• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.3 s.43
• /
• pp.251-256
• /
• 1992

As a basic expriment to find out the thermal insulation effect of bedding KES-F7 was used to measure. The warmth retaining ratio of the six kinds of filling materials as cotton, wool , silk, down, cotton/polyester was measured, and the infleunce on the warmth retaining ratio of the warmth retaining ratio and humidity by the material was investigated. The results obtained are as follows: 1. The warmth retaining ratio of each filling material was shown to range from $70\%$ to $77\%$ . The warmth retaining ratio of each material preyed to be high in order down> polyester> cotton/polyester>cotton>silk>wool fiber. 2. The warmth retaining ratio of each filling material decreased with the inclose of the humidity The effective reduction rate by filling fiber's was high in order wool>cotton>cotton/polyester>silk>down>polyester material. 3. The warmth retaining ratio of each filling material was shown to be in counter-correlation with the humidity, and the correlation coefficient (r=0.94-0.98) proved to be highly signi-ficant.

• Fashion & Textile Research Journal
• /
• v.9 no.4
• /
• pp.445-449
• /
• 2007

The results of warmth retaining, heat transfer and compressive elastic recovery of the five kinds of bedspread fabrics, which were produced from packing weft of 2700 denier and 3600 denier batt yarn treated with raw material of Polyester $150^D$/48 DTY, are as follows: 1) 3600 denier packing weft showed lover count in compressive elastic recovery than 2700d packing weft, so it took longer time to recover. 2) When packing weft of the same count is used, a sample of packing weft with higher density showed lower recovery. 3) It took 2700d packing weft 30min to get approximately 98% recovery in temperature $30^{\circ}C$. But, 3600d packing weft stayed under 98% recovery in the same temperature. Considering only the result of compressive elastic recovery, we should use 2700d packing weft. 4) The higher the density of packing weft is, the higher warmth retaining becomes. Although sharp increase appeared until 5min, equilibrium was kept without any increase after that time. 5) When 2700d packing weft was used, the maximum warmth retaining was approximately 60% and 64% in the conditions of density 12(thread/in) and 22(thread/in) respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.9 no.1
• /
• pp.17-27
• /
• 1985

In order to investigate the warmth retaining properties of fabrics some characteristics such as thickness. porosity, packing density, thermal conductivity, moisture regain and air permeability were measured and experimental results were analysed statistically to relate the warmth retaining properties with those characteristics. From the analysis, the following results were obtained. 1. When the warmth retaining properties of fabrics (Y) are dependent variable and thickness ($x_1$), porosity ($x_2$), packing density ($x_3$), thermal conductivity ($x_4$), moisture regain ($x_5$) and air permeability ($x_6$) are independent variables, the regression equation of warmth retaining properties can be represented as follows. 1) Y= 1.6005+46.817$x_1$, (R=0.9487) 2)Y=-1.4187+26.5072$x_1$+0.2055$x_2$(R=0.9704) 3) Y= -3.6908+17.4482$x_1$+0.1782$x_2$+28.3243$x_3$ (R=0.9756) 4) Y=0.9202+16.9553$x_1$+0. 1167$x_2$+30.3577$x_3$+1.8884$x_4$ (R=0.9792) 5) Y=0.9353+17.2266$x_1$+0.1177$x_2$+28.9821$x_3$-1.8302$x_4$+0.0151$x_5$ (R=0.9792) 6) Y=0.7583+17.2343$x_1$+0.1196$x_2$+28.8830$x_3$-1.8336$x_4$+0.0187$x_5$0.0004$x_5$ (R=0.9792) 2. The warmth retaining properties of fabrics are merely affected by adding thermal conductivity, moisture regain and multiple regression equation which contains thickness, porosity and packing density as variables. Therefore the multiple regression which contains thickness, porosity and packing density as variables Y=-3.6908+17.4482$x_1$+0.1782$x_2$+28.3243$x_3$ is highly practical.

