• Journal of the Korean Wood Science and Technology
• /
• 제50권6호
• /
• pp.375-391
• /
• 2022

Improving public awareness of wood is crucial for expanding the use of wood and establishing a wood culture. In this study, the environment and trends of the public's wood utilization were analyzed using a questionnaire survey and online text mining at a time when eco-friendly practices are gaining popularity. As a result of reducing climatic and environmental concerns and its positive physical and psychological effects, the use of wood is predicted to rise in areas intimately connected to everyday living, such as wood furniture, wooden structures, and interior materials. Nonetheless, there was a negative awareness that wood was expensive, difficult to maintain, and associated with deforestation. The correlations between wood-related search terms on major Korean portal sites were analyzed and categorized into five groups: Wooden architecture, cultural education, woodworking, wood industry, and wood policy. As a building material, wood was seen as more traditional and friendly than reinforced concrete and stone. Eighty-six percent of respondents expected to utilize wood as a building material in the future, regardless of whether the wood is domestically produced or imported. Sixty-five percent responded favorably about the effects of wood on the health of wooden home inhabitants. It is believed that both active publicity and quantifiable value analysis of human and environmental friendliness are required to increase pro-environment awareness of wood utilization.

• 한국가구학회지
• /
• 제11권2호
• /
• pp.37-43
• /
• 2000

Ginkgo trees have long been planted in Korea as roadside trees and ornamental trees, but the wood was seldom used except some utilization f3r small artifacts. Soaring prices of imported wood and future uncertainty about long-term supply of foreign woods have stimulated research on value-added utilization of less-utilized domestic wood resources such as Ginkgo wood. The processing properties of Ginkgo wood were investigated to determine its utilization potential in this study, and the results of treatability, drying characteristics, gluability, paintability, bending properties, chemical discoloration characteristics were presented.

• 한국가구학회지
• /
• 제11권1호
• /
• pp.75-84
• /
• 2000

Ginkgo trees have long been planted in Korea as roadside trees and ornamental trees, but the wood was seldom used except some utilization for small artifacts. Soaring prices of imported wood and future uncertainty about long-term supply of foreign woods have stimulated research on value-added utilization of less-utilized domestic wood resources such as Ginkgo wood. The properties of Ginkgo wood were investigated to determine its utilization potential in this study, and the results of anatomical, physical, and mechanical studies were presented with chemical compositions.

• Journal of the Korean Wood Science and Technology
• /
• 제22권3호
• /
• pp.51-58
• /
• 1994

Environmental conservation has become one of the greatest concerns of all the people in the world. This issue is related to wood utilization in two major view points such as carbon dioxide emitted by the use of manufacturing energy and absorbed during the growth of trees. Wood construction materials require less manufacturing energy, which, in turn, means less carbon dioxide emission. In addition, wood keeps absorbed carbon in itself as far as it is not burnt. Therefore, wood is environmentally superior to other materials in terms of potential effects on atmospheric carbon dioxide. As examples of the environmental effect of wood utilization, the following two results were obtained: 1) If wood construction becomes popular in Korea as in Japan, more than 24% of carbon dioxide emission during construction of residential housings can be reduced: and 2) If aluminum windows are substituted by wood windows, more than 19% of carbon dioxide emission can be reduced. If the principle of "cut and plant" is kept well, wood is the best construction material for environmental protection as well as human residence.

• 한국가구학회지
• /
• 제22권3호
• /
• pp.239-243
• /
• 2011

In this study, the coating properties and surface performance of exotic cherry wood (Prunus serotina) were estimated, reviewing color difference, hardness and abrasion resistibility in order to evaluate probability as construction interior members such as wall and floor. The reduction effect of color difference was represented in the order of water soluble color stain, water soluble transparent stain, and non-coated lumber. However, the tendency of distinct difference according to wood grain pattern was not found. The wavy grain lumber showed better properties in hardness and resistance to abrasion than quarter grain. In conclusion, it was supposed that the application of wavy grain lumber in wall and floor as interior materials would be acceptable in practicality.

