• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.6 no.1
• /
• pp.45-50
• /
• 2012

Thoracolumbar orthosis has been used for the rehabilitation of the patients with senile kyphosis. Recently, a number of different thoracolumbar orthosis designs have been introduced but its biomechanical effectiveness still remain unknown. In this study, we compared the pressure distribution on the surface of the trunk and stresses on the orthosis in relation to changes in connecting frame designs (Type 1, one-connecting frame type; Type 2, two-connecting frame type; Type 3, all-in-one type) using finite element (FE) models under different motions of the trunk. The results showed that Type 3 distributed the pressure on the trunk most evenly followed by Type 2 and Type 1 and the difference between Type 1 and Type 2 was negligible. ROM was limited most effectively by Type 3 ($8.5{\sim}9.4^{\circ}$), followed by Type 2 ($11.3{\sim}13.9^{\circ}$) and Type 1 ($12.1{\sim}15.4^{\circ}$). The ratio between the peak von Mises stress and yield strength of each material remained less than 20% regardless of orthosis type indicating low likelihood of component failure. In conclusion, our study found that all-in-one type of orthosis was the most effective design for the conservative treatment of spinal deformity in terms of function and comfort.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.532-540
• /
• 2010

The strength properties of wooden model retaining wall made of pitch pine (Pinus rigida Miller) was evaluated. Three different types of wooden model retaining wall were made of the 11cm square timber treated with CUAZ-2 (Copper Azole). The retaining wall was made into the 4 layers of crossbar and the 3 layers of vertical-bar, of which the size was 86 cm high, 200 cm long and 96 cm wide. Type I was control and in Type II 20 cm vertical-bars and 93 cm vertical-bars were arranged alternately to decrease wood usage. TypeIII was similar to TypeII except that the connection between crossbars was reinforced with the wooden armature. In each type, the strength properties of retaining wall were investigated by horizontal loading test and the deformation of structure by image processing (AICON 3D DPA-PRO system). In horizontal loading test of Type I, Type II and Type III was 63.17, 57.80, and 60.97 kN/m, respectively. The deformation of the top layer in Type II was 1.5 times larger than in Type I and Type III. Consequently, the economic efficiency and strength performance were better in Type III than in Type I and Type II.

• Journal of the Korean Society of Costume
• /
• v.56 no.5 s.104
• /
• pp.59-74
• /
• 2006

The purpose of this study is to investigate the skin type of $20{\sim}30’s$ women that use skin type test paper of cosmetic companies and usual using condition for the cosmetics. The result is as follows; The research target is $20{\sim}30’s$ woman in Seoul area, around capital city area and Geonra province, we surveyed the difference among the group, after dividing the groups with job, monthly income. As the result of research on the usual using cosmetics and cleansing products, $20{\sim}30’s$ woman mostly have toilet water, lotion and foam type cleansing product and use them. As the result of consciousness of skin type combination skin type is 46.1%, dry skin type is 23%, oily skin type is 15%, sensitive skin type is 9%, normal skin type is 7%. To compare results of skin type test paper of cosmetics companies with consciousness of skin type, result of skin type test paper of cosmetics companies was different consciousness of skin type. The result of skin type test paper of B company is same as consciousness of skin type is 31.2% and this result among cosmetics companies was appeared high ratio. Among the results from 3 companies, the rate that all result for 1 person's skin type are accord, is just 8%. 2 companies among them have matching rate of 42%. Most of all, each results of skin type test paper of cosmetics companies was appeared difference. This result show the problem of objectivity about skin type test paper of cosmetics companies that they using it.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.4
• /
• pp.388-396
• /
• 2011

Sun tracking system is the most important subsystem in parabolic dish type solar thermal power plant, since it determines the amount of thermal energy to be collected, thus affects the efficiency of solar thermal power plant most significantly. Various types of sun tracking systems are currently used. Among them, use of photo sensors to located the sun(which is called sensor type) and use of astronomical algorithm to compute the sun position(which is called program type) are two of the mostly used methods. Recently some uses CCD sensor, like CCD camera, which is called image processing type sun tracking system. This work is concerned with the analysis of sun tracking performance of various types of sun tracking systems currently used in the parabolic dish type solar thermal power plant. We first developed a sun tracking error measurement system. Then, we evaluate the performance of five different types of sun tracking systems, sensor type, program type, hybrid type(use of sensor and computed sun position simultaneously), tracking error compensated program type and image processing type. Experimentally obtained data shows that the tracking error compensated program type sun tracking system is very effective and could provide a good sun tracking performance. Also the data obtained shows that the performance of sensor type sun tracking system is being affected by the cloud significantly, while the performance of a program type sun tracking system is being affected by the sun tracking system's mechanical and installation errors very much. Finally image processing type sun tracking system can provide accurate sun tracking performance, but costs more and requires more computational time.

