• Food Science of Animal Resources
• /
• v.43 no.4
• /
• pp.674-684
• /
• 2023

Xinjiang province is the main camel feeding area in China with a large square, and camel milk from different areas have different qualities. By now, there are few reports about the quality of camel milk from different areas of Xinjiang province in China. In this study, seven batches of camel milk and one batch of cow milk were collected, and the contents of fat, protein, lactose, total solid, and nonfat milk solid of these milk samples were determined, as well as the contents of lysozyme and vitamin C. All samples were scored and compared by principal component analysis score and comprehensive weighted multi-index score. As the results, camel milk from different areas showed different contents of fat (4.62%-7.02%), protein (3.34%-3.95%), lactose (3.85%-4.79%), total solid (13.59%-17.00%), nonfat milk solid (8.55%-9.73%), vitamin C (12.10-41.25 ㎍/mL), and lysozyme (8.70-22.80 ㎍/mL), as well as different qualities. This variation would help people to know more about quanlity of camel milk in Xinjiang province. Camel milk from Jeminay showed the best quality, and then followed by camel milk from Fukang, Changji, and Fuhai, while cow milk showed the lowest score. Therefore, Jeminay is the most suitable place for grazing camels. Our findings show the different qualities of camel milk in different distribution areas of Xinjiang province, and provide an insight for the evaluation of camel milk. In the present study, only seven components in camel milk were determined, many other factors, such as cfu, mineral, and other vitamins, have not been considered.

• Earthquakes and Structures
• /
• v.26 no.2
• /
• pp.131-147
• /
• 2024

Damage caused by an earthquake depends on not just the intensity of an earthquake but also the region-specific construction practices. Past earthquakes in Asian countries have highlighted inadequate construction practices, which caused huge life and property losses, indicating the severe need to strengthen existing structures. Strengthening activities shall be proposed as per the proposed weighting factors, first at the higher weighted members to increase the capacity of the building immediately and thereafter, the other members. Through this study on gravity load-designed (GLD) buildings, relative weights are assigned to each storey and exterior and interior columns within a storey based on their contribution to the energy dissipation capacity of the building. The numerical study is conducted on mid-rise archetype GLD buildings, i.e., 4, 6, 8, and 10 stories with variable storey heights, in the high seismic zones. Non-linear static analysis is performed to compute weights based on energy dissipation capacities. The results obtained are verified with the non-linear time history analysis of 4 GLD buildings. It was observed that exterior columns have higher weightage in the energy dissipation capacity of the building than interior columns up to a certain building height. The damage in stories is distributed in a convex to concave parabolic shape from bottom to top as building height increases, and the maxima location of the parabola shifts from bottom to middle stories. Relative weighting factors are assigned as per the damage contribution. And the sequence for strengthening activities is proposed as per the computed weighting factors in descending order for regular RCC buildings. Therefore, proposals made in the study would increase the efficacy of strengthening activities.

• Investigative Magnetic Resonance Imaging
• /
• v.8 no.1
• /
• pp.17-23
• /
• 2004

Purpose : To evaluate changes in total cerebral blood flow (tCBF) with aging, parenchymal volume changes and vascular abnormalities, using 2 dimensional (D) phase-contrast magnetic resonance imaging (PC MRI). Materials and Methods : Routine brain MRI including T2 weighted image, time-of-flight (TOF) MR Angiography (MRA) and 2D PC MRI were performed in 73 individuals, including 12 volunteers. Normal subjects (12 volunteers, and 21 individuals with normal MRI and normal MRA) were classified into groups according to age (18-29, 30-49 and 50-66 years). For the group with abnormalities in brain MRIs, cerebral parenchymal volume changes were scored according to the T2 weighted images, and atherosclerotic changes were scored according to the MRA findings. Abnormal groups were classified into 4 groups: (i) mild reduction in volume, (ii) marked reduction in volume by parenchymal volume and atherosclerotic changes, and (iii) increased volume and (iv) Moya-moya disease. Volumetric flow was measured at the internal carotid artery (ICA) and vertebral artery bilaterally using the velocity-flow diagrams from PC MRI, and combined 4 vessel flows and tCBF were compared among all the groups. Results : The age-specific distribution of tCBFs in normal subjects were as follows: $12.0{\pm}2.1ml/sec$ in 18-29 years group, $11.8{\pm}1.9ml/sec$ in 30-49 years group, $10.9{\pm}2.2ml/sec$ in 50-66 years group. The distribution of tCBFs in the different subsets of the abnormal population were as follows: $9.5{\pm}2.5ml/sec$ in the group with mild reduction in volume, $7.6{\pm}2.0ml/sec$ in the group with marked reduction in volume, and $7.3{\pm}1.2ml/sec$ and $7.0{\pm}1.1ml/sec$ in the increased parenchymal volume and Moya-moya disease groups respectively. Conclusion : Total cerebral blood flow decreases with increasing age with a concomitant reduction in parenchymal volumes and increasing atherosclerotic changes. It is also reduced in the presence of increased parenchymal volume and Moya-moya disease.2D PC MRI can be used as a tool to evaluate tCBF with aging and in the presence of various conditions that can affect parenchymal volume and cerebral vasculature.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1421-1433
• /
• 2014

