• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.250.2-250.2
• /
• 2014

Currently, teeth whitening method which is applicable to dental surgery is that physician expertises give medical treatment to teeth directly dealed with a high concentration of hydrogen peroxide and carbamide peroxide. If hydrogen peroxide concentration is too high for treatment of maximized teeth whitening effect [1], it is harmful to the human body [2]. To the maximum effective and no harmful teeth whitening effect in a short period of time at home, we have observed the whitening effect using carbamide peroxide (15%) and a low-temperature atmospheric pressure plasma jet which is regulated by the Food and Drug Administration. The gas supplied conditions of the non-thermal atmospheric pressure plasma jet was with the humidified (0.6%) gas in nitrogen or air at gas flow rate of 1000 sccm. Also, the measurement of chemical species from the jet was carried out using the optical emission spectroscopy (OES), the evidence of increased reactive oxygen species compared to non-humidified plasma jet. We have found that the whitening effect of the plasma is very excellent through this experiment, when bovine teeth are treated in carbamide peroxide (15%) and water vapor (0.2 to 1%). The brightness of whitening teeth was increased up to 2 times longer in the CIE chromaticity coordinates. The colorimetric spectrometer (CM-3500d) can measure color degree of whitening effect.

• Toxicological Research
• /
• v.27 no.4
• /
• pp.205-209
• /
• 2011

The present study was performed to compare the antioxidative and whitening activities of fermented soybean extract (FSB) and non-fermented soybean extract (SB). Antioxidative and whitening activities of FSB and SB were evaluated by the determination of DPPH, superoxide radical and hydroxyl radical scavenging activities, linoleic acid inhibition activity, and tyrosinase inhibition activity. FSB showed the higher effect than SB in the antioxidative activities. Also FSB showed the better effect than SB in whitening activity. These results demonstrated that the fermentation played a more excellent role than the non-fermentation in antioxidation and whitening. Therefore, this study suggested that FSB could be a useful cosmetic ingredient for antioxidation and skin whitening.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.127-133
• /
• 2017

The purpose of this study is to confirm the effect of natural tooth whitening using fruits that can be easily accessed in real life by increasing interest in tooth whitening in modern society. Twenty premolar teeth were divided into five groups (n=4). Strawberry (A), lemon (B), banana skin (C), baking soda (D) and whitening toothpaste (E) were treated with a toothbrush on the enamel surface. The tooth surface was treated with a toothbrush at the same time for 3 minutes for breakfast, lunch, and dinner, then washed with sterile distilled water, and stored in saline solution. This procedure was repeated for 4 weeks, and the color change of teeth was observed at intervals of one week. After 4 weeks, there was a significant difference in tooth color change after 3 weeks(p<0.05). Among them, strawberry and lemon showed higer effects to whitening toothpaste. It is believed that strawberries and lemons have a higher whitening effect than whitening toothpaste. Whitening toothpaste may be replaced with a safe natural whitening effect using strawberries and lemons instead of chemical ingredients that may be harmful to human body.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.4 no.4 s.10
• /
• pp.81-86
• /
• 2006

Numerous novel ingredients have been introduced for the hight functionality of whitening cosmetics. Tough the preliminary research, we have found water extracts Bombyx mori have high whitening efficacy. The results of the research for the whitening effect of Bombyx Mori L. are as follow 1. Bombyx Mori L. inhibited concentration dependently the generation of melanin increased by the stimulation of $\alpha$-MSH and protoporphyrin IX, and $IC_{50}$ value was 8.3, 9.2 ${\mu}M$ respectively. 2. Melanin increased by the stimulation of $\alpha$-MSH and protoporphyrin IX was five to seven times superior in the inhibiting effect, compared with kojic acid used as positive control group. 3. Bombyx Mori L. did not have a decolorizing effect on melanin already generated. 3. Bombyx Mori L. was observed to have toxicity of over 100 ${\mu}M$ for the mouse melanoma B16 cells. Therefore, These results suggest that water extracts of Bombyx mori have inhibitory activity against mushroom tyrosinase and inhibitory activity of melanin synthesis in B16 melanoma cells in vitro.

