• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.37
• /
• pp.111-115
• /
• 1996

This study is to decide each level ordering policy for deterministic demand in multilevel distribution system. The ordering policy is used the combinations of EOQ and LTC. The combinations of EOQ and LTC are 4 cases. Case 1 : Regional Warehouse∼EOQ, Central Warehouse∼EOQ. Case 2 : Regional Warehouse∼EOQ, Central Warehouse∼LTC. Case 3 : Regional Warehouse∼LTC, Central Warehouse∼EOQ. Case4 : Regional Warehouse∼LTC, Central Warehouse∼LTC. The criterion is to minimize total cost per year.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.98-99
• /
• 2021

The number of fires in the Korean distribution warehouse increased by about 350 from 1,070 in 2014 to 1,416 in 2020. In addition, the fire load increases with the scale of the distribution warehouse, and even if the automatic sprinkler operates, there is a limit to the direct intrusion of the water source into the ignition source, and the detector is often installed on a high ceiling. The sensing time is often delayed. In order to improve the fire safety of such distribution warehouses, the US NFPA stipulates in detail the contents related to the facility, such as sprinkler water discharge standards, rack-type warehouse installation height restrictions, and regulations on collection and equipment. However, in Japan, the goods loaded inside the distribution warehouse are not classified in detail, and it is considered that the fire safety for the distribution warehouse is low due to the relaxation regulations of the fire prevention section. Therefore, in this study, common problems are classified into material, spatial, and safety management characteristics through the cases of distribution warehouse fires that occurred in Korea and abroad, and the problems related to distribution warehouses in Korea and abroad are compared and analyzed. And present basic materials for improving the life safety standards of future distribution warehouse facilities.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.34
• /
• pp.15-23
• /
• 1995

We study how to determine backorder cost at the warehouse in a one-warehouse/N-retailer distribution system such that channel efficiency (minimizing total system costs) is improved. We define backorder costs as compensation that the warehouse pays to the retailer for the number or orders delayed due to stockout at the warehouse. We answer two questions : (1) "Should the warehouse compensate for his backorder\ulcorner" and (2) "Is there any equilibrium for both the warehouse and retailer while they are seeking for their own profits\ulcorner" We show that : (1) "The warehouse should pay backorder costs for the sake of channel efficiency." and (2) "There exists an equilibrium that is infiuenced by the amount of compensation." First, we prove the existence of a mutually acceptable equilibrium for both the warehouse and the retailer, which is different from Nash equilibrium because they independently maximize their respective profits with incomplete information about each other. Second, we prove that the equilibrium moves to a point such that channel efficiency is improved if the warehouse compensates the retailers for his backorders. We show the existence of an optimal compensation that minimizes total system costs. Third, we show that the amount of optimal compensation increases as the ratio of mean lead time for the warehouse to that for the retailer increases.ouse to that for the retailer increases.

• Journal of Korean Society for Quality Management
• /
• v.16 no.2
• /
• pp.48-55
• /
• 1988

There have been several papers to illustrate how an information system is used in an automated warehouse system. These papers, however. do not carefully address the role of warehouse planning/control systems nor do they recognize how to integrate the management planning/control systems, and automated warehouse system. This article addresses such issues and shows how a business computer system can be used to integrate and unify the warehouse planning/control systems and the automated warehouse system into it single and highly productive operating system.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1574-1579
• /
• 2010

This paper deals with the development of warehouse layout design algorithm. In the developed model, receiving/outgoing areas, storage areas, picking/distribution areas, value-added operation areas and support areas are considered. For more efficient use of the warehouse floor space, a mezzanine floor is also considered. We develop heuristic algorithms of warehouse layout design for several cases: three types of warehouse and three types of flow. This study is expected to be used as a guideline in warehouse layout design phase.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.168-170
• /
• 2003

In this paper, we discuss the concept of Spatio-Temporal Data Warehouse and analyze the organization model of spatio-temporal data. Based on the above, we found the framework of Spatio-Temporal Data Warehouse composed of data source, processing tools and application, which covers the whole process from building warehouse to supplying services.

