• Membrane and Water Treatment
• /
• v.13 no.4
• /
• pp.201-208
• /
• 2022

Emulsion Liquid Membrane (ELM) is a prominent technique for the separation of heavy metal ions from wastewater due to the fast extraction and is a single-stage operation of stripping-extraction. The selection of the components (Surfactant and Carrier) of ELM is a very significant step for its preparation. In the ELM technique, the primary water- in-oil (W/O) emulsion is emulsified in water to produce water-in-oil-in-water (W/O/W) emulsion. The water in oil emulsion was prepared by mixing the membrane phase and internal phase. To prepare the membrane phase, the extractant D2EHPA (di-2-ethylhexylphosphoric acid) was used as a mobile carrier, Span-80 as a surfactant, and Paraffin as a diluent. Moreover, the internal (receiving) phase was prepared by dissolving sulphuric acid in water. Di-(2- ethylhexyl) phosphoric acid such as surfactant concentration, carrier concentration, sulphuric acid concentration in the receiving (internal) phase, agitation time (emulsion phase and feed phase), the volume ratio of the membrane phase to the receiving phase, the volume ratio of the external feed phase to the primary water-in-oil emulsion and pH of feed were studied on the percentage extraction of metal ions at 20℃. The results show that it is possible to remove 78% for As(V), 98% for Cd(II), and 99% for Pb(II). Emulsion Liquid Membrane (ELM) is a well-known technique for separating heavy metal ions from wastewater due to the fast extraction and is a single-stage operation of stripping-extraction. The selection of ELM components (Surfactant and Carrier) is a very significant step in its preparation. In the ELM technique, the primary water-in-oil (W/O) emulsion is emulsified to produce water-in-oil-in-water (W/O/W) emulsion. The water in the oil emulsion was prepared by mixing the membrane and internal phases. The extractant D2EHPA (di-2-ethylhexylphosphoric acid) was used as a mobile carrier, Span-80 as a surfactant, and Paraffin as a diluent. Moreover, the internal (receiving) phase was prepared by dissolving sulphuric acid in water. Di-(2-ethylhexyl) phosphoric acid such as surfactant concentration, carrier concentration, sulphuric acid concentration in the receiving (internal) phase, agitation time (emulsion phase and feed phase), the volume ratio of the membrane phase to the receiving phase, the volume ratio of the external feed phase to the primary water-in-oil emulsion and pH of feed were studied on the percentage extraction of metal ions at 20℃. The results show that it is possible to remove 78% for As(V), 98% for Cd(II), and 99% for Pb(II).

• Korea-Australia Rheology Journal
• /
• v.15 no.3
• /
• pp.125-130
• /
• 2003

The emulsion stability of cosmetic creams based on the water-in-oil (W/O) high internal phase emulsions (HIPEs) containing water, squalane oil and cetyl dimethicone copolyol was investigated with various compositional changes, such as electrolyte concentration, oil polarity and water phase volume fraction. The rheological consistency was mainly destroyed by the coalescence of the deformed water droplets. The slope change of complex modulus versus water phase volume fraction monitored in the linear viscoelastic region could be explained with the resistance to coalescence of the deformed interfacial film of water droplets in concentrated W/O emulsions: the greater the increase of complex modulus was, the more the coalescence occurred and the less consistent the emulsions were. Emulsion stability was dependent on the addition of electrolyte to the water phase. Increasing the electrolyte concentration increased the refractive index of the water phase, and thus decreased the refractive index difference between oil and water phases. This decreased the attractive force between water droplets, which resulted in reducing the coalescence of droplets and increasing the stability of emulsions. Increasing the oil polarity tended to increase emulsion consistency, but did not show clear difference in cream hardness among the emulsions.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.836-847
• /
• 2016

Water soluble oil was obtained by pyrolysis of biomass. The characteristics of emulsified fuel by mixing water soluble oil and MDO(marine diesel oil) and engine emissions were studied with engine dynamometer. Saw dust was used as biomass. Water soluble oil was obtained by condensing of water and carbon content with pyrolysis of saw dust at $500^{\circ}C$. Emulsion fuel was obtained by emulsifying MDO and water soluble oil by the water soluble oil mixing ratio of 10 to 20% of MDO. Exhaust gas detection was performed with engine dynamometer. While combustion, micro-explosion took place in the combustion chamber by water in the emulsion fuel, emulsion fuel scattered to micro particles and it caused to smoke reduction. The heat produced from water vapour reduce the temperature of internal combustion chamber and it caused to inhibition of NOx production. It can be verified by the lower exhaust temperature of each ND-13 mode using emulsion fuel than that of MDO fuel. The NOx and smoke concentration were reduced by increasing water soluble oil content in the emulsion fuel. The power also decreased according to the increment of water soluble oil content of emulsion fuel because emulsion fuel has low calorific value due to high water content than MDO. As a result of ND-13 mode test with 20% bio oil content, it was achieved 25% reduction in NOx production, 60% reduction in smoke density, and 15% reduction in power loss.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.88-92
• /
• 2006