• Journal of dental hygiene science
• /
• v.23 no.4
• /
• pp.351-360
• /
• 2023

Background: The purpose of this study is to investigate the tooth whitening effect of Listerine Healthy White and provide effective management of extrinsic discoloration by comparing the whitening effects of existing whitening products. Methods: The included study four groups: those using whitening gel, whitening toothpaste, and Listerine Healthy White and a control using artificial saliva. Each group received 40 bovine tooth specimens, which were stained with commonly consumed tooth-coloring-inducing foods; black tea, black coffee, and instant noodles for 72 hours. The specimens were treated with tooth whitening materials for 5 weeks, after which the lightness (L^*) was measured weekly using a spectrophotometer. Results: There was a significant difference in lightness among the groups between the 1st and 5th week of treatment for all tooth-coloring-inducing foods (p<0.05). When comparing the changes in lightness values from before whitening to the 5th week of whitening for all tooth-coloring-inducing foods, the order of change was as follows: whitening gel, whitening toothpaste, Listerine Healthy White, and artificial saliva. Listerine Healthy White showed a significant whitening effect for all tooth-coloring-inducing foods (p<0.05). Particularly, changes in lightness values for specimens stained by black tea after 5 weeks of whitening were in the following order: whitening gel (21.72), whitening toothpaste (14.89), Listerine Healthy White (12.91), and artificial saliva (3.85). For specimens stained by black coffee, the changes in lightness values were in the following order: whitening gel (12.99), whitening toothpaste (9.66), Listerine Healthy White (7.91), and artificial saliva (3.12). Lastly, changes in lightness values for specimens stained by instant noodles were as follows: whitening gel (10.84), whitening toothpaste (9.85), Listerine Healthy White (7.71), and artificial saliva (2.61). Conclusion: Listerine Healthy White exhibits continuous whitening effects over time, and for consumers seeking convenient ways to achieve tooth whitening effects at home, consistent use of Listerine Healthy White is recommended.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.72-85
• /
• 1983

Rice whitening is performed by basically two different whitening actions known as abrasive and frictional. The former adopted in the emery stone abrasive type whiteners and the latter in the jet-air friction type. Comparative milling yields and whitening efficiencies between the whitening system consisting of jet-air friction type whiteners only and the system consisting of both abrasive- and jet-air friction-types have not yet been rigorously defined. This study was to examine the effect of combined operations of abrasive- and jet-air friction-type rice whiteners on milling yields and whitening efficiencies. The small capacity commercial units of the abrasive- and friction-type whiteners were used for the experiments. The combinations of whitening treatments were: 1) Once in the abrasive type and then two to three times in the friction type, 2) twice in the abrasive and then two to three times in the friction type and 3) three to five times in friction type. In these tests, counter pressures for the friction type whiteners were established differently as required to get about the same degree of whitening at the end of predetermined numbers of the repeated operations. The speed of emery stone and the slot angle of the screen were also the factors varied in the abrasive type whitener. Sheukwang rice variety having 13.05% M.C. was used in the tests. The dependent variables were the milled- and head-rice recoveries and electricity consumption. The results of the study are summarized as follows: 1. It was found that in the whitening systems consisting of abrasive- and friction-type whiteners slot angle of the screen, the rotational speed of emery stone roller had significant effect on the milling yields and whitening efficiency. In general, the increase of the emery stone roller speed from 690 to 950 rpm presented a positive effect on milling yield, and one-pass abrasive milling combinations had higher milling yields than two-pass abrasive milling combinations. 2. It was apparent that if the slot angle of the screen and the speed of emery stone roller are modified and set at an optimum level, the combination whitening system consisting of abrasive- and friction-type whiteners is better than the pure frictional whitening system consisting of jet-air friction type in terms of milling yields and efficiencies. 3. In the rice whitening system consisting of abrasive- and jet-air friction-type whiteners, the best whitening performance was obtained when the slot angle of the screen and the rotational speed of emery stone roller were $45^{\circ}$ and 950rpm, respectively, for the one-pass abrasive milling combinations. However, for the two-pass abrasive mi11ing combinations, the best performance was obtained with $75^{\circ}$ of slot angle and 950 rpm of the emery stone roller speed. 4. As compared with pure frictional whitening systems, the combination systems produced more milled rice by 0.8-1.0% point and more head rice by 0.5-1.5% point, and consumed less electricity by 0.15-0.20 KwH per 100kg of milled rice when the abrasive whiteners were operated in the modified conditions as described in item 3 above. Further study is recommended to find out optimum operational and design conditions of abrasive type whiterners.

