total image. Besides, in the image recognition and postprocessing, the better result value was not elicited than in a mountainous region. Because it was included that a lots of topography and topographic features was similarly recognized with the process for deletion of the existing security target objects in urban and suburb region. This result appeared that the topography and quantities of topographic features absolutely affected the recognition and processing of image.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.181-183
• /
• 2006

Digital topographic map in Korea contains layers of spatial and attribute data for 8 land features such as railroads, watercourses, roads, buildings and etc. Some of the layers such as building and forest don't include any information about height, which can be just prepared by interpretation of remote sensed data or field survey. LiDAR(Light Detection And Ranging) data using active pulse and digital camera provides data about height and form of land features. LiDAR data can be used not only to extract the outline of land features but also to estimate the height. This study presents technical availability for extraction and estimation of land feature's outline and height using LiDAR data which composes of natural and artificial land features, and digital aerial photograph which was taken simultaneously with the LiDAR. The estimated location, outline and height of land features were compared with the field survey data, and we could find that LiDAR data and digital aerial photograph can be a useful source for estimating the height of land features as well as extracting the outline.

• Korean Journal of Agricultural Science
• /
• v.45 no.4
• /
• pp.749-760
• /
• 2018

In Korea, the largest agricultural lands are paddy fields which have poor infiltration and drainage properties. Recently, the Korean government has pursued cultivating upland crops in paddy fields to reduce overproduced rice in Korea. For this policy to succeed, it is critical to understand the topographic information of paddy fields and its effects on upland crops cultivated in the soils of paddy fields. The objective of this study was to characterize the growth properties of sesame and perilla from paddy fields with three soil topographic features and soil water effects which were induced by the topographic features of the sesame and perilla. The crops were planted in paddy fields located in Miryang, Gyeongnam with different topographies: mountain foot slope, local valley and alluvial plain. Soil water contents and groundwater levels were measured every hour during the growing season. The paddy field of the mountain foot slope was significantly effective in alleviating wet injury for the sesame and perilla in the paddy fields. The paddy field of the mountain foot slope had a decreased average soil water content and groundwater level during cultivation. Stress day index (SDI) from the alluvial plain paddy field had the greatest values from both crops and the smallest from the ones from the paddy field of the mountain foot slope. This result means that sesame and perilla had the smallest stress from the soil water content of the paddy field on the mountain foot slope and the greatest stress from the soil water content of the alluvial plain. It is important to consider the topography of paddy fields to reduce wet injury and to increase crop yields.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.295-301
• /
• 2004

Satellite captures images periodically and economically over the area wider than aerial photographs, and reconnaissance to unapproachable area. For these advantages, mapping using high resolution satellite image has high potentials of marketability and development. Therefore, utilization of satellite image in mapping and GIS is expected to be growing and research on describable feature, positional accuracy and, possible mapping scale is urgently needed. This research presented that Quick Bird orthoimage could be used to update digital map on a scale of 1:5,000. Quick Bird image was corrected geometrically based on ground control points. DEM was generated using height data of digital topographic map. The orthoimge was produced by digital differential rectification based on DEM which was generated using height data of digital topographic map(scale 1;5,000 and 1;1,000). When the digital topographic map was overlaid with the orthoimage, it was very easy to find changed region or new features builded after the map compiled.

• Wind and Structures
• /
• v.10 no.5
• /
• pp.437-462
• /
• 2007

A non-translating, long duration thunderstorm downburst has been simulated experimentally and numerically by modelling a spatially stationary steady flow impinging air jet. Velocity profiles were shown to compare well with an upper-bound of velocity measurements reported for full-scale microbursts. Velocity speed-up over a range of topographic features in simulated downburst flow was also tested with comparisons made to previous work in a similar flow, and also boundary layer wind tunnel experiments. It was found that the amplification measured above the crest of topographic features in simulated downburst flow was up to 35% less than that observed in boundary layer flow for all shapes tested. From the computational standpoint we conclude that the Shear Stress Transport (SST) model performs the best from amongst a range of eddy-viscosity and second moment closures tested for modelling the impinging jet flow.

• Journal of Korean Society on Water Environment
• /
• v.24 no.4
• /
• pp.488-498
• /
• 2008

Soil and Water Assessment Tool (SWAT) model have been widely used in simulating hydrology and water quality analysis at watershed scale. The SWAT model extracts topographic feature using the Digital Elevation Model (DEM) for hydrology and pollutant generation and transportation within watershed. Use of various DEM cell size in the SWAT leads to different results in extracting topographic feature for each subwatershed. So, it is recommended that model users use very detailed spatial resolution DEM for accurate hydrology analysis and water quality simulation. However, use of high resolution DEM is sometimes difficult to obtain and not efficient because of computer processing capacity and model execution time. Thus, the SWAT Topographic Feature Extraction Error (STOPFEE) Fix module, which can extract topographic feature of high resolution DEM from low resolution and updates SWAT topographic feature automatically, was developed and evaluated in this study. The analysis of average slope vs. DEM cell size revealed that average slope of watershed increases with decrease in DEM cell size, finer resolution of DEM. This falsification of topographic feature with low resolution DEM affects soil erosion and sediment behaviors in the watershed. The annual average sediment for Soyanggang-dam watershed with DEM cell size of 20 m was compared with DEM cell size of 100 m. There was 83.8% difference in simulated sediment without STOPFEE module and 4.4% difference with STOPFEE module applied although the same model input data were used in SWAT run. For Imha-dam watershed, there was 43.4% differences without STOPFEE module and 0.3% difference with STOPFEE module. Thus, the STOPFEE topographic database for Soyanggang-dam watershed was applied for Chungju-dam watershed because its topographic features are similar to Soyanggang-dam watershed. Without the STOPFEE module, there was 98.7% difference in simulated sediment for Chungju-dam watershed for DEM cell size of both 20 m and 100 m. However there was 20.7% difference in simulated sediment with STOPFEE topographic database for Soyanggang-dam watershed. The application results of STOPFEE for three watersheds showed that the STOPFEE module developed in this study is an effective tool to extract topographic feature of high resolution DEM from low resolution DEM. With the STOPFEE module, low-capacity computer can be also used for accurate hydrology and sediment modeling for bigger size watershed with the SWAT. It is deemed that the STOPFEE module database needs to be extended for various watersheds in Korea for wide application and accurate SWAT runs with lower resolution DEM.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.1
• /
• pp.111-118
• /
• 1996

In this paper, topographic edge points are detected from digital elevation model. Topographic edge points can be considered as the points which have rapid variation from its neighborhood. In this study, these points are dotected by Laplacian operator and noise reduction system is applied to remove small ripple. The results of this study show that Laplacian operator detects efficiently the topographic edge points, and that noise reduction system by local variance is efficient to remove small ripple but inefficient to reconstruct topographical features.