In this study, appropriate probability distribution and parameter estimation method were selected to perform snowfall frequency analysis. Generalized Extreme Value (GEV) and Probability Weighted Moment Method (PWMM) appeared to be the best fit for snowfall frequency analysis in Korea. Snowfall frequency analysis applying GEV and PWMM were performed for 69 stations in Korea. Peak snowfall corresponding to recurrence intervals were estimated based on frequency analysis while snow loads were calculated using the estimated peak snowfall and specific weight of snow. Design snow load map was developed using 100-year recurrence interval snow load of 69 stations through Kriging of ArcGIS. The 2009 Korean Building Code and Commentary for design snow load was assessed by comparing the design snow loads which calculated in this study. As reflected in the results, most regions are required to increase the design snow loads. Thus, design snow loads and the map were developed from based on the results. The developed design snow load map is expected to be useful in the design of building structures against heavy snow loading throughout Korea most especially in ungaged areas.

• Journal of Korea Multimedia Society
• /
• v.8 no.3
• /
• pp.297-312
• /
• 2005

Aggregation is an operation that plays a key role in multidimensional OLAP (MOLAP) systems of data warehouse. Existing aggregation operations in MOLAP have been proposed for file structures such as multidimensional arrays. These tile structures do not work well with skewed distributions. This paper presents a physical design methodology for storage structures ni MOLAP that use the multidimensional tile organizations adapting to a skewed distribution. In uniform data distribution, we first show that the performance of multidimensional analytical processing is highly affected by the similarity of the shapes between query regions and page regions in the domain space of the multidimensional file organizations. And than, in skewed distributions, we reflect the effect of data distributions on the design by using the shapes of the normalized query regions that are weighted with data density of those query regions. Finally, we demonstrate that the physical design methodology theoretically derived is indeed correct in real environments. In the two-dimensional file organizations, the results of experiments indicate that the performance of the proposed method is enhanced by more than seven times over the conventional method. We expect that the performance will be more enhanced when the dimensionality is more than two. The result confirms that the proposed physical design methodology is useful in a practical way.

• Journal of the Korean Institute of Gas
• /
• v.20 no.2
• /
• pp.35-42
• /
• 2016

Formamide is a colorless fluid with ammonia odor, and irritable when inhaled. It has $LD_{50}$ value of > 5,577 mg/kg in rats for acute oral toxicity and NOAEL of 113 mg/kg/day for target organ (liver) of whole body toxicity. It is also known as reproductive toxicant (1B) and TWA(Time Weighted Average) for it is 10 ppm. Workplace measurements of work places dealing with formamide showed the ppm of all 25 samples was very lower than WEL. However, the exposure concentration can change, depending on workplace condition such as the intensity of work, operating local ventilation system, and wearing protection equipment (Respirators). Therefore, considering it with the risk of whole body toxicity and reproductive toxicity, exposure quantity of each imaginary scenario was calculated at 5.16, 1.72, and $0.43mg/m^3$. The average value was calculated at 0.02-0.58, 0.02-0.66 at 90 percent of cumulative distribution, 0.02-0.69 at 95 percent of cumulative distribution. Therefore, it was generally evaluated to be safe because all values were below 1. However, caution is required to prevent health hazard because it has hepatotoxicity and reproductive toxicity and risk of a high level momentary exposure, depending on the condition of workplace.

