• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.714-716
• /
• 1997

In order to prevent the belt from being damaged by metal pieces, we developed multicoil-type metal detection system. This detects the presence of belt clips and position of metal pieces in ores being transported on conveyor belt. In this research, our coil sensor of multicoil-type metal detection system is divided into two parts, exciting part (transmitter coil) and sensing part composed of two receiver coils. Each receiver coil has several coils in the direction of belt width. Multicoil-type metal detection system is operated by supplying a transmitter coil with electric power resources to generate magnetic field, and then the change of magnetic flux resulted from a metal piece on the conveyor be a is induced into sensing coils. We can prevent detector from failing to catch metal pieces due to high threshold level produced by steel belt clips and male the sensitivity of belt-width direction uniform by using multicoil-type metal detection system. Besides, this developed system can recognize precise position and size of metal piece. The experiments shows that our multicoil-type metal detection system has better performances than the conventional metal piece detector.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.2 no.2
• /
• pp.149-158
• /
• 1998

Biomass of non-living brown seaweed Sargassun fluitans pretreated with NaOH is capable of taking up more than $10\%$ $(q_{max}$ : 3.85 mmol/g for Al and 1.48 mmol/g for Cu) of its dry weight in the Al and Cu at pH of 4.5. However, the maximum Al and Cu uptakes calculated from Langmuir isotherm were 1.58 mmol/g for Al and 1.35 mmol/g for Cu at pH 3.5. Equilibrium batch sorption study was performed using two-metal system containing Al and Cu. The mathematical model of the two-metal sorption system enabled quantitative estimation of one-metal biosorption inhibition due to the influence of a second metal. NaOH-treated S. fluitans contained 2.19 mmol $(43\;wt.\%)$ carboxyl groups per gram of biomass. A modified form of Langmuir, which assumes binding of Cu as $Cu^{2+}$ and Al as $Al(OH)_2^+,$ was used to model the experimental data. This result agrees with the one of mono-valent sorption for Al in single-metal system. The modified Langmuir model gives the following affinity correlated coefficients: 0.196 for Cu and 6.820 for Ah at pH 4.5, and 2.904 for Cu and 3.131 for Al at pH 3.5. The interference of Al in Cu biosorptive uptake was assessed by `cutting' the three dimensional uptake isotherm surfaces at constant second-metal final concentrations. Equimolar final equilibrium concentrations of Cu and Al of 1 mM at pH 4.5 give Cu and hi uptakes reduced by $82.5\%\;and\;5.4\%,$ respectively. However, these values at pH 3.5 were $55\%\;(Cu)\;and\;31\%$ (Al).

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.805-814
• /
• 2007

Statement of problem. Composite resin-veneered metal restorations can be used as an alternative to porcelain-fused-metal restorations. But, because of the relatively low bond strength of veneering composite to metal framework, various surface treatment methods have been introduced to improve the bond strength. Purpose. The object of this study was to compare the shear bond strength of different combinations of each of the two bonding systems and each of the two composite veneering resins to cp-Ti/Co-Cr alloy. Material and methods. Two resin bonding systems (metal conditioner containing MEPS monomer, tribochemical silicoating system) and two composite resins (Gradia, Sinfony) were tested on cp-Ti and Co-Cr alloy. Then, according to manufacturers' instructions, resin bonding systems and composite resins were applied. All test specimens were divided into four groups for each alloy; I) sandblast + Metal Primer II + Gradia (MG), II) sandblast + Metal Primer II + Sinfony (MS), III) Rocatec + Gradia (RG), IV) Rocatec + Sinfony (RS). The shear bond strength was determined using a universal testing machine and all data were statistically analyzed with Mann-Whitney test and Kruskal-Wallis test at the significance level of 0.05. Results. The mean (standard deviations) of shear bond strength according to the combinations of two bonding systems and two composite resins to cp-Ti arranged from 16.44 MPa to 17.07 MPa and the shear bond strength to Co-Cr alloy ranged from 16.26 MPa to 17.70 MPa. The result shows that the difference were not statistically significant. Conclusion. The shear bond strengths of composite resins to both cast cp-Ti and Co-Cr alloy were not significantly different between the metal conditioner and the tribochemical silicoating system. And no differences in bond strength were found between cp-Ti and Co-Cr alloy.

