• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.106-107
• /
• 2005

Small vessels of less then 20 tonnage and leisure boats such as motor boats, sailing yachts, water motorcycle, etc have been excluded from the rules and regulations such as Marine Leisure Safety Act, Ship Act and Ship Safety Act for a long time in Korea. As a result, these small vessels and leisure boats have remained within the blind area of maritime safety and environment protection. Among these vessels and boats, some leisure boats such as motor boats of 20 horse power or more(excluding motor boats equipped with engine inside the vehicles), water motorcycles and rubber boats of 30 horse power or more are incorporated into the Marine Leisure Safety Act through the registry, safety inspection, insurance early 2005 in Korea. In relation to the scope of application of the national Acts concerned, I consider the conflicts between Acts and suggest the subordinate enforcement ordinance and regulations.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.111-124
• /
• 2005

Small vessels of less then 20 tonnage and leisure boots such as motor boots, sailing yachts, water motorcycle, etc have been excluded from the rules and regulations such as Marine Leisure Safety Act, Ship Act and Ship Safety Act for a long time in Korea As a result, these small vessels and leisure boots have remained within the blind area of maritime safety and environment protection Among these vessels and boots, some leisure boots such as motor boots of 20 horse power or more(excluding motor boots equipped with engine inside the vehicles), water motorcycles and robber boots of 30 horse power or more are incorporated into the Marine Leisure Safety Act through the registry, safety inspection, insurance early 2005 in Korea In relation to the scope of application of the national Acts concerned, I consider the conflicts between Acts and suggest the subordinate enforcement ordinance and regulations.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.589-592
• /
• 2002

A commercial CFD code is applied to analyze the 3-D viscous flow field within vertical multi-stage centrifugal pump including impeller of centrifugal pump with 6 blades and guide vain with 11 blades. The numerical analysis of vertical multi-stage centrifugal pump is performed by changing flow rate from $8\;to\;26\;m^{3}/h$ at the constant 3500rpm. The characteristics such as total pressure coefficient, total head, water horse power, power efficiency are represented according to flow rate changing. In the future, we will need to perform flow calculation of vertical multi-stage centrifugal pump by considering meridional shape of impeller.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.42-47
• /
• 2016

This paper presents the development of a floating outboard type of compact water jet propulsion system. The planning case of the water jet system is developed by performing precision processing after manufacturing FRP (Fiber Reinforced Plastics) from plug mold casting. This system is composed of an intake, impeller, diffuser, reverse bucket, and main shaft. In addition, a rebuilt engine was applied through marine engineering. The water jet propulsion system performance was verified to discharge a maximum $0.29m^3/s$ of flow rate and 37 m/s of flow velocity in a test pool on land. A field test was performed by installing the water jet propulsion device on board a ship that was tested off the coast of Korea. The weight of the hull, engine, and other equipment was approximately 1.2 tons, and the sailing speed was a maximum 22 knots at 3,600 rpm.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.13 no.2
• /
• pp.1-4
• /
• 1977

The author determined the relationship between the hauling veloicty and the hydrodynamic resistance of the sablefish pot shaped conic frustum like, and induced the formulae to determine the diameter of the main line and the net horse power of the pot hauler. The results are summarized as follows: 1. The maximum hydrodynamic resistance (with its weight in water) of the pot T(kg), when the bottom webbing is covered by a cloth to imitate the catches are scattered on the bottom, is eatimated as $$ T=120v^{1.1} (0.3{\leqq}v{\leqq}0.8) $$ where v denotes the hauling velocity of the pot in m/sec. 2. When P. P. 3 strand rope is used as main line, the diameter d(mm)is recommended to satisfy the formula $$ d=72 \frac{D}{H} V^{1.1} where H denotes the depth of the fishing ground and D the intervals of the pots linked to the main in m respectively. 3. The pot hauler must displace the net horse power p(ps) of $$ P= \frac{75}{120} \frac{D}{H} v^{2.1}$$

