• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.279-282
• /
• 2007

Typically a wireless sensor network consists of a number of nodes that sense surrounding environment and collaboratively work to process and route the sensing data to a sink or gateway node. We propose an architecture with support of multiple routers in IPv6-based Low-power Wireless Personal Area Network (6LoWPAN). Our architecture provides traffic load balancing and increases network lifetime as well as self-healing mechanism so that in case of a router failure the network still can remain operational. Each router sends its own Router Advertisement message to nodes and all the nodes receiving the messages can select which router is the best router with the minimum hop-count and link information. We have implemented the architecture and assert our architecture helps in traffic load balancing and reducing data transmission delay for 6LoWPAN.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.130-134
• /
• 2012

This paper introduces a home network service system using a low-cost wireless router on OpenWrt which can be remotely controled by Android devices. The proposed system consists of an embedded system development platform for home network service control based on OpemWrt embedded Linux, an embedded system development platform, a remote control on Android, and a home linghting device made by an interface board with LEDs. The prototype system is made of a wireless router of Buffalo, WZR-HP-G450H, Arduino Uno interface board with LEDs, and an Android development kit of HBE-SM5-S421. The operation was performed by TCP/IP programming for Android remote control, socket programming between Android development kit and wireless router, and UART communication programming between the interface board and wireless router. The implementation result shows that a low cost home network systme could be implemented with a wireless router.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.121-124
• /
• 2001

Dynamic Source Route(DSR) protocol is a simple and efficient routing protocol designed specially for use of the multi-hop Ad Hoc Network. DSR allows the network to be completely self-organized and self-configured without the need for any existing infrastructure or administration. DSR protocol consists of the two mechanisms of Router discovery and Router Maintenance, works entirely On-demand in all aspects. In this paper, we will present the performance of DSR protocol on the multi-hop wireless Ad Hoc Networks, illustrate it with simulation, and then analysis the algorism of DSR.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.229-235
• /
• 2017

Until now, a study on a ubiquitous sensor network has been mainly concentrated in the areas of sensor nodes, and as a results, technologies related with sensor node were greatly developed. Despite of many achievements on research and development for a sensor node, a ubiquitous sensor network may failed to establish the actual service environment because variety of restrictions. In order to provide a actual service using a ubiquitous sensor networks applied to many results on research and development for a sensor nodes, a study on a wired/wireless composite router must be carried out. However a study on a wired/wireless composite router is relatively very slow compared with the sensor node. In this study, developed a high-performance router platform supporting IPv6 that can provide high-speed wired/wireless interface and QoS, and it can provide the multimedia service Interlocking the wireless sensor network and the Internet network. To analysis a given network environment and to develop the appropriate hardware and software in accordance with this requirement.

• Convergence Security Journal
• /
• v.7 no.4
• /
• pp.43-50
• /
• 2007

Electric quantity of sensor nodes is extremely limited, and the battery replacement is very difficult in wireless sensor networks. This paper proposes analytic model on energy loss in different route structure, which it is based upon the data-centric storage and the directed diffusion is energy consumption in the wireless sensor network.

• Journal of KIISE:Information Networking
• /
• v.32 no.5
• /
• pp.603-614
• /
• 2005

The wireless LAN environment using Mobile IP is constructed and managed to be connected with Ethernet based wired networks. However, there have been many problems with wireless networks using Mobile IP. Some important facts on network performance have not been considered when introducing wireless LAN by Mobile IP to wired networks. In this paper, we suggest schemes which can solve problems on Handover latency caused by the asymmetrical connectivity of the Access Router at applying the HMIPv6 and on binding updates due to the MN frequent movement. Our proposed schemes can reduce network latency by using the HMIPv6 architecture with a virtual router layer, and reduce communication overhead by interchanging information of the MN movement between routers. Our schemes are expected to assist in constructing a more real and effective wireless LAN environment based on the HMIPv6 and FMIP.

• The KIPS Transactions:PartC
• /
• v.13C no.3 s.106
• /
• pp.345-352
• /
• 2006

In the integrated wired/wireless network which consists of the Internet and moving networks, multiple wireless links are used to connect a fixed host(FH) in the Internet to a mobile host(MH) in the moving network. For use in such an environment, we propose a scheme to overcome the TCP performance degradation due to the packet losses over the wireless links without losing the end-to-end TCP semantics. The proposed scheme in each mobile router(MR) allows to obtain the information regarding packet losses over the upstream wireless links based on the received packet sequence number and the ACK number. This information is delivered to the upstream router, which enables the upstream access router(AR) or MR to quickly retransmit the lost packets. The proposed scheme has the feature to quickly recover the packet losses incurred over the upstream wireless links and the performance of the proposed scheme is evaluated through simulation. It is shown that the significant performance gain can be obtained using the proposed scheme compared with the snoop mechanism which maintains end-to-end TCP semantics and does not require any additional features at the source and/or destination nodes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.542-547
• /
• 2018

Various countries around the world are conducting various studies to apply information and communication technology to marine safety. Based on this, the International Maritime Organization (IMO) has established the e-Navigation standard to apply the latest information and communication technology to marine services. In Korea, the Ministry of Maritime Affairs and Fisheries is promoting Korean e-navigation considering domestic marine environment and is trying to apply LTE communication method as a high-speed wireless communication method at sea. In this paper, we describe the development of an LTE based marine router system supporting 700Mhz frequency band allocated for high speed maritime wireless communication service. Experiments on the possibility of 100km distance communication from base station using LTE based ship router are shown. LTE - based high - speed maritime wireless communication router system can provide communication infrastructure necessary to develop various accident prevention technologies that may occur at sea.

• Journal of KIISE:Information Networking
• /
• v.35 no.5
• /
• pp.384-394
• /
• 2008

A wireless router is a device which allows several wireless clients to share an internet line using NAT (Network Address Translation). In a school or a small office environment where many clients use multiple wireless routers, a client may select anyone of wireless routers so that most clients can be clustered to a small set of the wireless routers. In such a case, there exists load unbalancing problem between clients and wireless routers. One of its result is that clients using the busiest router get poor service. The other is that the resource utilization of the whole wireless routers becomes very low. In order to resolve the problems, we propose a load sharing scheme to maximize network bandwidth utilization based on multiple SSID. In a time internal, the proposed scheme keeps to show the available bandwidth information of all the possible wireless routers to clients through multiple SSID. A new client can select the most available band with router. This scheme allows to achieve a good load balancing between clients and routers in terms of bandwidth utilization. We implemented the proposed scheme with ASUS WL 500G wireless router and performed experiments. Experimental results show the bandwidth utilization improvement compared to the existing method.

• The KIPS Transactions:PartC
• /
• v.15C no.2
• /
• pp.111-118
• /
• 2008

A wireless router is a device which allows several wireless clients to share an internet line using NAT (Network Address Translation). In a school or a small office environment where many clients use multiple wireless routers, a client may select any one of wireless routers so that most clients can be clustered to a small set of the wireless routers. In such a case, there exists load unbalancing problem between clients and wireless routers. One of its result is that clients using the busiest router get poor service. The other is that the resource utilization of the whole wireless routers becomes very low. In order to resolve the problems, we propose a load sharing scheme to maximize network bandwidth utilization based on SSID(Service Set IDentifier) hiding. The proposed scheme keeps checking the available bandwidth of all the possible wireless routers in a time interval and select the most available one. If a new client appears, the most available router is visible to him or her whereas the others are not visible. This is handled by SSID hiding in the proposed scheme. We implemented the proposed scheme with ASUS WL 500G wireless router and performed experiments. Experimental results show the bandwidth utilization improvement compared to the existing method.