• 제목/요약/키워드: zinc

검색결과 4,812건 처리시간 0.039초

뽕나무 종자 발아시의 Protease 발현기구 (Activation Mechanism of Protease in the Germination of Mulberry Seeds)

  • 배계선
    • 한국잠사곤충학회지
    • /
    • 제35권1호
    • /
    • pp.1-6
    • /
    • 1993
  • 뽕나무종자(Morus Lhou Koidz)를 28$^{\circ}C$의 암소에서 5일간 발아시키면서 매일 hormone을 농도별로 처리한 후 protease 활성의 변화를 각각 비교하였다. 또 효소활성이 가장 높았던 4일째 시료로부터 protease를 추출하여 부분정제하고 그 효소의 특성을 조사하였다. 그 결과는 다음과 같다. 1. Hormone 처리구의 발아종자는 효소활성이 GA3가 가장 높았고 그 다음이 zeatin과 kinetin이었으며 hormone 혼합구는 GA3 10$\mu$M에 zeatin 10$\mu$M과 kinetin 10$\mu$M을 혼합한 구가 가장 활성이 높았다. 2. 효소활성은 10ml 주입한 한천배지구가 대조구보다 4일째 약 14% 증가하였다. 3. 뽕나무씨앗으로부터 추출한 protease는 DEAE-Toyopearl 650M, Butyl-Toyopearl, Hydrozyl apetite 및 Toyopearl HW55M 방법으로 조효소의 313배로 정제하였다. 정제한 후 효소의 비활성이 175unit/mg였다. 4. 효소반응이 최적 pH는 5.0, 최적온도는 37$^{\circ}C$였다. 효소는 37$^{\circ}C$이하에서는 안정하였으나 52$^{\circ}C$에서는 10분간 처리로 약 50% 감소하였다. 5. 효소활성을 수은, 철, 아연 및 구리 이온에 의하여 활성이 억제된 반면 Mg, Cr 및 A1은 촉진되었다. 또한 효소활성은 azocasein을 기질로 했을 때 Km값은 0.89mM이었다.

  • PDF

Sol-gel deposited TiInO thin-films transistor with Ti effect

  • Kim, Jung-Hye;Son, Dae-Ho;Kim, Dae-Hwan;Kang, Jin-Kyu;Ha, Ki-Ryong
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.200-200
    • /
    • 2010
  • In recent times, metal oxide semiconductors thin films transistor (TFT), such as zinc and indium based oxide TFTs, have attracted considerable attention because of their several advantageous electrical and optical properties. There are many deposition methods for fabrication of ZnO-based materials such as chemical vapor deposition, RF/DC sputtering and pulsed laser deposition. However, these vacuum process require expensive equipment and result in high manufacturing costs. Also, the methods is difficult to fabricate various multicomponent oxide semiconductor. Recently, several groups report solution processed metal oxide TFTs for low cost and non vacuum process. In this study, we have newly developed solution-processed TFTs based on Ti-related multi-component transparent oxide, i. e., InTiO as the active layer. We propose new multicomponent oxide, Titanium indium oxide(TiInO), to fabricate the high performance TFT through the sol-gel method. We investigated the influence of relative compositions of Ti on the electrical properties. Indium nitrate hydrate [$In(NO^3).xH_2O$] and Titanium isobutoxide [$C_{16}H_{36}O_4Ti$] were dissolved in acetylacetone. Then monoethanolamine (MEA) and acetic acid ($CH_3COOH$) were added to the solution. The molar concentration of indium was kept as 0.1 mol concentration and the amount of Ti was varied according to weighting percent (0, 5, 10%). The complex solutions become clear and homogeneous after stirring for 24 hours. Heavily boron (p+) doped Si wafer with 100nm thermally grown $SiO_2$ serve as the gate and gate dielectric of the TFT, respectively. TiInO thin films were deposited using the sol-gel solution by the spin-coating method. After coating, the films annealed in a tube furnace at $500^{\circ}C$ for 1hour under oxygen ambient. The 5% Ti-doped InO TFT had a field-effect mobility $1.15cm^2/V{\cdot}S$, a threshold voltage of 4.73 V, an on/off current ratio grater than $10^7$, and a subthreshold slop of 0.49 V/dec. The 10% Ti-doped InO TFT had a field-effect mobility $1.03\;cm^2/V{\cdot}S$, a threshold voltage of 1.87 V, an on/off current ration grater than $10^7$, and a subthreshold slop of 0.67 V/dec.

