• Korean Journal of Microbiology
• /
• v.42 no.3
• /
• pp.195-198
• /
• 2006

Lethal toxin is a critical virulence factor of anthrax. It is composed two protein: protective antigen (PA) and lethal factor (LF). PA binds to specific cell surface receptors and, forms a membrane channel that mediates entry of LF into the cell. LF is a zinc-dependent metalloprotease, which cleaves MKKs [MAPK (mitogen-activated protein kinase) kinases] at peptide bonds very close to their N-termini. In this study, we suggest application of cell-based assays in the early phase of drug discovery, with a particular focus on the use of yeast cells. We constructed MEK1 expression system in yeast to determine LF activity and approached cell-based assay system to screen inhibitors, in which the results covering the construction of LF-substrate in yeast expression vector, expression, and LF-mediated proteolysis of substrate were described. These results could provided the basic steps in design of cell-based assay system with the high efficiency, rapidly and easy way to screening of inhibitors.

• Korean Journal of Microbiology
• /
• v.45 no.4
• /
• pp.419-424
• /
• 2009

To provide the basis of biosensor based on the lux genes from bioluminescent bacteria of Photobacterium leiognathi and Vibrio harveyi, we test the expression of lux genes in several strains of Escherichia coli. The expression of the recombinant plasmid of PlXba.pT7-3, containing all lux genes requiring for light emission without adding substrate, in E. coli 43R was so strong to see the blue-green light in single colony as well as in the alginate immobilized cell. In addition, the light intensity was decreased by adding heavy metal ion such as cadmium and zinc ions. These result raise the possibility that a biosensor can be developed using the lux genes system.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.5
• /
• pp.423-430
• /
• 2015

$Cu/ZnO/Al_2O_3$ catalysts for water gas shift (WGS) reaction were synthesized by co-precipitation method with the fixed molar ratio of Cu/Zn/Al precursors as 45/45/10. Copper and zinc precursor were added into sodium carbonate solution for precipitation and aged for 24h. During the aging period, aluminum precursor was added into the aging solution with different time gap from the precipitation starting point: 6h, 12h, and 18h. The resulting catalysts were characterized with SEM, XRD, BET surface measurement, $N_2O$ chemisorption, TPR, and $NH_3$-TPD analysis. The catalytic activity tests were carried out at a GHSV of $27,986h^{-1}$ and a temperature range of 200 to $400^{\circ}C$. The catalyst morphology and crystalline structures were not affected by aluminum precursor addition time. The Cu dispersion degree, surface area, and pore diameter depended on the aging time of Cu-Zn precipitate without the presence of $Al_2O_3$ precursor. Also, the interaction between the active substance and $Al_2O_3$ became more stronger as aging duration, with Al precursor presented in the solution, increased. Therefore, it was confirmed that aluminum precursor addition time affected the catalytic characteristics and their catalytic activities.

• The Korean Journal of Ecology
• /
• v.25 no.4
• /
• pp.253-259
• /
• 2002

Application of phytoremediation in the polluted area to remove undesirable materials is a complex and difficult subject without detailed investigation and experimentation. We investigated the accumulation patterns of cadmium and lead in plants naturally grown, the bioavailability of plants to accumulate these toxic metals and the responses of P. thunbergii to cadmium and lead. The soil samples contained detectable lead (＜$17.5_\mu$g/g), whereas cadmium was not detected in the soils of study area. The whole body of Persicaria thunbergii contained detectable lead (＜320.$8_\mu$g/g/g) but cadmium was detected only in the stem (＜7.$4_\mu$g/g/g) and root (＜10.$4_\mu$g/g/g) of P. thunbergii. Cadmium was not detected in Trapa japonica and Nymphoides peltata, whereas lead was detected in T. japonica (＜323.$7_\mu$g/g/g) and N. peltata (＜177.$5_\mu$g/g/g). Correlation coefficient between lead content in soil and in these plant samples represented positive correlation. The total content of lead in each plant sample increased in the order of N. peltata$\leq$P. thunbergii

• Journal of Environmental Science International
• /
• v.11 no.3
• /
• pp.183-189
• /
• 2002