• Fashion & Textile Research Journal
• /
• v.2 no.2
• /
• pp.132-137
• /
• 2000

This study was carried out to evaluate the distribution of mechanical and thermal properties of 14 sorts of tencel fabrics. Three kinds of cellulosic fabrics such as cotton 100%, cotton/tencel 50/50% and rayon 100% were used to compare with tencel fabrics. Furthermore, for the comparison of thermal properties, these fabrics were repeatedly washed 1, 3, 5, 10, 15 and 20 times respectively. The mechanical properties were measured by the KES-FB system and Thereto Labo II type was employed to measure the thermal properties of warmth retaining and contact warm/cool feeling($q_{max}$). The experimental results were analysed statistically to relate the mechanical and thermal properties. Tencel showed sufficient ability to recover from bending deformation and drapability comparing with other cellulosic fabrics and had a silhouette which goes along with the body.

• Hwankyungkyoyuk
• /
• v.19 no.2 s.30
• /
• pp.122-132
• /
• 2006

This research compared the mechanism of the greenhouse effect in the atmosphere with retaining warmth in the actual greenhouse, analyzed the styles of explaining the greenhouse effect in current textbooks, and investigated teachers' and students' degrees of understanding the effect. The mechanisms of the actual greenhouse and the greenhouse effect are not the same. Nevertheless, in all the current textbooks, the radiation phenomenon by the atmosphere is described as the 'greenhouse effect'. Using the words of the 'greenhouse effect' to refer to the effect of air being kept warm by the heat absorbing gases, causes confusion of concepts. To make learners understand the greenhouse effect exactly, concrete principles such as radiating electromagnetic phenomenon should be explained. However, teachers and current textbooks explained the radiating electromagnetic phenomenon as actual greenhouse. Therefore, it is difficult for learners to understand the greenhouse effect, scientifically. Because of this, learners maybe confused about greenhouse effect concepts.

• Fashion & Textile Research Journal
• /
• v.1 no.3
• /
• pp.259-263
• /
• 1999

This study was carried out to investigate the changes of thermal properties such as warmth retaining and contact warm/cool feeling of commercial dress shirts by repeated washing and drying by sun and dryer. Three kinds of fabrics such as cotton 100%, cotton/polyester 80/20% and polyester 100% were repeatedly washed and dried, and then used as specimen. Thermo Labo II type was employed to measure the thermal properties. At the same time, structural properties such as thickness, weight, bulk density, porosity, moisture vapor permeability and air permeability were analysed.

• Journal of Fashion Business
• /
• v.2 no.4
• /
• pp.93-101
• /
• 1998

Knit products which had been limited only to underwear, recently became popularized, fashionized and highly classified covering even outer garments such as sportswear like golfwear, woman's dress, and man' s suit. As fashion cycle is getting shorter and the more a nation advanced prefers knit to woven fabrics knit industry has a very bright prospect, particularly woman's knit which is sensitive to fashion can be said as a fashion product with high value added. This study is to grasp the physical properties of stitch which are fundamental to the development of knit products. For this purpose, 2/20s of 100% wool were woven by the author of this study to basic plain stitch, rib stitch, varied transfer stitch, and float stitch on a SEMASEIKI cross knitter 7G to test the physical properties, and the result was as follows; 1. As for the relation between knit stitch and rate of extension recovery, rate of extension recovery was higher in the course direction than in the wale direction of three stitches except transfer stitch; rib stitch showed the highest rate of extension recovery in the course direction while float stitch showed the highest rate of extension recovery in the wale direction. 2. As for the relation between knit stitch and bursting strength elastic rib stitch showed higher bursting strength to indicate elasticity is an important factor of bursting strength and float stitch showed higher bursting strength too to indicate that the floating yarn on the surface plays a role of support. 3. As for the relation between knit stitch and air permeability perforated transfer stitch showed the lowest air permeability to prove that the size of perforation affects on the air permeability a great deal. 4. As for the relation between knit stitch and warmth retaining rib stitch through two lined needle bar showed the highest degree. The reason the warmth of perforated transfer stitch didn't decrease much was because the perforation wasn't big enough and content of air increased from the unevenness of the perforated parts through stitch variation. Based upon this result, each stitch can be characteristically summarized as follows; plain stitch showed a stable condition of knit cloth in four kinds of physical property test. And rib stitch is proper to tighten the edge of sleeve or clothe making use of its excellent extension recovery and to make socks for the highest bursting strength and warmth retaining. In the case of transfer stitch, seasonable designs can be taken by controlling the size of loop. Considering the pleasantness, underwear should be made of stitches with good air permeability float stitch was revealed to have color and pattern effects and a great bursting strength. This study has limitations in the aspect that it dealed with a small part of various knit stitches and the items of physical property test were not enough. The author of this study hopes that further studies would make deeper understandings about knit stitch based on more varied stitches and physical property tests ultimately to contribute to the development of fashionable designs proper to maximize the usage, function and originality.