  • PDF

플라스틱 기판상에 저온 증착된 IZO박막의 특성 연구

  • 정재혜;정유정;윤정흠;이성훈;이건환
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.455-455
    • /
    • 2010
  • 차세대 디스플레이로 널리 알려져 있는 플렉서블 디스플레이는 휴대하기 쉽고, 깨지지 않으며, 변형이 자유로워 현재 우리 사회에 크게 주목받고 있다. 플렉서블 디스플레이의 구현을 위해서는 기존의 유리 기반 디스플레이 소자 기술에 더하여 플렉서블 기판소재에 적용 가능한 투명전도막 기술의 확립이 필요하다. 디스플레이 산업에서 주로 사용되는 투명전도막은 ITO (indium tin oxide) 및 IZO (indium zinc oxide)와 같은 투명전도성 산화물 박막 (TCO, transparent conducting oxide)이다. 그런데 플라스틱 기판이 굽힘 환경에 놓이게 되면 그 위에 증착된 산화물 박막이 쉽게 파손될 수 있다. 따라서 플렉서블 디스플레이 기술에 있어서 변형에 따른 TCO 박막의 파괴 거동에 대한 연구가 필수적이다. 본 연구에서는 PET (polyethylene terephthalate) 기판 상에 증착된 IZO 박막의 반복 굽힘 시 계면구조 변화에 따른 파괴거동을 조사하였다. 플라스틱 기판의 사용을 위해서는 산소 및 수분의 투과 방지막이 필요하며 본 연구에서는 투과 방지막 (또는 보호막)으로서 $SiO_x$ 박막을 적용하였다. IZO 박막은 $In_2O_3$ - 10 wt% ZnO 타겟을 사용하여 RF magnetron sputtering법으로 $100^{\circ}C$ 미만에서 저온 증착하였다. 보호막으로 사용되는 $SiO_x$ 박막은 HMDSO (hexamethyldisiloxane)와 Ar 및 $O_2$ 혼합기체를 이용하는 PECVD 방법으로 합성하였다. 변형에 따른 TCO 박막의 파괴 거동을 조사하기 위하여 반복 굽힘 시험 (cyclic- bending test)을 실시하였다. 반복 굽힘 시험 중 실시간으로 IZO 박막의 전기저항 변화를 측정하여 박막의 파괴 거동을 모니터링 하였다. 시편 A (135 nm-thick IZO/PET), B (135 nm-thick IZO/ 90 nm-thick $SiO_x$/PET), C (135nm-thick IZO/ 300 nm-thick $SiO_x$/PET)에 대하여 곡지름 35mm, 1000회 반복 굽힘을 실시하여 변형 중의 전기저항 변화를 조사하였다. 그리고 굽힘 시험 완료 후, FE-SEM을 이용한 시편 표면형상 관찰을 통하여 균열생성 정도를 관찰하였다. 반복 굽힘 시험 결과, A 와 C 시편의 경우, 각각 반복 굽힘 20회, 550회에서 급격한 전기저항의 증가가 관찰되었다. 그러나 B 시편의 경우, 1000회 반복 굽힘 후에도 전기저항의 변화는 나타나지 않았다. 이와 같이 반복 굽힘에 의한 IZO 박막의 파괴 거동 변화는 IZO 박막과 기판의 계면구조변화에 기인한 것으로 해석된다. IZO 박막과 기판의 계면에 $SiO_x$ 층을 삽입함으로써 계면 접합강도가 향상되었을 것으로 추측된다. 따라서 변형에 대한 파괴 저항 특성이 우수한 투명전도성 산화물 박막의 형성을 위해서는 적절한 계면구조 제어를 통한 계면 접합 특성의 향상이 필요하다.