• IE interfaces
• /
• v.15 no.4
• /
• pp.382-390
• /
• 2002

This paper deals with planning of order-picking warehouse considering the batch order picking for transportation equipments to pick consumers' orders at a time among order-picking methods and a systematic approach method in order to analyze the order-picking warehouse which can perform optimal operation. To estimate an operating time of transportation equipments to carry out order-picking, this paper suggests three operations : first, to design the refrigerated warehouse using warehouse design parameters, second, to calculate the travel time of transporters considering four types of times with the probabilistic picking frequency, and third, to analyze an order-picking warehouse to construct a simulation model with the AutoMod as a simulation tool. We apply this model to a refrigerated warehouse company in Busan.

• IE interfaces
• /
• v.16 no.spc
• /
• pp.105-110
• /
• 2003

This paper deals with a performance evaluation model of transporters in refrigerate warehouse. This study focussed on determining refrigerate warehouse design to minimize the expected travel time to improve the transporter performance and to minimize the operating costs. This study proposes the important detail aspects of refrigerate warehouse design, operational parameters and congestions. For solving this problem, we have shown a mathematical model to compute the initial value of the system performance and also a simulation model using AutoMod. A systematic approach proposed in this study for an optimal planning of order-picking warehouse is known as an effective method for the planning of order-picking warehouse and a performance evaluation problem of refrigerate warehouse operation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.34
• /
• pp.193-204
• /
• 1995

Many studies show that the value of the warehouse is good. However, studies explicitly mention the tradeoff between costs of operating the warehouse and benefits from the warehouse. Also, it is important to know when the benefits overcome the costs. We study a one-warehouse/N-retailer(s,Q) distribution system with stochastic lead times in order to answer two questions: "What are the optimal policies of the system that minimizes total system costs\ulcorner" and given the optimal policies, "Is the value of the warehouse always good\ulcorner" We use an analytical model for answering the questions. We find that the optimal policies are different from those with deterministic lead times. In fact it is reverse. We alse find the existence of the breakeven point beyond which the benefits starts overcomming the costs. And, we show that one of the breakeven points is the mean ratio of a supplier's lead time to transportation lead time between the warehouse and the retailer. Finally, we show that the breakeven point is sensitive to the ratio of holding costs of the warehouse and the retailer and it is also sensitive to the unit backorder costs at the retailer.sts at the retailer.

• Korea Journal of Hospital Management
• /
• v.28 no.3
• /
• pp.1-14
• /
• 2023

Purposes: It is very important to establish a clinical data warehouse based on a common data model to offset the different data characteristics of each medical institution and for drug surveillance. This study attempted to establish a clinical data warehouse for Dankook university hospital for drug surveillance, and to derive the main items necessary for development. Methodology/Approach: This study extracted the electronic medical record data of Dankook university hospital tracked for 9 years from 2013 (2013.01.01. to 2021.12.31) to build a clinical data warehouse. The extracted data was converted into the Observational Medical Outcomes Partnership Common Data Model (Version 5.4). Data term mapping was performed using the electronic medical record data of Dankook university hospital and the standard term mapping guide. To verify the clinical data warehouse, the use of angiotensin receptor blockers and the incidence of liver toxicity were analyzed, and the results were compared with the analysis of hospital raw data. Findings: This study used a total of 670,933 data from electronic medical records for the Dankook university clinical data warehouse. Excluding the number of overlapping cases among the total number of cases, the target data was mapped into standard terms. Diagnosis (100% of total cases), drug (92.1%), and measurement (94.5%) were standardized. For treatment and surgery, the insurance EDI (electronic data interchange) code was used as it is. Extraction, conversion and loading were completed. R language-based conversion and loading software for the process was developed, and clinical data warehouse construction was completed through data verification. Practical Implications: In this study, a clinical data warehouse for Dankook university hospitals based on a common data model supporting drug surveillance research was established and verified. The results of this study provide guidelines for institutions that want to build a clinical data warehouse in the future by deriving key points necessary for building a clinical data warehouse.