• The Research Journal of the Costume Culture
• /
• v.2 no.2
• /
• pp.385-394
• /
• 1994

Data of the body surface is a necessary unit for the measuring of metabolism energy and activity energy. And also, these data are referring to check the degree of retaining warmth of clothes, to find the effect of heat insulation according to body surface, to calculate an average temperature of skin, and to study the several fields of clothing. In measuring of body surface, it si actually impossible to measure a subject's body surface in each experiment. As the experimental method, both gypsum method, by which the shape of body an be copied as it is, and the weighting method from which planed body surface area can be measured with consistent thickness of polyprophylene film as used. In fact, every female subject feels uncomfortable to measure her body surface as a naked body. There, it is providing a simple, accurate regressive equation with weight & height as variable factors in this study. This equation is as=117.02W+77.31H-3344.94 with average error : 0.1%, absolute average error : 2.07%.

• Journal of the Korean Home Economics Association
• /
• v.26 no.2
• /
• pp.69-79
• /
• 1988

This study was to increase the experimental learning effect of textile materials in middle and high school. To this study, three kinds of simply devised apparatus were used for warmth retaining test, air permeability test and static electricity test. Two classes were chosen in a girls' high school comparing learning effect and classified the theoretical learning group and the experimental learning group. In the experimental group, a teaching plan to teach the properties of textile materials was made to use these apparatuses. The results were. 1. In the interest on the unit either the theoretical learning group or the experimental learning group were not different significantly. 2. In the items facilitation of motivation, unsatisfied desires and prevention of failure, effect of transfer and development of inquiry power, both groups were significant. 3. For the purpose of comparing the learning effect, two groups were examined for determining the level of understanding after teaching properties of textile materials. The mean value of the experimental learning group was higher than that of the theoretical learning group. The experimental learning group had more higher markers(over the point of 90) than the theoretical learning group.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.3
• /
• pp.470-474
• /
• 1993

This study carried out to get some fundamental data for designing lightweight bedding. In This study, the wool blanket, polyester/cotton blended blanket and down quilt were manufactured with a varied materials, structural factors such as yam count, fabric density respectivelyarn. And also, the thermal insulation value of the bedding were measured by warmth retaining tester. In addition, this paper examines the influence of varying materials, structural factors and blanket layers on the thermal insulation effect of the bedding. The main results obtained from this study are as follow : 1. The design of lightweight blankets make an attempting with a varying materials and structural factors such as yam count, fabric densityarn. 2. Almost, the design of lightweight blankets for polyester/cotton blended blanket and down quilt make an attempting without reduction in thermal insulation values. 3. The 6 layers of blanket have less thermal insulation value than the 6 times of blanket for under a layer have. About 27~32% decrease is observed in thermal insulation value of blanket for under 6 layer. 4. The thermal insulation value and areal weight of blankets have a positive relation between the thermal insulation value(Y) and areal weight(X) is based on the following equation. wool blanket : Y = 1.0850X + 0.4188 (r = 0.9992) PIC blended blanket : Y = 0.8845X + 0.3034 (r = 0.9999)