• 대한약침학회지
• /
• 제9권2호
• /
• pp.105-111
• /
• 2006

Objectives : This study was conducted to carry out Purification of Melittin and other peptide components from Bee Venom using gel filtration chromatography and propionic acid/urea polyacrylamide gel electrophoresis Methods : Melittin and other peptide components were separated from bee venom by using gel filtration chromatography on Sephadex G-50 column in 0.05M ammonium acetate buffer. Results : Melittin and other peptide components were separated from bee venom by using gel filtration chromatography on Sephadex G-50 column in 0.05M ammonium acetate buffer. The fractions obtained from gel filtration chromatography was analyzed by using SDS-PAGE and propionic acid/urea polyacrylamide gel electrophoresis. The melittin obtained from the gel filtration contained residual amount of phospholipase $A_2$ and a protein with molecular weight of 6,000. The contaminating proteins were removed by the second gel filtration chromatography. Conclusion : Gel filtration chromatography and propionic acid/urea polyacrylamide gel electrophoresis are useful to separate peptide components including melittin from bee venom.

• 미생물학회지
• /
• 제29권4호
• /
• pp.221-225
• /
• 1991

The RNA transcripts produced from in vitro transcription reaction of BTV core were analyzed on agarose-urea gel. Fast migrating abortive RNAs, in addition to full length species of RNA, were observed. Fast migrating RNAs extracted from agarose-urea gel were hybridized to all 10 segments of genomic ds RNA, while solw migrating RNAs extracted from agarose-urea gel were hybridized only to the large and medium size genomic ds RNA. These results indicate that fast migrating RNA transcripts are most likely the products of abortive transcription.

• 한국응용과학기술학회지
• /
• 제24권4호
• /
• pp.339-346
• /
• 2007

The influence of adding urea to phenol-formaldehyde (PF) resins as a co-polymer component were investigated aiming at synthesizing useful phenol-urea-formaldehyde resins. Urea was added at 10% by total resin weight. Several methods for the addition of urea to the PF resins during synthesizing resins to see the co-polymerization occurs between urea and PF resins. The urea was added at the beginning, at three different middle stages, and at the end of PF resin synthesis. The copolymerized methylene bridges between phenol and urea molecules were not observed by $^{13}C-NMR;$ no signal around 50ppm. The curing of urea-modified PF resins, evaluated by dynamic mechanical analysis(DMA), showed some differences among the resins. DMA gel times ranged from 2.75 min to 3.25 min and the resins made with earlier urea additions showed slightly shorter gel times. The longest cure time and gelation time was observed for the resin PFU. Catalyst effects on the DMA cure time values of resins were not significant with different amounts of catalyst or different types of catalyst for all resins tested. Gel times of urea-modified PF resins shortened the most by triacetin catalyst.

• 헤리티지:역사와 과학
• /
• 제44권4호
• /
• pp.130-141
• /
• 2011

본 연구에서는 넓은 pH영역에서도 증점효과를 가지는 카보풀 수지 940, 934를 가지고 중화제(sodium meta silicate, triethylamine)별 겔을 제조하여 10% 과산화요소를 첨가하고, 이에 따른 표백효과를 알아보았다. 실험 결과 메타규산나트륨(sodium meta silicate) 1.6g을 첨가한 실험군에서 표백효과의 최적 조건인 pH 10을 충족시키고 있다. 또한 각군별 대조군 Baseline 색 변화량(${\Delta}E*ab$)과 시간별 색 변화량(${\Delta}E*ab$)을 비교해 보면 1군(카보풀 940, 메카규산나트륨, 과산화요소)은 CS-2에서 112%, CS-4는 63.3%, CS-6은 87.4%의 표백효율을 나타냈으며, 2군(카보풀 934, 메카규산나트륨, 과산화요소; CS-8, CS-10, CS-12)에서는 순서대로 77.3%, 67.3%, 109.%로 나타났다. 그리고 3군(카보풀 940, 트리에탄올아민, 과산화요소;CT-1, CT-3, CT-5)에서 36.8%, 73.2%, 74% 순으로, 4군(카보풀 934, 트리에탄올아민, 과산화요소; CT-6, CT-8, CT-10)에서는 81.7%, 95.4%, 95.7%의 표백효율을 보였다. 따라서 중화제 비율이 증가함에 따라 표백표율이 높아지는 것을 알 수 있었으며 메타규산나트륨을 중화제로 첨가한 것보다 트리에탄올을 중화제로 첨가한 것이 표백효율이 다소 높은 것을 알 수 있었다. 그러나 실험에 사용된 겔의 점도는 메타규산나트륨을 첨가한 군에서 점도가 트리에탄올아민을 첨가한 겔보다 높았다. 이는 유약이 시유된 경사진 도자기 표면에 표백겔이 흐르지 않고 부착되는 장점이 될 수 있다. 그러므로 10% 과산화요소 표백겔을 만들고자 할 때 메타규산 나트륨을 첨가하면 증점효과와 원하는 표백효과를 얻을 수 있을 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권5호
• /
• pp.67-75
• /
• 2007

As a part of abating the formaldehyde emission of urea-formaldehyde (UF) resin adhesive by lowering formaldehyde to urea (F/U) mole ratio, this study was conducted to investigate properties of UF resin adhesive with different F/U mole ratios. UF resin adhesives were synthesized at different F/U mole ratios of 1.6, 1.4, 1.2, and 1.0. Properties of UF resin adhesives measured were non-volatile solids content, pH level, viscosity, water tolerance, specific gravity, gel time and free formaldehyde content. In addition, a linear relationship between non-volatile solids content and sucrose concentration measured by a refractometer was established for a faster determination of the non-volatile solids content of UF resin. As F/U mole ratio was lowered, non-volatile solids content, pH, specific gravity, water tolerance, and gel time increased while free formaldehyde content and viscosity were decreased. These results suggested that the amount of free formaldehyde strongly affected the reactivity of UF resin. Lowering F/U mole ratio of UF resin as a way of abating formaldehyde emission consequently requires improving its reactivity.

