• Journal of The Korean Association For Science Education
• /
• v.41 no.2
• /
• pp.93-102
• /
• 2021

In this study, we investigated the characteristics of inquiry problems set by high school students who observed an 'unexpected phenomenon' and identified the effects of providing scientific information on setting inquiry problems. The subjects of this study were 126 eleventh grade students in Seoul that were randomly assigned to group A (N=66) and group B (N=60). In the study, watching a video of about 45 seconds of the unexpected phenomenon repeatedly for 20 minutes, all the students freely wrote inquiry problems that they wanted to carry out in their handouts. At this time, it is characterized that only the handout of group B additionally included scientific information on the unexpected phenomenon. As a result of the study, students, regardless of group, set more 'curiosity-oriented inquiry problems (i.e., focusing on inquiries they want to do rather than revealing what might be the cause of the phenomenon)' rather than going into a 'cause-oriented inquiry problem solving (i.e., revealing the cause of the phenomenon).' Among the curiosity-oriented inquiry problems, most of them were 'new-result inquiry problems (i.e., investigating what new results will occur by simply manipulating experimental situations).' It was also found that students who were provided with the scientific information tended to set significantly more inquiry problems using the provided information than those who were not (χ2(1)=8.996, p<.01), nevertheless the students with the scientific information did not set significantly more cause-oriented inquiry problems (χ2(1)=1.376, p>.05). The findings have been discussed from the four perspectives (i.e., lack of provided information, lack of opportunities to internalize the provided information, personal curiosity-seeking, and intuitive thinking), and implications for inquiry problem setting were suggested.

• Earthquakes and Structures
• /
• v.23 no.1
• /
• pp.87-100
• /
• 2022

Limiting the displacement of seismic isolators causes a pounding phenomenon under severe earthquakes. Therefore, the ASCE 7-16 has provided minimum criteria for the design of the isolated building. In this research the seismic response of isolated buildings by Triple Friction Pendulum Isolator (TFPI) under the impact, expected, and unexpected mass eccentricity was evaluated. Also, the effect of different design parameters on the seismic behavior of structural and nonstructural elements was found. For this, a special steel moment frame structure with a surrounding moat wall was designed according to the criteria, by considering different response modification coefficients (RI), and 20% mass eccentricity in one direction. Then, different values of these parameters and the damping of the base isolation were evaluated. The results show that the structural elements have acceptable behavior after impact, but the nonstructural components are placed in a moderate damage range after impact and the used improved methods could not ameliorate the level of damage. The reduction in the RI and the enhancement of the isolator's damping are beneficial up to a certain point for improving the seismic response after impact. The moat wall reduces torque and maximum absolute acceleration (MAA) due to unexpected enhancement of mass eccentricity. However, drifts of some stories increase. Also, the difference between the response of story drift by expected and unexpected mass eccentricity is less. This indicates that the minimum requirement displacement according to ASCE 7-16 criteria lead to acceptable results under the unexpected enhancement of mass eccentricity.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.10
• /
• pp.7-13
• /
• 1997

A modern electronic system located at a certain distance form the discharge may respond with unexpected sensitivity ot that phenomenon, even if the phenomenon is so slight as to have been ignored in the port. It has been found that electromagnetic wave energy is emitted as a results of this electrostatic discharge between metallic objects. In order to theoretically examine the peculiar phenomenon, we propose an analytical approach to model the indirect ESD effect. A soruce model is given here using the spark resistence presented by rompe-weizel. A model experiment for indirect eSD is also conducted to express ESD detection rate by the statistical estimation. We verify that the statistical estimations agree the theoretical curve resulted from the rompe-weisel resistence.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.917-920
• /
• 2003

The sloshing phenomenon sometimes happens to occur in a liquid fuel tank due to the unexpected and/or inevitable vibrating conditions and may result in severe effects on the structural stability. This study deals with the development of experimental techniques for the evaluation of sloshing behaviors in the liquid fuel tank and for the identification of natural frequencies and mode shapes by varying with various vibrating conditions. Measurements of the pressure and load acting on the side surface of vibrated liquid fuel tank are carried in order to identify the effects of sloshing phenomenon by using various types of baffles. The results show that the baffles can be used to minimize the sloshing phenomenon in liquid fuel tank effectively

• Structural Engineering and Mechanics
• /
• v.60 no.6
• /
• pp.923-937
• /
• 2016

The common prospect in diminishing mine-blast vibration is decreasing vibration with increasing distance. This paper indicates that, contrary to the general expectancy, vibration waves change their forms when they are travelling through the low velocity layer like coal and so-called guided waves moving the vibration waves to longer distances without decreasing their amplitudes. The reason for this unexpected vibration increase is the formation of guided waves in the coal bed which has low density and low seismic velocity with respect to the neighboring layers. The amplitudes of these guided waves, that are capable of traveling long distances depending on the seam thickness, are several times higher than that of the usual vibration waves. This phenomenon can many complaints from the residential areas very far away from the blasting sites. Thus, this unexpected behavior of the coal beds in the surface coal mines should also be considered in vibration minimization studies. This study developed a model to predict the effects of guided waves on the propagation ways of blast-induced vibrations. Therefore, vibration mitigation studies considering the nearby buildings can be focused on these target places.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.2
• /
• pp.69-75
• /
• 1997

A modern electric system located at a certain distance from the discharge may respond with unexpected sensitivity, when an electrostatic discharge (ESD) phenomenon occurs heteronomously between metallic objects. For analyzing the transient electromagnetic fields caused by ESD, two resistance formulas - Toepler and Rompe-Weizel -are introduced. The experimental result given by Wilson-Ma are used to compare which of these resistance formulas is proper.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.148-153
• /
• 2002

Spring back is the typical deformation of pressing process. This phenomenon much affects productivity and especially Incurs the unexpected result of assembling process. We have been searching for the various of the spring back to minimize spring back effect, because it is inevitable.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.314-317
• /
• 2002

The sloshing phenomenon sometimes happens to be occurred in the liquid storage tank due to the unexpected and/or inevitable vibrating conditions and may result in severe effects on the structural stability. This study deals with the development of experimental techniques for the evaluation of sloshing behavior in the liquid storage tank and for the identification of natural frequencies and mode shapes by varying with various vibrating conditions. In addition, suitable method is suggested to minimize the sloshing effect on the liquid storage tank and its validity is experimentally investigate d.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.220-222
• /
• 2005

Power system restoration following a wide area or complete blackout starts with energizing primary restorative transmission systems. During this primary restoration process, unexpected over-voltage may happen due to nonlinear interaction between the unloaded transformer and the transmission system. This is known as the harmonic resonance phenomenon that may cause burning out of transformer or other devices. Since the harmonic resonance originates from the nonlinear characteristics, it is very difficult to predict the occurrence of this phenomenon. This paper reports the possible existence of the harmonic resonance in Korean power system. Analysis of the harmonic over-voltage is presented based on the various simulations using PSCAD/EMTDC.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.5
• /
• pp.191-194
• /
• 2006

Power system restoration following a wide area or complete blackout starts with energizing primary restorative transmission systems. During this primary restoration process, unexpected over-voltage may happen due to nonlinear interaction between the unloaded transformer and the transmission system. This is known as the harmonic resonance phenomenon that may cause burning out of transformer or other devices. Since the harmonic resonance originates from the nonlinear characteristics, it is very difficult to predict the occurrence of this phenomenon. This paper reports the analyses of the harmonic resonance occurred in domestic power system. Various analyses and results of the harmonic over-voltage is presented based on the PSCAD/EMTDC simulations.