  • PDF

스핀코팅 방법으로 제작된 ZnO 나노 섬유질 박막의 전구체 농도에 따른 표면 및 광학적 특성 (Effects of Precursor Concentration on Surface and Optical Properties of ZnO Nano-Fibrous Thin Films Fabricated by Spin-Coating Method)

  • 김민수;김군식;임광국;조민영;전수민;최현영;이동율;김진수;김종수;이주인;임재영
    • 한국진공학회지
    • /
    • 제19권6호
    • /
    • pp.483-488
    • /
    • 2010
  • 스핀코팅 방법을 이용하여 다양한 농도의 전구체로 ZnO 나노 섬유질 박막(ZnO nano-fibrous thin films)을 성장하였고, 그에 따른 표면 및 광학적 특성 변화를 scanning electron microscopy (SEM)와 photoluminescence (PL)을 이용하여 측정하였다. 전구체 농도가 0.4 mol (M) 이하 일 때는 성장률이 낮아 ZnO 핵생성만이 되었고, 0.6 M 이상일 때 ZnO 박막은 나노섬유질 구조가 되었다. 전구체 농도가 더욱 증가함에 따라 ZnO 나노 섬유질의 굵기가 굵어졌고 ZnO 박막의 두께도 단계적으로 두꺼워졌다. 전구체 농도가 증가함에 따라 ZnO 나노 섬유질 박막의 photoluminescence (PL)의 근밴드가장자리 광방출(near-band-edge emission) 피크 세기와 full-width at half-maximu (FWHM)이 증가하였고, 깊은 준위 광방출(deep-level mission) 피크는 적색편이(red-shift)하였다.

전과정 평가에 의한 하천 호안 공법의 환경성 평가에 관한 연구 (Study on the Environmental Quality Assessment of River Revetment Technique by Life-Cycle-Assessment)

  • 김국일;안원식
    • 한국수자원학회논문집
    • /
    • 제40권6호
    • /
    • pp.485-494
    • /
    • 2007
  • 본 연구는 자연형 하천 설계시 하천의 친환경적 설계를 고려하고자 전과정평가(Life-Cycle-Assessment, 이하 LCA)에 의해 하천호안에 사용되는 공법과 그 공법에 사용되는 재료의 환경성을 평가하였다. 자연형 하천에 적용되는 에너지 및 기초자재의 환경성을 검토한 결과 단위중량당 가솔린, 디젤, 시멘트, 원주목 순으로 환경영향이 발생하는 것으로 나타났고, 단위면적에 적용된 호안공법의 환경성을 비교한 결과 돌망태공법, 옹벽공법, 방틀공법 순으로 환경부하가 큰 것으로 분석되었다. 또한 돌망태공법의 전기아연도금철선의 소재를 개선하였을 경우 저감되는 환경영향을 분석하였다. 본 연구에 적용된 대상유역은 섬진강의 지류인 지방하천인 경천의 하천정비구역 $0.3km^2$로 선정하였으며, 인공시설물 예상 수명 30년을 기준으로 연구를 수행하였다. 시범유역의 호안공법의 환경성을 평가한 결과 돌망태를 적용한 공법이 환경부하가 가장 크게 나타났으며, 이후 레미콘을 사용한 공법 순으로 분석되었다. 자연형 하천 설계시 적용되는 호안공법의 선정시 본 연구의 결과를 이용할 수 있을 것으로 판단되며 이에 따라 환경친화적 자연형 하천 설계에 이바지 할 것으로 기대된다.

Yeast내에서 탄저병 원인균인 Bacillus anthracis의 치사독소인 Lethal Factor 단백질 발현 (Expression of Anthrax Lethal Factor, a Major Virulence Factor of Anthrax, in Saccharomyces cerevisiae)

  • 황혜현;김정목;최경재;정회일;한성환;구본성;윤문영
    • 미생물학회지
    • /
    • 제41권4호
    • /
    • pp.275-280
    • /
    • 2005
  • Bacillus anthracis는 탄저병의 병원체이다. 탄저병의 독소는 Bacillus anthracis가 가진 세가지 독소로 이루어져 있다. protective antigen (PA), lethal factor (LF)그리고 edema factor (EF)로 구성되어 있다. PA는 세포수용체와 결합하여 활성화 과정을 거친 후 LF 흑은 EF를 세포질 안으로 이동시켜 주는 역할을 한다. LF는 금속이온 $(Zn^{2+})$ 의존적 단백질 가수분해 효소로써 탄저병에 감염된 동물들의 치사독소로 작용하게 된다. 따라서 LF에 대한 특성 분석 및 억제재 개발에 관한 연구는 탄저치료제 개발에 매우 중요한 과정이라 할 수 있다. 본 연구에서는 탄저독소의 치료제 개발을 위해 선행되어야 하는 LF 고처리량 활성검증방법 및 저해제 선별에 더 높은 효율을 가지기 위해 이러한 시스템 방법 등을 이용하여 세포내 검정방법의 기초 자료를 마련하고자 하였다. 이를 위하여 yeast를 숙주로 한 LF 발현 vector의 구축과, 구축한 발현 시스템을 yeast에 형질전환 하여 plasmid의 안정성 및 LF유전자의 발현을 확인하였다. 본 연구는 LF유전자의 발현을 진핵세포 내에서 처음으로 시도했으며, 세포내 검증 시스템 도입의 기초적 자료를 제공하였다. Yeast내에서의 LF의 발현은 탄저병의 저해제 선별이나 활성측정검증을 생체 내에서 용이하게 할 수 있다는 가능성을 나타냈다.