This study is intended to check the flame temperature to raise in burning grade C heavy fuel oil and emulsion fuel oil in a boiler and to measure the concentration of Dry Shoot(DS) and Soluble Organic Fraction(SOF) after collecting the Particulate Matters (PM). The flames temperature in boiler was measured by burning grade C heavy oil and oil-water emulsion (C heavy oil $70\%\;and\;30\%$ of water) Combustion characteristics of two fuels was also compared by trapping particulate matters (PM) in exhaust gas and measuring the generated quantities of DS and SOF in fuel gas.

• Korean journal of food and cookery science
• /
• v.33 no.1
• /
• pp.113-120
• /
• 2017

Purpose: Lipid autoxidation of a soybean oil-in-water emulsion with high oil content was studied under after basil extract and/or iron addition. Methods: The emulsion consisted of tocopherol-stripped soybean oil (40 g), citrate buffer (60 g, pH 4.0), and/or $FeSO_4$ (0.5 mg) with 75% ethanol extract (200 mg/kg) of basil (Ocimum basilicum). Lipid oxidation was evaluated using headspace oxygen content, hydroperoxide contents, and p-anisidne values of the emulsion. Polyphenol compound retention in the emulsion during oxidation was determined spectrophotometrically. Results: Addition of basil extract significantly (p<0.05) decreased reduced hydroperoxide contents of the emulsion, and iron significantly (p<0.05) increased anisidine values and decreased oxygen contents. Co-addition of basil extract and iron showed significantly (p<0.05) lower reduced hydroperoxide contents in the emulsion than compared to those of the emulsion with added iron and the control emulsion without basil extract nor or iron. During the emulsion oxidation, polyphenol compounds in the emulsion with added basil extract were degraded, but more slowlywhich was slowed degraded in the presence of iron. Conclusion: The iIron increased the lipid oxidation through hydroperoxide decomposition, and basil extract showed antioxidant activity through radical-scavenging and iron-chelation. Polyphenol degradation was decelerated by iron addition, which suggested suggests iron chelation may be more preferred topreferentially activated over radical scavenging in the antioxidant action by of basil extract in the oil-in-water emulsion with high oil content.

• Food Science of Animal Resources
• /
• v.38 no.3
• /
• pp.580-592
• /
• 2018

The formulation of an oil/water (o/w) emulsion made up of a mixture of perilla oil and canola oil (30/70 w/w) was optimized using a response surface methodology to find a replacement for animal fat in an emulsion-type meat product. A 12 run Plackett-Burman design (PBD) was applied to screen the effect of potential ingredients in the (o/w) emulsion, including polyglycerol polyricinoleate (PGPR), fish gelatin, soy protein isolate (SPI), sodium caseinate, carrageenan (CR), inulin (IN) and sodium tripolyphosphate. The PBD showed that SPI, CR and IN showed promise but required further optimization, and other ingredients did not affect the technological properties of the (o/w) emulsion. The PBD also showed that PGPR played a critical role in inhibiting an emulsion break. The level of PGPR was then fixed at 3.2% (w/w total emulsion) for an optimization study. A central composite design (CCD) was applied to optimize the addition levels of SPI, CR or IN in an (o/w) emulsion and to observe their effects on emulsion stability, cooking loss and the textural properties of a cooked meat emulsion. Significant interactions between SPI and CR increased the cooking loss in the meat emulsion. In contrast, IN showed interactions with SPI leading to a reduction in cooking loss. Thus, CR was also removed from the formulation. After optimization, the level of SPI (4.48% w/w) and IN (14% w/w) was validated, leading to a perilla-canola oil (o/w) emulsion with the ability to replace animal fat in an emulsion-type meat products.

