• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.5
• /
• pp.691-697
• /
• 2011

In this study, by using the Water footprint technique, the water consumption by washing machines, which holds higher ranks in using water than any other electric appliances, was analyzed during their life cycle. The life cycle is defined as raw materials production step, manufacturing step, and using step. In raw materials production step, Input materials were researched by using LCI DB(Life Cycle Inventory Database) and the water consumption was calculated with consideration of approximately 65% Input materials which were based weight. In manufacturing step, the water consumption was calculated by the amount of energy used in assembly factories and components subcontractors and emission factor of energy. In using step, referring to guidelines on carbon footprint labeling, the life cycle is applied as 5 years for a washing machine and 218 cycles for annual bounds of usage. The water and power consumption for operating was calculated by referring to posted materials on the manufacture's websites. The water consumption by nation unit was calculated with the result of water consumption by a unit of washing machine. As a result, it shows that water consumption per life cycle s 110,105 kg/unit. The water consumption of each step is 90,495 kg/unit for using, 18,603 kg for raw materials production and 1,006 kg/unit for manufacturing, which apparently shows that the using step consume the most water resource. The water consumption by nation unit is 371,269,584tons in total based on 2006, 83,385,649 tons in both steps of raw material production and manufacturing, and 287,883,935 tons in using step.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.12 no.1
• /
• pp.5-24
• /
• 2001

This study was focused on the sanitary analysis of hazard factors and the establishment of critical control points on steak-set menu In hotel by the documents and microbiological investigation. The hazard factors of shrimp cocktail were microbial contamination, residual pesticides, unsuitable healing and cross contamination. The hazard factors of potato soap were residual pesticides, microorganisms contamination, unsuitable heating and solanine in potato. The hazard factors of simple salad were microorganisms contamination, unsuitable heating and cross contamination by inappropriate package. The hazard factors of steal were residual antimicrobial drugs, microorganisms contamination, unsuitable heating and cross contamination. The critical control points of shrimp cocktail were temperature control , number of washing and center temperature control of heating step. The critical control points of potato soup were stock temperature control , number of washing and center temperature control of Heating step. The critical control points of simple salad were number of washing and dryness of utensil. The critical control points of steak were stock temperature control , number of washing, center temperature and time control of heating step.

• Food Science and Biotechnology
• /
• v.18 no.5
• /
• pp.1076-1082
• /
• 2009

Six pesticides were determined in hot pepper leaves after successive processing steps of washing, blanching, and drying. The tested pesticides included dichlofluanid, flusilazole, folpet, iprodione, ${\lambda}$-cyhalothrin, and lufenuron. Each pesticide was singly applied to the leaves of the pepper plants, which were being cultivated in a greenhouse. The processing factors were dependent on the type of pesticide, and were in the following ranges: 0.09-0.73 by washing, <0.00-0.48 after blanching, and <0.00-3.30 after drying. Only lufenuron showed a processing factor of more than 1, at 3.30 in dried leaves, while the processing factors of the other pesticides were less than 1. The removal ratios of the tested pesticides by washing ranged from 27 to 90%. The blanching step increased their removals by 10-25%. However, drying did not have an effect on residue reduction. Finally, after proceeding to the drying step, removal ratios ranged from 85 to 100%, with the exception of lufenuron at 47%.

• Journal of Animal Science and Technology
• /
• v.62 no.1
• /
• pp.58-63
• /
• 2020

The pre-treatment condition affects on the element analysis of inductively coupled plasma (ICP). In this study the pre-treatment condition of ICP has been studied to quantify elements in dog's hair. The hair samples were collected from twelve female Beagles by clipping them into 1 or 2 cm at the back neck. The qualitative and quantitative analysis of elements in hairs were performed by using ICP. By ICP nine elements were qualitatively detected and quantitatively analyzed (Ca, Cu, Fe, K, Mg, Na, P, Se, Zn). The measured amounts of elements were compared between 3 step and 2 step procedures which were with and without the acetone based washing step. The quantitative analysis showed that the concentrations of K, Na, P, and Se were significantly decreased in hair samples with acetone-based washing (p < 0.005 or 0.001) unlike those without the acetone-based washing. It implied that some minerals are lost by the acetone based washing during the sample preparation step. Therefore, the acetone based washing process is not suitable for quantifying elements in dog's hair. In addition, the results of qualitative and quantitative analysis were compared. Although there was a difference in absolute values of elemental contents in hair, the results of qualitative and quantitative analysis were significantly correlated each other. This finding suggested that the results of qualitative analysis can be used to monitor elemental contents in dog's hair.