대한산업보건협회 산업보건연구소의 PAT 정도관리 참여결과 (Performance of Institute of Occupational Health, Korean Industrial Health Association in Proficiency Analytical Testing Program)

  • 이준승;유호겸;오미순;박화미;윤기상;최호춘;정규철
    • 한국산업보건학회지
    • /
    • 제6권2호
    • /
    • pp.313-321
    • /
    • 1996
  • Our laboratoy has been participated in Proficiency Analytical Testing (PAT) program which is operated by the Americal Industrial Hygiene Association in cooperation with the National Institute for Occupational Safety and Health (NIOSH). The program is designed to assist a laboratory improve its analytical performance by providing samples on a quarterly basis, evaluating the results, and providing reports on how well the laboratory performed. Evaluation of the results reported here covers five rounds of the PAT program (round 121~round 125). The way a laboratory is evaluated by PAT program is as follows: 1) There is no overall proficiency rating given to a laboratory. 2) A proficiency rating is given for each type of analyze (i.e., metals, silica, asbestos, solvents) that a laboratory analyzed. 3) Proficiency is rated acceptable ("A") if Z score lies between -3 and +3, and unacceptable if Z score is either higher than +3 ("H") or lower than -3 ("Lo"). Z score = (reported data - reference value) / standard deviation 4) For a laboratory to be rated proficient it must either have had no outliers over the most recent two rounds or of the samples actually analyzed over the past year (past four rounds), 75 % or more of the analyze sample results must be acceptable. According to the above rating criteria of PAT program, performance of metals including cadmium, lead, chromium and zinc, and asbestos sample analyses were rated acceptable ("A"). For silica analyses, all samples except one out of four samples in round 122 was rated high("H") were acceptable showing 95 % of ing 95 % of acceptance rate (19/20) throughout the rounds. Analyses of organic solvents were done on 52 samples in 9 types including methanol(MOH), 1,1,1-trichloroethane(MCM), tetrachloroethylene(PCE), trichloroethylene(TCE), benzene(BNZ), o-xylene(OXY), toluene(TOL), chloroform(CFM), 1,2-dichloroethane(DCE). All samples analyzed were rated acceptable except 2 samples that were rated high; one out of each four MCM and TCE samples in round 121, and one that was low out of four o-xylene analyses in round 122 indicating 94 % of acceptance rate(49/52) throughout the rounds. According to the laboratory rating criteria, our laboratory is rated proficient so far for all types of contaminants.

  • PDF

연폭로 지표들의 정상치에 관한 연구 (A Study on the Normal Values of Lead Exposure Indices)

