• Journal of Veterinary Clinics
• /
• v.15 no.2
• /
• pp.279-290
• /
• 1998

The diagnosis of canine diabetes mellitus is generally made by measuring serum fructosamine levels. The Rosental's end points Tas and El Din's kinetic, and Johnson and colleagues'kinetic techiniques were compared for the measuring serum fructosamine levels. In the Rosental's end point methods within-run and between-run coefficient of variability (CV) were 2.4-3.5% and 6.8-8.5%, respectively, and in the Tas and El Din's kinetic method, within-run and between-run CV were 1.3-3.0% and 3.4-3.9%, respectively. In the Johnson and colleagues'kinetic methods within-run and between-run CV were 0-1.8% and 3.1-6.8%1 ruts- pectively. Hyperlipidemia induced by oral administration of 3 ml of corn oil per kilogram body weight did not affect serum fructosamine concentration significantly in the Johnson and colleagues' kinetic method Johnson and colleagues'kinetic method is most reliable and consistant on the basis of comparison study.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.3
• /
• pp.265-275
• /
• 2000

By using thermal desorption/gas chromatograph/flame ionization detector(TD/GC/FID), this study was carried out to evalute an accuracy and a precision on Benzene(B), Toluene(T), o-Xylene(X) analysis in an industrial hygiene laboratory. Limits of detection of TD/GC/FID on B, T, X were showed 13.75ng/sample or less. For the accuracy of the method by concentration levels, overall bias was showed 7.7% as an absolute value, and the pooled coefficient of variation showed 3.51%. For the precision on repeatability of peak area and retention time between within-run and between-run of analytical system, it is showed the results of within-run gave better than those of between-run. Also the accuracy by sorbents(Tenax TA and Chromosorb 106)was evaluated, and the precision on reproducibility between MDHS72 and this study was compared. It is showed it is possible for TD/GC/FID to evaluate accurately B, T, X concentration levels of less than 1ppm at indoor or outdoor of workplaces in Korea.

• YAKHAK HOEJI
• /
• v.43 no.4
• /
• pp.429-436
• /
• 1999

A simple, accurate and reproducible Capillary electrophoresis (CE) assay has been developed for the determination of baicalin, baicalein, wogonin and chrysin in Scutellaria baicalensis. Successful separation of these compounds has been obtained in 35 mM phosphate butter (pH 7.0) using a untreated fused silica capillary ($57{\;}cm{\times}75{\;}{\mutextrm{m}}$ i.d.) at $25^{\circ}C$ with the electric field of 19kV. Baicalin, baicalein wogonin and chrysin was separated and detected at 280 nm 13 min. The detection limits of CE were acceptable compared to HPLC. Reproducibilities of migration time and peak area were 0.66~1.11% (within-run), 2.18~3.38% (between-run) and 3.50~4.55% (within-run), 3.97~4.82%(between-run) at CE. The results indicate that CE could be a promising technique for quality and quantity control analysis of Scutellaria baicalensis as a validation method.

• Journal of Labour Economics
• /
• v.21 no.2
• /
• pp.17-46
• /
• 1998

In this paper, I pursue an empirical analysis of different patterns of employment and wage adjustments to demand changes for the US and Japan. Analyzed are the data in the 70's and 80's, the period that the two countries are believed to show most conspicuous diverging patterns. Using the framework of cointegration and error correction, I establish that in the US it is employment level, while in Japan it is wages, that is more responsive to output fluctuations both in the long run and the short run. All the comparisons on the long run relationships are estimated and tested based on the system cointegrating regressions, and the transition from the short run to the long run responses are investigated using impulse response analysis of the error correction models. I also study differences across genders and establishment sizes within each country. For males and females in Japan, the adjustments are significantly different both in the long run and the short run, but for the firms of different sizes they diverge only in the short run. In contrast to some of the earlier work, the gender effect turns out to be insignificant in the US.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.41-49
• /
• 2020

This study investigates the short-run and long-run causal behavior of the Philippine stock market index volatility under vector error correction environment. The variables were tested first for stationarity and then long-run equilibrium relationship. Moreover, an impulse response function was estimated to examine the extent of innovations in the independent variables in explaining the Philippine stock market index volatility. The results reveal that the volatility of the Philippine stock market index exhibit long-run equilibrium relationship with Peso-Dollar exchange rate, London Interbank Offered Rate, and crude oil prices. The short-run dynamics-based VECM estimates indicate that in the short-run, increases (i.e., depreciation) in Peso-Dollar exchange rate cause PSEI volatility to increase. As for the London Interbank Offered Rate, it causes increases in PSEI volatility in the short-run. The adjustment coefficients used with the long-run dynamics validates the presence of unidirectional causal long-run relationship from Peso-Dollar exchange rate, London Interbank Offered Rate, and crude oil prices to PSEI volatility, and bidirectional causal long-run relationship between PSEI volatility and London Interbank Offered Rate. The impulse response functions developed within the VECM framework demonstrate the positive and negative reactions of PSEI volatility to unanticipated Peso-Dollar exchange rate, London Interbank Offered Rate, and crude oil price shocks.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1992.08a
• /
• pp.157-157
• /
• 1992