• Korean Journal of Agricultural Science
• /
• v.43 no.2
• /
• pp.249-257
• /
• 2016

In this study, rapeseed extracts were obtained by supercritical carbon dioxide fluid extraction of defatted rapeseed to evaluate the stability and antioxidant activity of an oil-in-water (O/W) emulsion system. The oil-in-water emulsions were prepared from stripped soybean oil with different concentrations (0.3, 0.4, 0.5, and 0.6%) of rapeseed extract as an emulsifier. Their emulsion stability was compared to that of emulsions prepared with the commercial emulsifier, Tween 20 (Polysorbate 20, 0.2%). After stripping the soybean oil, the total tocopherol content was reduced from 51.4 g/100 g to 1.1 g/100 g. Emulsion stability and oxidative stability of emulsions prepared with Tween 20 and rapeseed extract as emulsifiers were evaluated. For 30 days droplet sizes of emulsions containing rapeseed extract (0.4, 0.5, and 0.6%) were not significantly different (p > 0.05). Similar results were obtained for emulsion stability (ES) and Turbiscan analysis, suggesting that the addition of rapeseed extract increased emulsion stability. The addition of rapeseed extract at more than 0.4% resulted in an emulsion stability comparable to the addition of 0.2% Tween 20. The antioxidative ability of rapeseed extract increased with the amount added in the emulsion. Moreover, the addition of 0.6% rapeseed extract resulted in the lowest emulsion peroxide values (10.3 mEq/L) among all treatments. Therefore, according to the stability of its antioxidative and physical stability properties, rapeseed extract from super critical extraction could be successfully applied to the food and cosmetic industries.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.1
• /
• pp.1-16
• /
• 2010

The preparation and properties of emulsions stabilized by the adsorption of solid particles at the oil-water interface are reviewed. Comparison is made with the behaviour of surfactant-stabilized emulsions. Many of the properties of Pickering emulsions are attributed to the large free energy of adsorption for particles. The main differences is due to the irreversible adsorption of particles to the interface. Phase inversion from w/o (water-in-oil) to o/w (oil-in-water) can be brought by increasing the volume fraction of water. Hydrophilic particles tend to form o/w emulsion whereas hydrophobic particles form w/o emulsion. The contact angle at the oil-water interface is main parameter to decide the emulsion type. The aspects of stability of Pickering emulsions are in contrast to general emulsions in some points. The possibility using Pickering emulsions for cosmetics is also proposed.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.111-115
• /
• 1998

We investigated the stability of all-trans-retinol on the liquid crystalline O/W emulsion composed of mainly alkyl polyglycerine, alkyl polyglucose and glycerine, and compared the activity of all-trans-retinol in the various forms of liquid crystal. Under certain conditions, novel liquid crystalline gel was formed around oil droplets, and layers of this liquid crystalline gel were very wide and rigid. (SWLC; Super Wide Liquid Crystal) SWLC was very helpful to stabilize retinol in O/W emulsion. After storage at 45 C for 4 weeks, all-trans-retinol in O/W emulsion composed of SWLC retained above 85% of the activity upon HPLC analysis, whereas those within no liquid crystalline emulsion gave 47% and normal liquid crystalline emulsion composed of fatty alcohols gave 40 60%. Retinol in oil phase is nealy insoluble in pure water, but in cosmetic emulsion systems can be slightly solubilized into water because emulsifiers and polyols in emulsion systems function as solubilizers. In this case, water in outer phase acts as a media for oxygen transporation$.$and thus destabilizes retinol. As a result, retinol in O/W emulsion has a tendency to become unstable. SWLC surrounding oil droplet which contains retinol is wide and rigid, therefore reduces contact between inner phase and outer phase To make SWLC, properties of emulsifiers are very important phase transition temperature should be high, and the structure of surfactants should be bulky, and their ratio should be suitable to make rigid and wide liquid crystalline gel layer in order to reduce contact between retinol in inner phase and water in outer phase.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.3
• /
• pp.19-30
• /
• 1993

The influence of emulsion type of tegafur, an oral anticancer agent, on lymphatic transport was studied in rats. The water-in-oil-type of emulsion and the oil-in-water-type emulsion of tegafur each in 50 mg, calculated in terms of tegafur, were prepared by adding tegafur aqueous solution to sesame oil containing hydrogenated castor oil following ultrasonic treatment, and then the prepared emulsions and aqueous solution as a comparative formulation were administered orally to rats (50 mg/5 ml/kg). The concentration levels of tegafur in plasma of femoral artery and lymph from thoracic duct cannula were measured simultaneously along a time course after administration and the pharmacokinetic parameters were investigated. At the same time, we examined the above described factors of 5-FU which is known as an active metabolite of tegafur. In comparison with tegafur solution, AUC and mean residence time of plasma tegafur were significantly increased in w/o-emulsion but significantly decreased in o/w-emulsion. Lymph flow rates were similar in both solution and w/o-emulsion but half in o/w-emulsion. Ratios between area under the lymph and plasma concentration time curves were always less than 1 reflecting the passive lymphatic delivery after oral administration of the prepared tegafur emulsions, but those to the 5-FU in the case of w/o-emulsion were more than 1. These results suggested that lymphatic delivery of tegafur by w/o-emulsion was more effective than that by o/w-emulsion due to its differences of formation ability of chylomicrons.