• Steel and Composite Structures
• /
• v.43 no.2
• /
• pp.271-278
• /
• 2022

Buckling is one of the most critical phoneme in the design of steel structures. Lateral torsional buckling (LTB) is particularly significant for slender beams generally subjected to loading in plane. The web distortion effects on LTB are not addressed explicitly in standards for flexural design of steel I-section members. Hence, the present study is focused to predict the influence of the web distortion on the elastic (L_r) limiting lengths given in American Institute of Steel Construction (AISC) code for the lateral torsional buckling (LTB) behavior of steel beams due to no provision in the code for consideration of web distortion. For this aim, the W44x335 beam is adopted in the buckling analysis carried out by the ABAQUS finite element (FE) program since it is one of the most critical sections in terms of lateral torsional buckling (LTB). The strain results at mid-height of the web at mid-span of the beam are taken into account as the monitoring parameters. The web strain results are found to be relatively greater than the yield strain value when L/L_r is equal to 1.0. In other words, the ratio of L/L_r is estimated from the numerical analysis to be about 1.5 when the beam reaches its first yielding at mid-span of the beam at mid-height of the section. Due to the effect of web distortion, the elastic limiting length (L_r) from the numerical analysis is obtained to be considered as greater than the calculated length from the code formulation. It is suggested that the formulations of the limiting length proposed in the code can be corrected considering the influence of the web distortion. This correction can be a modification factor or a shape factor that reduces sectional slenderness for the LTB formulation in the code.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.55-60
• /
• 2010

Ink transfer process from the printing roll to the moving web was investigated using a CFD technique for the application in R2R printed electronics. In line with the requirement that the web handling speed needs to be increased further for the cost competitiveness, the effects of web moving velocity with relatively complex roll patterns were analyzed. To make the present analysis more realistic, the numerical geometry and the ink properties were selected to match those of the real printing production system. Our numerical results showed that both web handling speed and complex printing-roll patterns influenced the shape of the transferred ink. As the web moving speed approaches towards 30mpm, a significant distortion of the shape of the transferred ink occurred. In the range of pattern width smaller than 100 microns, a phase distortion was also found to occur in all the printing-roll patterns considered in the present work but the ratio of the phase distortion to the line width gets smaller as the width becomes smaller. Thus, the web handling speed and the shape of printing-roll pattern will be important elements for the better printing quality under 100 micron line width range.

• Steel and Composite Structures
• /
• v.4 no.1
• /
• pp.23-36
• /
• 2004

The inelastic lateral-distortional buckling of doubly-symmetric hot-rolled I-section beam-columns subjected to a concentric axial force and uniform bending with elastic restraint which produce single curvature is investigated in this paper. The numerical model adopted in this paper is an energy-based method which leads to the incremental and iterative solution of a fourth-order eigenproblem, with very rapid solutions being obtained. The elastic restraint considered in this paper is full restraint against translation, but torsional restraint is permitted at the tension flange. Hitherto, a numerical method to analyse the elastic and inelastic lateral-distortional buckling of restrained or unrestrained beam-columns is unavailable. The prediction of the inelastic lateral-distortional buckling load obtained in this study is compared with the inelastic lateral-distortional buckling of restrained beams and the inelastic lateral-torsional buckling solution, by suppressing the out-of-plane web distortion, is published elsewhere and they agree reasonable well. The method is then extended to the lateral-distortional buckling of continuously restrained doubly symmetric I-sections to illustrate the effect of web distortion.

• Journal of Internet Computing and Services
• /
• v.9 no.5
• /
• pp.47-58
• /
• 2008

Charts can propagate information more effectively by visualizing various types of information. Due to this reason, many web developers often use charts when they display information on the web. However, using a chart requires a special dedicated software to install and it is difficult to share the finished charts since they are usually in raster format. The raster format images are fixed in size, therefore, experience image distortion problem when their sizes are changed. In this paper, we propose a web-based chart generating system using CML(Chart Markup Language) to solve the current compatibility and sharing problems. The proposed chart generating system first analyzes XML, Text, or HTML documents to extract chart information in the documents, and then it converts collected chart information to CML. The converted CML documents are displayed on the web browser using a vector method. The vector method has an advantage of protecting its images from distortion even when image sizes are scaled. The CML, proposed in this paper, is a chart markup language based on XML for modeling charts Information. If CML is used for presenting a chart in a web, it makes easier to share and to convert the chart information.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.4
• /
• pp.91-99
• /
• 2009