Accuracy of numerical simulations of tsunami has a often been discussed in terms of the final run-up heights and inundated areas. The present technique of simulation is said to yield accurate results within an error of 15 % as long as run-up height concerns.(omitted)

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.297-306
• /
• 2014

The paper presents the numerical analysis of wave run-up over rubble-mound breakwaters covered by antifer units using a technique integrating Computer-Aided Design (CAD) and Computational Fluid Dynamics (CFD) software. Direct application of Navier-Stokes equations within armour blocks, is used to provide a more reliable approach to simulate wave run-up over breakwaters. A well-tested Reynolds-averaged Navier-Stokes (RANS) Volume of Fluid (VOF) code (Flow-3D) was adopted for CFD computations. The computed results were compared with experimental data to check the validity of the model. Numerical results showed that the direct three dimensional (3D) simulation method can deliver accurate results for wave run-up over rubble mound breakwaters. The results showed that the placement pattern of antifer units had a great impact on values of wave run-up so that by changing the placement pattern from regular to double pyramid can reduce the wave run-up by approximately 30%. Analysis was done to investigate the influences of surface roughness, energy dissipation in the pores of the armour layer and reduced wave run-up due to inflow into the armour and stone layer.

• Korean Management Science Review
• /
• v.31 no.3
• /
• pp.27-39
• /
• 2014

We derive a generalized statistic form of Q control chart, which is especially suitable for short run productions and start-up processes, for the detection of process mean shifts. The generalization means that the derived control chart statistic concurrently uses within lot variability and between lot variability to explain the process variability. The latter variability source is noticeably prevalent in lot type production processes including semiconductor wafer fabrications. We first obtain the generalized Q control chart statistic when both the process mean and process variance are unknown, which represents the case of implementing statistical process control charting for short run productions and start-up processes. Also, we provide the corresponding generalized Q control chart statistics for the rest of three cases of previous Q control chart statistics : (1) both the process mean and process variance are known (2) only the process mean is unknown and (3) only the process variance is unknown.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.3
• /
• pp.282-291
• /
• 2017

The main aim of this study is to investigate the effect of berm breakwater on wave run-up. A total of 200 numerical analysis tests have been carried out in this paper to investigate the effect of berm width, wave height, and wave period on the wave run-up, using an integrating technique of Computer-Aided Design (CAD) and Computational Fluid Dynamics (CFD). Direct application of Navier Stokes equations within the berm width has been used to provide a more reliable approach for studying the wave run-up over berm breakwaters. A well tested Reynolds-averaged Navier-Stokes (RANS) code with the Volume of Fluid (VOF) scheme was adopted for numerical computations. The computational results were compared with theoretical data to validate the model outputs. Numerical results showed that the simulation method can provide accurate estimations for wave run-up over berm breakwaters. It was found that the wave run-up may be decreased by increasing the berm width up to about 36 percent. Furthermore, the wave run-up may increase by increasing the wave height and wave period up to about 53 and 36 percent, respectively. These results may convince the engineers to use this model for design of berm breakwater in actual scale by calculating the Reynolds numbers.

• Industrial Engineering and Management Systems
• /
• v.9 no.3
• /
• pp.262-274
• /
• 2010

This article investigates how to adaptively predict the time-varying metrology delay that could realistically occur in the semiconductor manufacturing practice. Metrology delays pose a great challenge for the existing run-to-run (R2R) controllers, driving the process output significantly away from target if not adequately predicted. First, the expected asymptotic double exponentially weighted moving average (DEWMA) control output, by using the EWMA and recursive least squares (RLS) prediction methods, is derived. It has been found that the relationships between the expected control output and target in both estimation methods are parallel, and six cases are addressed. Within the context of time-varying metrology delay, this paper presents a modified recursive least squares-linear trend (RLS-LT) controller, in combination with runs test. Simulated single input-single output (SISO) R2R processes subject to various time-varying metrology delay scenarios are used as a testbed to evaluate the proposed algorithms. The simulation results indicate that the modified RLS-LT controller can yield the process output more accurately on target with smaller mean squared error (MSE) than the original RLSLT controller that only deals with constant metrology delays.