• Journal of the Korean Wood Science and Technology
• /
• 제40권5호
• /
• pp.327-334
• /
• 2012

Wood and concrete show significantly different physical properties, and it need to be firstly understood for using wood-concrete composite. This study is performed for compensating this and effective hybridization of wood and concrete. This research in planned for wood-concrete composite after previous research which deals the shear performance with different anchorage length of steel rebar in wood. Yield mode and reference design value (Z) were derived using EYM (European Yield Model). And the yield mode changed before and after anchorage length of 10~15 mm - $I_s$ mode to IV mode. There was not increasing tendency of shear performance with increased anchorage length for over 20 mm of anchorage in concrete. And wood composite shows 65% and 93% on initial stiffness and yield load respectively compared with the wood-concrete composite. Wood-concrete composite showed brittle failure after yield point while wood-to-wood composite showed ductile failure.

• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.330-339
• /
• 2009

본 연구에서는 삼나무 재색제어에 적합한 적정 열처리 조건을 구명하고, 열처리에 따른 다양한 재질변화를 평가하고자 하였다. 국산 삼나무에 대한 온도제어 열처리를 통하여, $170^{\circ}C$ 이상의 열처리 조건에서 심변재 사이의 재색차이가 줄어드는 경향을 확인하였으며, 이러한 경향은 처리시간이 증가함에 따라 더 크게 나타났다. 열처리재의 평형함수율이 무처리재에 비해 50% 정도 낮아 목재의 사용과정에서 나타나는 수분에 의한 성능저하 문제를 예방할 수 있을 것으로 기대되며, 열처리가 부후균에 대한 내후성 증가에도 영향하는 것으로 확인됨에 따라 친환경 방부처리 기술로써 열처리의 적용에 대한 본격적인 연구가 필요할 것으로 판단된다. 열처리재의 역학성능은 무처리재에 비해 대체로 증가하는 것으로 나타났으나, 연성이 감소함으로 인하여 충격휨흡수에너지는 크게 감소하는 결과를 보여 열처리재의 용도를 결정하는데 있어서 이러한 물성 변화가 고려되어야 할 것이다. 열처리에 의한 물성변화의 원인을 규명하기 위하여 미세구조의 변화를 관찰하였으나 특별한 차이는 나타나지 않았다. 따라서 화학성분의 변화를 분석함으로써 물성변화의 원인을 규명하는 추가적인 연구가 필요할 것으로 여겨진다.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.196-196
• /
• 1982

There is a heavy stocked wood volume in the forest of Kang-Won Province compared with the other forests of Korean Provinces. It mainly, however, consists of non-productive and inferior hardwoods and shrubs which grows naturally. -This naturally grown hardwood forest should be cut and reforested with more economical confierous and diciduous tree species by artificial and natural regeneration under the positive government support. This study was carried out to survey the reasonable and economical utilization measures on harvesting wood products when existing hardwood forest should be cut primarily. This is the rust report on the resources and the classification of tree species by the uses of wood growing in the hardwood forest of Kang-Won Province. According to the investigation, 321 hardwood species are growing in this forest, and 141 species of them are extremely not suitable for wood production. The usable species as fuel wood was 180, and these are able to classify into the 22 groups by the uses of wood.

• Journal of the Korean Wood Science and Technology
• /
• 제34권5호
• /
• pp.79-87
• /
• 2006

Value-added utilization of the disposed ash trees due to the infestation by Emerald Ash Borer (EAB) was explored by converting them into particleboards (PBs) and wood-plastic composites (WPCs). The experimental result showed that PB panels could be successfully manufactured from the ash wood but compaction ratio need to be higher than 1.3 in order to meet the standard requirements listed by American National Standards Institute (ANSI). Ash wood plastic composites with high density polyethylene (HDPE) and polypropylene (PP) were also prepared with additives by extrusion. Physical and mechanical properties of ash wood plastic composite compared favorably to those made of pine and maple.

• Journal of the Korean Wood Science and Technology
• /
• 제39권2호
• /
• pp.172-178
• /
• 2011

Three different finger-jointed lumbers which have different geometric features and adhesives were manufactured and studied in this study. Larch and pitch pine lumbers with and without preservative treatment were used. Bending MOE was measured as the preliminary investigation for grouping the specimen. After the finger, bending MOE of two wood species without preservative treatment shows over 97% property of the control group. The tensile modulus also shows almost same property after the finger joint. And it is found out that the preservative treatment induce little effect on bending and tensile MOE. Based on this result, high performance of examined finger-jointed lumber can be found out. However, tensile strength decreased around 20% which would be induced by the crack along the root of the finger which is formed near the edge during manufacturing stage. And finger-jointed lumber with preservative treatment even shows higher decrement of the tensile strength with higher wooden part failure mode.