• Journal of Applied Biological Chemistry
• /
• 제42권3호
• /
• pp.125-129
• /
• 1999

The changes in gel characteristics of soy protein and succinylated soy protein due to various specific interaction-altering reagents which affect the formation and textural properties of gels, were studied. The reagents were added to 15% soy protein solutions prior to heat treatment. Succinylated soy protein formed harder gel without the addition of reagents. Hardly no gels were formed with urea, indicating that hydrogen bonds significantly contributed to the formation and hardness of the gel and the effects of urea on the hardness of succinylated soy protein gel were more significant. Disulfide bonds were important in the formation of hard gels whether they were succinylated or not, but the contributions of hydrophobic interactions to gel hardness were relatively insignificant. The hardness reducing effects of NaCl and NaSCN were more significant in succinylated soy protein gel. As such, electrostatic interactions were important for succinylated soy protein to form hard gel but not for unmodified soy protein.

• 미생물학회지
• /
• 제25권1호
• /
• pp.23-27
• /
• 1987

바이로이드 RNA 분자를 포함한 저분자량의 식물성 RNA 분자에 대해서 0M부터 8M 까지의 요소구배를 가진 폴리아크릴아미드켈을 이용하여 전기영동적 이동성을 조사하였다. 막대모양의 바이로이드 RNA 분자는 요소구배 겔에서 전반적으로 다른 저분량의 식물성 RNA들과 마찬가지로 요소구배에 수직인 방향으로 비슷한 수준의 전기영동적 이동성을 보여주었다. 이와 달리 고리모양의 바이로이드 RNA 분자는 요소구배 겔에서 고농도의 요소구배 부분에서 보다도 저 농도의 요소구배 부분에서 더 빠르게 이동하였다. 따라서 고리모양의 바이로이드 RNA 분자는 요소구배 겔의 중간부분에서 막대모양의 바이로이드 분자의 밴드를 가로 지르는 기울기를 가진 특이한 전기영동적 이동을 나타내었다. 결과적으로 고리모양의 바이로이드 RNA 분자의 전기영동적 이동성은 0M 8M의 요소구배를 가지는 바이로이드 RNA 분자의 변성겔에서 주로 요소의 농도에 따라서 영향을 받는 것으로 보인다.

• 한국식품저장유통학회지
• /
• 제5권1호
• /
• pp.65-71
• /
• 1998

The changes in gel characteristics of soy protein as a result of various reagents that alter specific interactions which affect the formation and textural properties of gels, were studied. The reagents were added to 15% soy protein solutions prior to heat treatment. The gels were not formed with urea, indicating that hydrogen bonds significantly contributed to the formation and hardness of soy protein gel. Hydrophobic interactions and disulfide bonds compensated for hydrogen bonds and the contributions of electrostatic interactions to gel hardness are relatively insignificant. The farce primarily responsible for gel cohesiveness appeared to be disulfide bonds, because a significant decrease in cohesiveness was found only with the presence of N-ethylmaleimide. Adhesiveness decreased only with the addition of urea, and thus the contribution of hydrogen bonding to adhesiveness of gel could be concluded to be resent. However, adhesiveness was suggested to be interpreted not only wile molecular forces involved in gel formation but also with hydration properties of protein.

• Journal of the Korean Wood Science and Technology
• /
• 제35권5호
• /
• pp.76-86
• /
• 2007

This study was conducted to investigate the effects of formaldehyde to urea (F/U) mole ratio on thermomechanical curing of UF resin adhesives with different F/U mole ratios. Thermomechanical curing of these UF resin adhesives was characterized using parameters of dynamic mechanical analysis (DMA) such as the gel temperature, maximum storage modulus, and peak temperatures of storage and loss modulus. As the F/U mole ratio decreased, the gel temperature of UF resin adhesives increased. The maximum storage modulus as an indicator of the rigidity of UF resin adhesives decreased with decreasing F/U mole ratio. The peak temperature of tan $\delta$ increased with decreasing F/U mole ratio, indicating that the vitrification occurred faster for high F/U mole ratio of UF resin adhesives than for the one of lower F/U mole ratio. These results partially explained the reason why UF resin adhesives with lower F/U mole ratio resulted in relatively poor adhesion performance when they were applied.

• 한국식물병리학회지
• /
• 제3권4호
• /
• pp.239-244
• /
• 1987

감자 걀쪽바이로이드(PSTV) RNA분자를 포함한 저분자량의 식물성 RNA분자에 대해서 0M부터 8M까지의 요소농도구배를 가진 폴리아크릴아마이드겔을 이용하여 1/40, 1/10로 희석한 완충액조건과 $17^{\circ}C,\;37^{\circ}C,\;57^{\circ}C$의 온도조건에서 전기영동을 실시하였다. 바이로이드의 RNA분자가 환상과 선상의 두가지 분자로 나뉘어지는 변성조건에서는 1/40로 희석한 TBE완충액을 포함하는 요소농도구배겔을 $57^{\circ}$에서 전기영동을 실시하는 것이 효과적이었다. 변성된 환상의 바이로이드분자에 대한 전기 영동적 이동성은 주로 요소의 농도에 따라 영향을 받는 것으로 보이는데, 이와 더불어 저 농도의 TBE완충액이 요소농도구배겔에서 환상과 선상바이로이드분자 사이에서 전기영동적 분리를 증가시켜 주었다.