• Microbiology and Biotechnology Letters
• /
• v.21 no.4
• /
• pp.336-341
• /
• 1993

In metal-affinify aqueous two-phase systems, protein partitioning is affected by a variety of parameters such as pH, the number of surface-accessible histidines, and the amount and partition coefficient of metallated polythylene glyco(PEG) ligand. To enhance partitioning of proteins with surface-accessible histidines, we have synthesized and used a (Cu(II)-ininodiacetic acid)$_2$-PEG20,000($Cu(II)_2IDA_2$-PEG20,000) as well as Cu(II)IDA-PEG5,000 as an affinity ligand. The partition coefficient of $Cu(II)_2-IDA_2$-PEG20,000 in a PEG5,000/dextran two-phase system was 30.1, which corresponded to a 3.8-fold increase over that of Cu(II)IDA-PEG5,000. The partitioning experiments were performed on four proteins, horse cytochrome c, S. cerevisiae cytochrome c, horse myoglobin, and sheep myoglobin. Partitioning of proteins which convey surface-accessible histidines was enhanced dramatically by the addition of $Cu(II)_2IDA_2$-PEG20,000 ligand. These results demonstrate that enhanced partitioning of metal-binding proteins in an aqueous two -phase system can by achieved by using an appropriate metallated PEG ligand.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.104-107
• /
• 1996

This paper focuses on a automation selection of optimal cutting conditions and cycle time for multi-spindle metal cutting machines based on machining parameters and tool change schemes which are the two most common terms used in the metal cutting. In this research we used two step generative approach, step 1 is mathematical modeling for the selection fo optimal cutting conditions and the other is GMDH-Type modeling to estimate the system performance evaluation. We developed computer programs for these models and the fitting manufacturing examples are applied to this model and it was shown that the proposed approach has a good potential and offers a valuable tools to analyse the metal cutting system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.140.2-140
• /
• 2001

In this paper, we develop the system which inspects the metal mask using area scan camera and belu type xy-table and introduce its inspection algorithm. Thes whole area of the metal mask is divides into several inspection block and the sixe of a inspection block is decided by FOV(Field of View). To compare with the camera image of each block, the reference image is made by gerber file. The ratation angle of the metal mask is calculated through the linear equation that is substituted two end points of horizontal boundary of a specific hole in a camera image for. To calculate the position error caused by belt type xy-table, hough-transform using the distances among the holes in two images os used. The center of the reference image is moved as much as the calculated position error to be coincide with the camera image ...

• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.45-50
• /
• 1995

In order to densify LAS(Lithuim Aluminosilicate)system compounds, we used metal alkoxides as precursors. Also Mg was added by sol-gel method using metal alkoxides to the LAS system for improving the sinterability, thermal and mechanical properties. The result was that the synthesizing temperature was lowered about 10$0^{\circ}C$, the sintering temperature was lowered by over 10$0^{\circ}C$ and MOR of samples from metal alkoxides was two times larger than that of sample form oxide.

• Journal of the Korean Society of Visualization
• /
• v.9 no.4
• /
• pp.63-68
• /
• 2011

The flow-field of a liquid-metal system is very important for the safety analysis and the design of the steam generator of liquid-metal fast breeder reactor. Dynamic neutron radiography (DNR) is suitable for a visualization and measurement of a liquid metal flow and a two-phase flow in a metallic duct. However, the three dimensional DNR techniques is not enough to obtain the velocity information in the wide channel up to now. In this research, a high speed DNR technique was applied to visualize the heavy liquid-metal flow field in the narrow channel with the HANARO-beam facility. The images were taken with a high frame-rate neutron radiography at 250 fps and analyzed with a Particle Image Velocimetry(PIV) method. The images were compared with the results of the commercial CFX code to study the feasibility of DNR technique for the measuring the heavy liquid-metal flow field. The PIV images could discern the turbulent vortex flow in the two-dimensional narrow channel.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.207-212
• /
• 1997

In estimating the formability of sheet metal, the stereo vision system contributes the accuracy of strain of sheet metal, the convenience in measuring the strain of sheet metal, and the handiness in preparing the forming limit diagram by calculating the 3D values and strain of sheet metal. The algorithm has been developed so that the 3D-coordinate values of sheet metal could be calculated by image processing which is composed of camera calibration, and the stereo matching of images in two viewpoints. By comparing with experiments, the possibility and the convenience of algorithm has been verified, which could calculate the 3D-coordinate values of sheet metal automatically by using the preprocessing of the original image of sheet metal, which had the noise before adjusting the camera calibration and the stereo matching algorithm.

• Journal of Welding and Joining
• /
• v.34 no.4
• /
• pp.1-8
• /
• 2016

Metal AM(Additive Manufacturing) has been steadily developed and that is classified into two method. PBF(Powder Bed Fusion) deposited in the bed by the laser or electron beam as a heat source of the powder material and DED(Directed Energy Deposition) deposited by varied heat source of powder and solid filler material. In the developed countries has been applying high productivity process of solid filler metal based DED method to the aerospace and defense sectors. The price of the powder material is quite expensive compared to the solid filler metal. A study on DED method that is based on a solid filler metal is increasing significantly although was low accuracy and degree of freedom.