• The korean journal of orthodontics
• /
• v.37 no.1 s.120
• /
• pp.5-15
• /
• 2007

Objective: The purpose of this study was to evaluate the mechanical performance of mini-screws during insertion into artificial bone with use of the driving torque tester (Biomaterials Korea, Seoul, Korea), as well as testing of Pull-out Strength (POS). Methods: Experimental bone blocks with different cortical bone thickness were used as specimens. Three modules of commercially available drill-free type mini-screws (Type A; pure cylindrical type, Biomaterials Korea, Seoul, Korea, Type B; partially cylindrical type, Jeil Medical, Seoul, Korea, Type C; combination type of cylindrical and tapered portions, Ortholution, Seoul, Korea), were used. Results: Difference in the cortical bone thickness had little effect on the maximum insertion torque (MIT) in Type A mini-screws. But in Type B and C, MIT increased as the cortical bone thickness Increased. MIT of Type C was highest in all situations, then Type B and Type A in order. Type C showed lower POS than Type A or B in all situations. There were statistically significant correlations between cortical bone thickness and MIT, and POS for each type of the mini-screws. Conclusion: Since different screw designs showed different insertion torques with increases in cortical bone thickness, the best suitable screw design should be selected according to the different cortical thicknesses at the implant sites.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.6
• /
• pp.532-539
• /
• 1991

This study was conducted to screen genetic stock for resistant to pod shedding. Materials used were 7 recommended varieties in Korea and 211 introduced varieties containing 94 Virginia type, 99 Spanish type and 18 Valencia type varieties. the days from seeding to first anthesis. number of mature pods per plant. 100 seeds weight and shedded pod ratio per total mature pod at harvesting were investigated. And the breaking tensile strength required to detach a pod from its gynophore was measured at a proper time for harvesting of each variety. In addition. factors related to pod shedding were discussed. The first anthesis of Spanish and Valencia types were earlier than that of Virginia type, but Korean recommended varieties which were recognized as Virginia type had relatively earlier anthesis. The varieties of Spanish type yielded more pods compared with those of Valencia and Virginia types. but Korean recom-mended varieties yielded slightly more pods than the others. Seeds weight of Korean recommended varieties was larger than not merely those of Spanish and Valencia types which were small seeds but also those of Virginia type which were large seeds. The breaking tensile strengths between pod and gynophore were various among the varieties belonging to same type. The strength was relatively strong in the Spanish type, but weak in both Virginia type and Korean recommended varieties. Therefore, pod shedding in the varieties of Spanish type was low and high in Virginia type and Korean recommended varieties. There were positive or negative correlations at the 0.1 % significan level among the days to first anthesis. number of pods per plant. seed weight, breaking tensile strength and shedding ratio. The pod shedding is considered a compound character that is affected by the factors such as breaking tensile strength between pod and gynophore, number of pods per plant and seed size.

• Journal of the Korean Home Economics Association
• /
• v.35 no.6
• /
• pp.15-24
• /
• 1997

The objective of this study were to examine the relationships between clothing design preference, clothing attitude and sex role identity. Using the data collected through interview questions. 200 subjects who were 60years of age and older in Kunsan, Korea, the data were analyzed using $X^2$-test. The results of the study were the followings. 1. The androgynous type liked two button single jacket and the masculine and indifferentiate type three button single jacket, while the femin type liked soutien collar jacket in their woman. 2. The androgynous type' purchase motive was 'enough money' 'finding like clothing' while the masculine type's 'to attend meeting'. The feminine type's motive was 'enough money' and the indifferentiate type 'to attend meeting'. Clothing selection motive was more influenced the androgynous type than the feminine and indifferentiate type by 'design'. 3. The androgynous type felt 'indifferent' for dare clothing of the aging, the masculine type 'hate', the feminine type 'I like to', and the indifferentiate type 'look so good'.

• Journal of electromagnetic engineering and science
• /
• v.5 no.4
• /
• pp.172-175
• /
• 2005

Sometimes, it is more convenient to use paint-type and spray-type EM wave absorbers than bulk-type or sheet-type. Thus, in this paper, we prepared paint-type and spry-type EM wave absorbers. The proportion of ferrites to paints, particle size of magnetic material, and kinds of paint should be considered to prepare a superior paint-type EM wave absorber. There is no big gap between spray-type and paint-type in EM wave absorption of EM wave absorbers prepared with same composition.

• Korean Institute of Interior Design Journal
• /
• no.17
• /
• pp.60-64
• /
• 1998

The results of simulation on greenery ratio using CG are as follows: arrangement type of optimal condition and greenery ratio were summarized as below as dispersion type and 5% ratio greenery for 20 pairs of assessment items and these assessment items were classified into 5 factors as a result of factor analysis,. These factors were Harmony Animation Atmosphere texture Peculiarity. Verification results of factors differences according to each condition can be. there was no apparent difference among factors in accordance with gender, In case of arrangement type dispersion type was higher than concentration type in all factors. Based on the above results dispersion type was assessed higher than concentration type the most suitable condition of Harmony Factor was 5% dispersion type Animation Factor was 5% dispersion type Animation Factor was 7% dispersion type Atmosphere Factor was 10% dispersion type Texture Factor was 5% concentration type and $\ulcorner$Peculiarity Factor$\lrcorner$was 7% concentration type.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.8
• /
• pp.1624-1632
• /
• 2009

In this study, we introduce the design methodology of an optimized Interval Type-2 fuzzy controller. The fixed MF design of type-1 based FLC leads to the difficulty of rule-based control design for representing the linguistically uncertain expression. In the Type-2 FLC as the expanded type of Type-1 FLC, we can effectively improve the control characteristic by using the footprint of uncertainty(FOU) of membership function. Type-2 FLC has a robust characteristic in the unknown system with unspecific noise when compared with Type-1 FLC. Through computer simulation as well as practical experiment, we compare their performance by applying both the optimized Type-1 and Type-2 fuzzy cascade controllers to ball and beam system. To evaluate each controller performance, we consider controller characteristic parameters such as maximum overshoot, delay time, rise time, settling time and steady-state error.