Investigation was carried out to observe the dominant bacteria and the effect of metals(Cd ＆ Zn) and its nitrate compound on growth of bacteria isolated from the three tributaries and lower reach of the Nakdong River. Mean CFU(log$_{10}$) level was highest in Kumho River(8.30 CFU), Nam River, Hwang River, and Mulgum followed. Staphylococcus xylosus, Staph. lentus, Pasteurella pneumotropica, Aeromonas hydrophilla were dominant species in each study site. Cadmium powder and Zinc powder showed strong effect to inhibit the growth of Micrococcus spp., Pasteurella pneumotropica, Aeromonas hydrophilla. But, nitrate compounds of Cd and Zn(Cd(NO$_3$)$_2$4$H_2O$, Zn(NO$_3$)$_2$6$H_2O$) did not clearly show the strong effect to inhibit the growth of dominants.s.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.665-670
• /
• 2020

Buffer layer in CIGS thin-film solar cells improves energy conversion efficiency through band alignment between the absorption layer and the window layer. ZnS is a non-toxic II-VI compound semiconductor with direct-transition band gaps and n-conductivity as well as with excellent lattice matching for CIGS absorbent layers. In this study, the structural and optical properties of ZnS thin films, deposited by RF magnetron sputtering method and subsequently performed by the rapid thermal annealing treatment, were investigated for the buffer layer. The zincblende cubic structures along (111), (220), and (311) were shown in all specimens. The rapid thermal annealed specimens at the relatively low temperatures were polycrystalline structure with the wurtzite hexagonal structures along (002). Rapid thermal annealing at high temperatures changed the polycrystalline structure to the single crystal of the zincblende cubic structures. Through the chemical analysis, the zincblende cubic structure was obtained in the specimen with the ratio of Zn/S near stoichiometry. ZnS thin film showed the shifted absorption edge towards the lower wavelength as annealing temperature increased, and the mean optical transmittance in the visible light range increased to 80.40% under 500℃ conditions.

• Korean Journal of Environmental Agriculture
• /
• v.6 no.1
• /
• pp.25-30
• /
• 1987

This study was conducted to find out the effect of several improvers such as triple super phosphate, slaked lime, wollastonite and gypsum for reducing Cd content in brown rice. Several improvers were applied to two different types of soils which are contaminated with copper-zinc mine wasted and sludge.(Soil I contained Cd : 7.88, Cu : 57.9, Zn : 175.0 ppm, Soil II contained Cd : 3.95, Cu : 30.2, Zn :124.0 ppm) In general, effects of improvers on reducing content of Cd, Cu and Zn in brown rice were greater in soil I than soil II. In soil I, the Cd content of brown rice was reduced to 0.4ppm below by application of triple superphosphate, fused phosphate, slaked lime and gypsum, 98, 225, 190 and 276Kg/10a, respectively. Triple superphosphate was more effective than fused phosphate in reducing uptake of Cd, Cu and Zn by applying them as an equal amount of phosphorous, also to equal alkalinity, slaked lime had the highest effect. Negatively linear effect was found between soil pH and Cd and Zn content in brown rice. As to above results, it was no doubt that triple superphosphate, fused phosphate and slaked lime would be applied to reduced heavy metals in brown rice. The slaked lime, triple super phosphate and fused phosphate were available to reduce uptake of Cd, Cu and Zn by rice plant grown in the soil contaminated with mine waste and sludge.

• Korean Journal of Environmental Agriculture
• /
• v.9 no.2
• /
• pp.121-131
• /
• 1990