• Journal of Nutrition and Health
• /
• v.40 no.sup
• /
• pp.29-38
• /
• 2007

The purpose of this study was to establish an association between the percent of energy from total sugar and disease prevalence of obesity, hypertension, dyslipidemia, insulin resistance, and metabolic syndrome with the context of the current population dietary practice in Korea. The Korean National Health and Nutrition Survey, 2001 and 2002 dataset were used as the source of data for this research. Usual nutritional intakes for over 20 years old people were calculated from the two non-consecutive dietary intake data from KNHANES 2001 and 2002 dataset. SAS and SUDAAN were used for statistical analyses. Sample weighted means, standard errors, and population percentages were calculated, and multiple logistic regression model with adjustment for covariates were used to determine the odds ratios(ORs) and 95% confidence intervals. Subjects were categorized as 3 ways and compared the LS means and ORs for heath factors. First, subjects excluding pregnant women, were categorized according to percent of energy from the usual total sugar intakes as ${\leq}10%$, 11-15%, 16-20%, 21-25%, >25%. Risk of LDL cholesterol showed a tendency to increase in the '>25%' group compared to the '<10%' group. The risks of the other health effects did not show any significant differences. Second, the subjects were categorized considering both Acceptable Macronutrient Distribution Range(AMDR) from carbohydrate and %Energy from total sugar as 'CHO<55% & Total sugar ${\leq}10%$', 'CHO 55-70% & Total sugar 11-25%', and '$CHO{\geq}70%$ & Total sugar ${\geq}25%$'. The risk of obesity tended to increase in the '$CHO{\geq}70%$ & Total sugar ${\geq}25%$' group compared to the 'CHO<55% & Total sugar ${\leq}10%$'. Third, the subjects were categorized as 'CHO<55% & Total sugar ${\leq}10%$', 'CHO 55-70% & Total sugar 11-20%', and '$CHO{\geq}70%$ & Total sugar ${\geq}20%$'. The risk of obesity also tended to increase in the '$CHO{\geq}70%$ & Total sugar ${\geq}20%$' group compared to the 'CHO<55% & Total sugar ${\geq}20%$' group. In conclusion, risk of LDL cholesterol showed a tendency to increase in the over 25% total sugar intake group, and the risk of obesity tended to increase in the 20-25% total sugar intake and high carbohydrate intake group. The risks of hypertension, hyperlipidemia, insulin resistance, and metabolic syndrome were not associated with total sugar intakes. More research to elucidate the association for Korean between the intakes of total sugar, added sugar, glucose, fructose, and sweeteners and diseases prevalences shoud be excuted in the future.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.175-184
• /
• 2017

Recently, PM10 is becoming a main issue in Korea because it causes a variety of diseases, such as respiratory and ophthalmologic diseases. This research studied to spatial information application cases for evaluating the feasibility of the location for PM10 observation stations utilizing Geogrphic Information System(GIS) spatial analysis. The spatial Information application cases for optimal location assessment were investigated to properly manage PM10 observation stations which are closely related with public spatial data and health care. There are 31 PM10 observation stations in Seoul city and the observed PM10 data at these stations were utilized to understand the overall assessment of PM10 stations to properly manage using interpolation methods. The estimated PM10 using Inverse Distance Weighted(IDW) and Kriging techniques and the map of PM10 concentrations of monitoring stations in Seoul city were compared with public spatial data such as precipitation, floating population, elementary school location. On the basis of yearly, seasonal and daily PM10 concentrations were used to evaluate the feasibility analysis and the location of current PM10 monitoring stations. The estimated PM10 concentrations were compared with floating population and calculated 2015 PM10 distribution data using zonal statistical methods. The national spatial data could be used to analyze the PM10 pollution distribution and additional determination of PM10 monitoring sites. It is further suggested that the spatial evaluation of national spatial data can be used to determine new location of PM10 monitoring stations.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.6
• /
• pp.121-130
• /
• 2007

In this paper, large scale experimental model tests were performed to investigate the distribution of earth pressure acting on embedded rigid pipes having different bedding conditions. For these tests, very light weighted EPS blocks were installed at top and bottom of the rigid pipe and Jumunjin Standard Sand was used as a ground material. As results of model tests, for the case of no bedding on the pipe, the measured pressure at the bottom of the pipe was $4.96_{tf/m^2}$ whereas they were in the range of $1.87{\sim}4.96_{tf/m^2}$ in the case of EPS beddings being installed at the top and the bottom of the pipe. Therefore, for the case of EPS bedding being installed, the ratio of reduced pressures acting on the pipe, compared with the case of no EPS beddings, were in the rage of 16~62%. As a result of parametric test with changing the locations of EPS bedding, the trend of reducing the stress acting on the pipe was in the order of bottom bedding, top bedding, and top and bottom bedding. Effect of bedding positions on the reduced magnitude of acting pressure on the pipe was more significant in the case of top bedding than in the case of the bottom bedding.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.2
• /
• pp.116-123
• /
• 2007

This experiment was conducted to investigate the distribution and burden characteristics of heavy metals in the rainwater sampled at Suwon area, in the middle part of Korea, from April 2002 to October 2003. The relationship between concentration of heavy metal and other chemical properties in the rainwater was also evaluated. Chemical properties in the rainwater were various differences with raining periods and years. It appeared that a weighted average pH of rainwater was ranged from 4.7 to 5.5. Heavy metal concentrations in the rainwater were ranked as Zn>Pb>Cu>Ni>Cr>As>Cd. As compared with heavy metal concentrations of rainwater in 2002, Cd, Cu and As were higher than other element in 2003. There were positive correlation between major ionic components, such as Ca, Mg, and K, and heavy metal concentrations of rainwater, and As, CU, Cu, Zn and Ni were relatively higher relationship than Pb and Cr in respective to correlation coefficient. For heavy metal distribution of rainwater, the order of average enrichment factors was Cd>Pb>AS>Cu>Zn>Ni>Cr, and these were relatively higher than the natural component such as Fe, Mg and Ca. The monthly enrichment factors were relatively high in the spring (from April to May) at Suwon. The monthly amount of heavy metal precipitation was high in the rainy season from June to August because of great influence of rainfall.