• Journal of Environmental Health Sciences
• /
• v.35 no.5
• /
• pp.417-425
• /
• 2009

The purpose of this study was to investigate the whitening effect of Angelicae dahuricae Radix water extract (ADWE) by its application on artificial tanning spots which were induced by 1,500 $mJ/cm^2$ of UVB radiation on the backs of brown guinea pigs weighing approximately 450~500 g. Thirty ${\mu}l$ of ADWE, at each application, were applied twice a day, 5 days a week, for 8 weeks to the guinea pigs. The artificial tanning spots were divided into 3 groups which were vehicle control group [propylene glycol: ethanol: water (5:3:2)], positive control group (2% hydroquinone) and experimental group (2% ADWE). The visible whitening effect and changes in melanin index were evaluated once a week. On completion of the experiment, the animals were sacrificed under anesthetization, and the artificial tanning spots were excised by biopsy punch and stained with Hematoxylin and Eosin (H&E) to observe histological change and also stained with Fontana-Masson's silver (F-M) and S-100 to observe melanin pigmentation and melanocytes. In the gross observation, the experimental group showed higher pigmentation than the positive control group but lower pigmentation than the vehicle control group. Histological observation confirmed that ADWE had a positive whitening effect by showing a lower distribution of melanin and melanocytes in the epidermis of experimental group than in the vehicle control group.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.28 no.3
• /
• pp.63-90
• /
• 2002

Quantitative measurement of melanin is the best method to evaluate whitening effect of cosmetics on human skin. However, non-invasive method to quantify human skin melanin with high precision has not been established. Whitening effect of cosmetics on the skin results in lightening of skin color. Therefore, it is reasonable to measure skin color in a reproducible manner for the assessment of whitening effect. Several Instruments or methods, such as colorimeter, mexameter, and visual assessments by experts , have been used for this purpose. In this lecture I will review the details of various assessment methods for the evaluation of whitening effect and discuss the pros and cons of each method. Then I will present briefly the results of clinical trial. Finally I will introduce new non-invasive modalities to quantify melanocytes.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.544-544
• /
• 2003

We investigated the inhibitory effect of whitening materials with growth factor or alone on melanomas derived from Human (B-16) and mouse (SK-MEL-31) using melanin content. Melanin content was determined by the absorbance value at 470nm per cells. we used the growth factors known as activators of Adenylate cyclase, Protein kinase C and tyrosine kinase pathway separately. In addition, we compared the action of UV-induced with non-biological growth factor with whitening materials in melanomas derived from Human and mouse. The results showed that the aspect of inhibitory effect of whitening materials on B16 and SK-MEL-31 was not different. And, the action of each growth factor involved in the differentiation and proliferation of melanoma on the inhibition of melanogenesis in B-16 and SK-MEL-31 using whitening agents showed no difference. Also, The action of UV -induced and non-biological growth factors didn't exhibit different pattern on the effect of whitening agent in B-16 and SK-MEL-31.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.5
• /
• pp.268-272
• /
• 2013

The aim of this study was to develop an ultrasonic tooth-whitening apparatus using piezoelectric transducers, which enhance bleaching efficiency by applying ultrasound, while performing a teeth whitening procedure. For this purpose, an ultrasonic transducer was designed and manufactured, and the effects of reduction in the whitening material's concentration and in the whitening treatment time through using the ultrasound cavitation phenomenon were confirmed. Also, the validity of this study was investigated by comparing the whitening performance with a commercialized optical whitener, through color comparison. The results revealed that the ultrasound whitener produced color values that were enhanced by as much as double that of the conventional LED light whitening method. Even when the operational time was reduced by half, the ultrasound method showed superior performance by over 54% compared to the conventional light whitener, revealing that the ultrasound method showed a remarkable treatment reduction effect.