Four crop plants, such as green onion(Allium ascalonicum L.), radish(Raphanus sativus L.), potato(Solanum tubersum L.) and chinese cabbage(Brassica pekinensis Rupr), were grown in greenhouses to determine the accumulations of Cd and Zn absorbed by the plants grown on soils treated with municipal sewage sludge of different levels of 0, 22.5, 45.0 and 90.0 ton $ha^{-1}$ as soil dry weight. The result was analyzed to be comparable to the heavy metal content in the plant tissues among the crop species and the statistical characteristics were investigated to determin a possible relationship between causes of increased contents of Cd and Zn in plants and in soils. The results were as follows : 1. The Cd and Zn content in experimental crop plants increased with increase in quantity of treatment sludge. 2. The Cd and Zn content in roots of all experimental plants increased with sludge treatment amount in soil, in the following order : green onion>potato>chinese cabbage>radish. 3. The Cd content in leaves of crop plants were high in this order : green onion>radish>potato>chinese cabbage, and the Zn content in leaves of crop plants was high in this order. : potato>radish>chinese cabbage>green onion. 4. Concentrations of Cd in potato tubers, radish roots and chinese cabbage leaves ranged from 0.03 to 0.12 ppm. 5. Concentrations of Cd and Zn in plant tissues grown in sludge treated soil of 90.0 ton $ha^{-1}$ were 1.2 to 10 times and 0.4 to 2.3 times higher as compared with those absorbed from sludge-free soil, respectively. 6. The accumulation rates of Cd and Zn in sludge-treated plant tissue were almost constant except for green onion roots.

• Resources Recycling
• /
• v.26 no.2
• /
• pp.56-65
• /
• 2017

This study is an experimental study on the corrosion protection performance according to the configuration ratio of the Zn and Al. A metal spraying was used as the arc metal spraying method, a specimen was produced by varying the proportion ratio and coating thickness of the Zn and Al. Experimental methods visually observed to corrosion of the specimen for 1, 3, 7, 15 days was conducted in accordance with the CASS salt spray test. This study has confirmed that the performance of the corrosion protection improved against the increase in the Al content. Further, it was confirmed that excellent perfomance is exhibited when the coating thickness is secured over $80{\mu}m$. In addition, the SEM analysis was performed to observe the cross-sectional shape of the metal spraying specimen after CASS testing. The analysis result showed that the deterioration of the metal spraying coating layer was reduced as the Al content increases.

• Journal of the Korean institute of surface engineering
• /
• v.13 no.3
• /
• pp.146-154
• /
• 1980

The effects of various electrodeposition conditions (deposition temperature and cathode current density) on preferred orientation and microhardness of electrodeposited Ni-Sn and Sn-Zn alloys were studied. At deposition temperatures from 25$^{\circ}$ to 95$^{\circ}C$ and constant cathode current density of 270 and 530 A/$m^2$ Ni-Sn and Sn-Zn were codeposited in chloride-fluoride acid and stannate-cyanide alkaline electrolyte bath respectively. Ni-Sn alloy deposited at temperatures from 25$^{\circ}$ to 35$^{\circ}C$ was composed of single phase of $Ni_3Sn_4$ with 73 wt.% Sn and the one deposited at temperatures from 45$^{\circ}$ to 95$^{\circ}C$ was made of multiphase mixture of NiSn, $Ni_3Sn_2$ and $Ni_3Sn_4$ with nearly equiatomic composition (65.5 wt.% Sn). The random orientation of thermody-namically metastable NiSn phase (hexagonal structure) predominated at deposition temperature range 25$^{\circ}$-45$^{\circ}C$, and the strong (110) preferred orientation was found at 65$^{\circ}$-85$^{\circ}C$ and then disappeared again at 95$^{\circ}C$. The microhardness of Ni-Sn deposits increased with deposition temperature up to 85$^{\circ}C$, and then decreased at constant cathode current density. The preferred orientation and the maximum microhardness were discussed in terms of lattice contractile stress which result from desorption of hydrogen atom absorbed in deposit lattice. The Sn content of Sn-Zn alloy deposits increased with deposition temperature up to 75$^{\circ}C$, and then decreased at constant cathode current density of 530 A/$m^2$. It also decreased with cathode current density up to 530 A/$m^2$, and then increased at constant deposition temperature of 25$^{\circ}C$. Sn-Zn alloy deposits were composed of two-phase mixture of ${beta}$-Sn and Zn. The preferred orientations of ${beta}$-Sn (tetragonal structure) changed with deposition temperature. The microhardness of Sn-Zn deposits decreased with deposition temperature. It also increased with cathode density up to 530 A/$m^2$, and then decreased at constant deposition temperature of 25$^{\circ}C$. The microhardness of Sn-Zn deposits was observed to be determinded more by the Sn content than by the preferred orientation.