• Journal of Life Science
• /
• v.22 no.4
• /
• pp.565-568
• /
• 2012

There are various kinds of cereals used in sunsik manufacturing. Different harmful microorganisms that can contaminate these cereals have been reported. According to the different sizes of cereals used, black bean, black rice, and millet were artificially contaminated with Escherichia $Coli.$ $E.$ $coli$ contamination in cereal samples was detected after different washing steps under different conditions. The increase of washing time did not have any effect with regard to reducing $E.$ $coli$ in samples. Among several ratios between the washing solution and sample, 2:1 that have little influence to reduce $E.$ $coli$ contamination have been determined. The temperature of the washing solution is an influencing factor as well. Washing with solution at $40^{\circ}C$ could reduce 1 log of $E.$ $coli$ in samples. Among different concentrations of saline used as a washing solution, 5% could reduce 2~3 log $E.$ $coli$ in contaminated samples. However, the saline adds a salty taste to cereals when used during the washing step. To remove that, an extra washing step and large amount of washing solution are necessary in sunsik manufacturing.

• Journal of the Korean Home Economics Association
• /
• v.37 no.2
• /
• pp.113-126
• /
• 1999

In order to investigate the detergency effect of stained cotton and PET fabric, respectively, these fabrics stained with solid soils such as carbon black, liquid paraffin, and fat and examined the detergency effect in the optimum washing condition. The evaluation of washing efficiency of washed fabrics studied by using the surface reflectance measurement before and after washing treatment. The maximum detergency effect of stained cotton and PET fabric obtained in the mixed washing liquor-bleachig agen(ml)/concentrated washig agent(g/l). To obtain the excellent detergency effect, 2-step washing treatment, pre-washing by bleaching agent only and washing by concentrated detergent, is preferred. In comparing the detergency of polyester and cotton fabric, the detergency of stained polyester fabric superior than that of stained cotton fabric because of the difference of adhesive force between soil material and fabric in preparing soled stained fabric. In this study, we also studied the degree of fabric damage by the measurement of tensile strength change. From the results of the tensile strength measurement, the damage of washed fabric before and after washing treatment was nearly changed.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.571-573
• /
• 2008

Conventional drum washing machine is divided by amount of laundry on 3 step. Because that, this method is arisen in case of washing smaller amount of laundry than each weight during same time. In other words, power is wasted by unnecessary washing time. In this paper, exact quantity of laundry is obtained by using inertia estimator considering features of drum washing machine, unnecessary washing time is decreased by selection proper washing time, thus the algorithm that increase efficiency by reducing power consumption is proposed.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.148-151
• /
• 2003

Soil washing was applied as a supplementary step of soil remediation at a petroleum oil contaminated site. A soil washing system was designed, assembled, and operated at the site. A field screening method with PetroFlagTM was adopted at the site to find the exact boundary of contaminated area as soil excavation progressed and to verify the concentration of treated soil. The system operation showed the cleanup efficiency of 90% at the compatible cost compared to other methods.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.85-109
• /
• 2023

Laundry has traditionally been regarded as one of the most demanding household chores, but the introduction of smart washing machines is changing this perception. Although smart washing machines have been on the market for several years and consumers' perceptions of washing machines have changed, little is known about consumers' perceptions of smart washing machines. The purpose of this study is to determine what users expect from smart washing machines. We conducted two focus group interviews with sixteen participants who had used smart home appliances to acquire qualitative data. Stimuli created by the interviewees were applied in the focus group interviews to collect more insightful data. We analyzed the data using the three-step method and QSR NVivo. Analysis revealed ten categories of predictive expectations, including seven utilitarian attributes (i.e., smart functionality, smart user interface, reliability, controllability, interactivity, functional value, and economic value) and three hedonic attributes (i.e., fashionable value, psychological value, and social value). The results of this study have implications for the development of smart washing machines that would satisfy consumers by taking user expectations into account.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.5
• /
• pp.612-617
• /
• 2009

Fresh vegetable juice is a non-heat treated product and the only step to reduce microbial growth is washing. Therefore, the materials for fresh vegetable juice including Angelica keiskei, Brassica loeracea var. acephala, and Daucus carota L. were treated by ozone after the first washing process and investigated for microbial and chemical changes. The number of the total aerobic bacteria in materials after selection step were $8.2{\times}10^5{\sim}5.0{\times}10^6\;CFU/g$, which was a higher contamination level than the limit of Korea food code ($10^5\;CFU/g$). However, after the 1st washing process and ozone treatment, the total aerobic bacterial number was reduced to $4.7{\times}10^4{\sim}6.7{\times}10^4\;CFU/g$, which showed 2 log microbial reduction. After the 2nd washing step followed by ozone treatment, there was no difference in microbial number. The number of colifroms in the materials of fresh vegetable juice were $8.0{\times}10^3{\sim}3.5{\times}10^3\;CFU/g$ initially but showed $1.5{\times}10^2{\sim}3.0{\times}10^2\;CFU/g$ after the ozone treatment (1 log reduction). On the other hand, there was no changes in the contents of ascorbic acid, flavonoids, polyphenols, minerals (cadmium and lead) during all processes. In addition, no color changes were observed during washing process. Therefore, ozone treatment in the materials of fresh vegetable juice decreased the microbial numbers. Also, chemical characteristics of ozone treated sample were not different when compared with control.