A visual stress may provoke migraine, cephalalgia, intervene a long term reading and learning capability and reduce the productivity of a laborer who uses computer for a good while. In this study, a web based screening tool for visual stress was developed, it applied to 72 visually normal young persons in parallel with traditional questionnaire about symptoms of visual stress. To estimate visual stress, It is proposed to measure difference of visual search time of Han Gul characters as targets between visual stressful pattern and non-visual stressful pattern as global background of characters. As a result of test, 5 subjects were screened whose mean visual search time in the stressful pattern with 6 CPD spatial frequency increase significantly more than in none stressful pattern(t-test, one-tailed, p=$1.0407\times10^{-11}$). 2 of them were diagnosed as mild visual stress syndrome in the clinic. None had visual distortion and 50% of subjects had visual discomfort in results of the questionnaire. Correlation between visual search time increase rate and normalized number of visual discomfort may be slight(C. coefficient=0.1355). This study may contribute as a basic research for screening person with migraine, visual reading disabilities and VDT syndrome. It is required to apply the test to visual reading disabilities, migraine with visual distortion and/or visual discomfort as well as normal person for higher reliability of the screening tool.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.2
• /
• pp.86-96
• /
• 2013

VP8, an open web media video format, has recently attractedmuch attention, particularly from major web browser companies, as a video codec for HTML5 on internet due to its good coding efficiency and royalty-free policy. Compared to other video compression schemes such as H.264/AVC, it has several distinctive coding tools that help to ensure good coding efficiency and low decoding complexity. In this paper, we investigate its coding techniques and analyze its rate-distortion (R-D) coding performance as compared to that of H.264/AVC.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.12
• /
• pp.1923-1932
• /
• 2013

In order to solve the problem of severely distorted images from a wide-angle camera, we propose a calibration method which corrects a radial distortion in wide-angle images by estimation and validation of camera model. First, we estimate a camera model consisting of intrinsic and extrinsic parameters from calibration patterns, where intrinsic parameters are the focal length, the principal point and so on, and extrinsic parameters are the relative position and orientation of calibration pattern from a camera. Next we validate the estimated camera model by re-extracting corner points by inversing the model to images. Finally we correct the distortion of the image using the validated camera model. We confirm that the proposed method can correct the distortion more than 80% by the calibration experiments using the lattice shaped pattern images captured from a general web camera and a wide-angle camera.

• Steel and Composite Structures
• /
• v.22 no.1
• /
• pp.45-61
• /
• 2016

The domestic and foreign scholars conducted many studies on mechanical properties of wave web steel beam and high-strength spiral stirrups confined concrete columns. Based on the previous research work, studies were conducted on the anti-seismic property of the end plate bolt connected wave web steel beam and high-strength spiral stirrups confined concrete column nodes applied with pre-tightening force. Four full-size node test models in two groups were designed for low-cycle repeated loading quasi-static test. Through observation of the stress, distortion, failure process and failure mode of node models, analysis was made on its load-carrying capacity, deformation performance and energy dissipation capacity, and the reliability of the new node was verified. The results showed that: under action of the beam-end stiffener, the plastic hinges on the end of wave web steel beam are displaced outward and played its role of energy dissipation capacity. The study results provided reliable theoretical basis for the engineering application of the new types of nodes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.649-652
• /
• 2007

Recently, it is increasing the interest in previous web and web 2.0 which mean differentiation. The previous system is typical Static web based on client and server model, while web 2.0 mean next generation web which web change and evolve fundamentally. In this paper, I suggest that the module on RSS reader available under web 2.0 standards. A currently used RSS feed do correct the part distortion which can be possible resolve the encoding problem of Hanguel and third-world language. The suggested module is implemented using Ajax. I developed the module for the use of effective contents on web 2.0 through the DragBox module based on the programming on mobility of Ajax and the design and implementation of automatic update module of RSS feed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1263-1270
• /
• 2008

Recently, it is increasing the interest in previous web and web 2.0 which mean differentiation. The previous system is typical Static web based on client and server model, while web 2.0 mean next generation web which web change and evolve fundamentally. In this paper, I suggest that the module on RSS reader available under web 2.0 standards. A currently used RSS feed do correct the part distortion which ran be possible resolve the encoding problem of Hanguel and third-world language. The suggested module is implemented using Ajax. I developed the module for the use of effective contents on web 2.0 through the DragBox module based on the programming on mobility of Ajax and the design and implementation of automatic update module of RSS feed.