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.630-631
• /
• 2009

Recent developments such as concern over global warming, depletion of fossil fuels and increase in energy demands by the increasing world population has eventually lead to mass production of electricity using renewable sources. Apart from wind and solar, ocean holds tremendous amount of untapped energy in forms such as geothermal vents, tides and waves. The current study looks at generating power using waves and the focus is on the primary energy conversion (first stage conversion) of incoming waves for two different models. Observation of flow characteristics, pressure and the velocity in the augmentation channel as well as the front guide nozzle are presented in the paper. A numerical wave tank was utilized to generate waves of desired properties and later the turbine section was integrated. The augmentation channel consisted of a front nozzle, rear nozzle and an internal fluid region representing the turbine housing. The analysis was performed using the commercial CFD code.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.594-599
• /
• 2009

Recent developments such as concern over global warming, depletion of fossil fuels and increase in energy demands by the increasing world population has eventually lead to mass production of electricity using renewable sources. Apart from wind and solar, ocean holds tremendous amount of untapped energy in forms such as geothermal vents, tides and waves. The current study looks at generating power using waves and the focus is on the primary energy conversion (first stage conversion) of incoming waves for different models. Observation of flow characteristics and the velocity in the augmentation channel as well as the front guide nozzle are presented in the paper. A numerical wave tank was used to simulate the waves and after obtaining the desired wave properties; the augmentation channel plus the front guide nozzle and rear chamber were integrated to the numerical wave tank. The waves in the numerical wave tank were generated by a piston type wave maker which was located at the wave tank inlet. The inlet which was modeled as a plate wall moved sinusoidally with the general function, x=asin$\omega$t The augmentation channel consisted of a front nozzle, rear nozzle and an internal fluid region representing the turbine housing. The analysis was performed using the commercial CFD code ANSYS-CFX.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.632-640
• /
• 2019

Desalination plant ships have been recently regarded as one of the probable solutions for drought seasons in many countries. Because desalination plants should be mounted on the desalination ships and special purpose storages such as salty waste water tanks are necessary, onboard and compartment arrangements would be distinguished from those of other conventional commercial ships. This paper introduces some basic design procedure including resistance/propulsion and seakeeping performances. The ship lines were improved step by step after modification of the ship lines and verification of resistance/propulsion performances using computational fluid dynamics (CFD). After finalization of the ship lines, the seakeeping performance was also evaluated to check motion behaviors and drive wave-induced loads such as the wave shear force and bending moment. It was proved that the predicted long-term vertical wave shear force and bending moment were significantly less than the rule-based ones, thus it is expected that the deliverables of this study will reduce the construction cost of desalination plant ships.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.5
• /
• pp.12-17
• /
• 2011

The seawater lift pump system is responsible for maintaining the open canal level to provide the suction flow of circulating water pump at the set point. The objective of this paper is to design a 2-stage mixed flow pump (for seawater lifting) by inverse design method and to evaluate the overall performance and the local flow fields of the pump by using a commercial CFD code. Rotating speed of the impeller is 1,750 rpm with the flow rate of 2,700 $m^3$/h. Finite volume method with structured mesh and realized k-${\varepsilon}$ turbulent model is used to guaranty more accurate prediction of turbulent flow in the pump impeller. The numerical results such as static head, brake horse power and efficiency of the mixed flow pump are compared with the design data. The simulated results are good agreement with the design data less 3% error.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.556-560
• /
• 2011

The seawater lift pump system is responsible for maintaining the open canal level to provide the suction flow of circulating water pump at the set point. The objective of this paper is to design a 2-stage mixed flow pump(for seawater lifting) by inverse design and to evaluate the overall performance and the local flow fields of the pump by using a commercial CFD code. Rotating speed of the impeller is 1,750 rpm with the flow rate of 2,700 $m^3/h$. Finite volume method with structured mesh and Realizable ${\kappa}-{\varepsilon}$ turbulent model is used to guaranty more accurate prediction of turbulent flow in the pump impeller. The numerical results such as static head brake horse power and efficiency of the mixed flow pump are compared with the reference data. Also, the periodic condition calculation method for the mixed flow pump was carried out in order to investigate the pump performance characteristics with the modification of impeller geometry.