  • 신해림;김준연
    • Journal of Preventive Medicine and Public Health
    • /
    • 제19권2호
    • /
    • pp.167-176
    • /
    • 1986
  • For the purpose of determinating the normal values of some parameters relevant to lead exposure, a study was carried out from April 1 to June 30, 1986 on 258 healthy Korean adults who have had no apparant lead exposure. The lead indices subjected to this study were as follows; blood lead (PbB), hemoglobin (Hb), zinc protoporphyrin in blood (ZPP), delta-aminolevulinic acid dehydratase (ALAD) activity in blood, coproporphyrin in urine (CPU), delta-aminolevulinic acid in urine (ALAU). 1) The mean value of PbB was $17.17{\pm}7.87{\mu}g/100ml$, and there was no statistically significant difference by age & sex. The distribution of PbB fitted to the log-normal distribution ($x^2=7.38$, p>0.1). 2) The mean value of Hb in male ($15.17{\pm}1.56g/100ml$) was higher than in female ($13.22{\pm}1.51g/100ml$)(p<0.01). The distribution of Hb fitted to the normal distribution ($x^2=9.40$, p>0.1). 3) The mean value of ZPP was $32.61{\pm}8.78{\mu}g/100ml$, and there was no statistically significant difference by age & sex. The distribution of ZPP fitted to the normal distribution ($x^2=13.93$, p>0.05). The correlation of ZPP & ALAD (r=-0.229), CPU (r=0.183) was statistically significant respectively. 4) The mean value of ALAD was $30.20{\pm}10.96{\mu}mol$ ALA/min/L of R.B.C., and there was no statistically significant difference by age & sex. The distribution of ALAD activity did not fit to the normal distribution. The correlation between ALAD & PbB (r=-0.219) was statistically significant 5) The mean value of CPU was $36.10{\pm}24.54{\mu}g/L$, and there was no statistically significant difference by age & sex. The distribution of CPU did not fit to the normal distribution. The correlation between CPU & PbB (r=0.185), ZPP (r=0.183) was statistically signinificant respectively. 6) The mean value of ALAU was $1.94{\pm}0.96mg/L$, and there was no statistically significant difference by age & sex. The distribution of ALAU fitted to the normal distribution ($x^2=9.76$, p>0.1).

  • PDF

모 일산화 연 제조 업체 근로자들의 연 폭로에 관한 연구 (Study on the lead exposure of workers in a litharge making industry)

  • 임상복;임정규;이성수;안규동;이병국
    • Journal of Preventive Medicine and Public Health
    • /
    • 제28권4호
    • /
    • pp.875-884
    • /
    • 1995
  • In order to investigate the level of lead exposure of workers in litharge making industry and to evaluate how lead exposure, personal habit such as smoking and drinking affect the prevalence of lead related symptoms and other study variables, we investigate 114 workers(24 office workers and 90 lead exposed workers) in a litharge making industry. Study variables chosen were blood lead(PbB), zinc protoporphyrin in whole blood(ZPP), Hemoglobin(Hb), hematocrit (Hct), SGOT and SGPT symptom questionnaires which had 15 lead exposure related symptoms were provided to all workers and filled up by themselves and reconfirmed by physician. The results obtained were as follows; 1. The mean value of PbB, ZPP and SGOT in lead exposed group were higher than those of non-exposed group, and there were no differences of means in other study variables. 2. The smoking and drinking rate of study subjects were 65.8% and 71.0% as a whole. Smoking rates were lower in non-exposed group than exposed group, but drinking rate were not. 3. There were no differences of mean values of study variables between smoker and non-smoker in non-exposed and exposed group, but there was a difference of mean value of SGOT between drinker and lion-drinker in lead exposed group. 4. While the symptom prevalence of lead exposed group were higher in neuromuscular category than non-exposed group, those of non-exposed group were higher or same with exposed group in gastrointestinal and general symptom category. 5. The symptom prevalence of smoker were higher than non-smoker regardless of exposure. 6. The symptom prevalence of drinker were only higher in gastrointestinal symptom category than non-drinker. 7. In multiple stepwise regression analysis of lead related symptoms as dependent variable and blood lead, smoking habit, drinking habit and work duration as independent variables, drinking habit contributed to the gastrointestinal symptom category, whereas blood lead and smoking contributed to the neuromuscular symptom category. For the total symptoms work duration and smoking habit contributed significantly.

  • PDF

한국멧토끼 ZFX와 ZFY 유전자의 성별 이형성과 분자 성판별 (Molecular Sex Determination Using Sexual Dimorphisms between ZFX and ZFY Genes in Korean Hares(Lepus coreanus Thomas))

  • 한상현;조인철;이성수;오문유;오홍식
    • 생명과학회지
    • /
    • 제17권3호통권83호
    • /
    • pp.402-406
    • /
    • 2007
  • 우리나라에 분포하는 멧토끼 (Lepus coreanus)의 성판별을 위한 분자 표지자를 개발하기 위하여, X, Y 염색체간 상동인 ZFX와 ZFY 유전자들의 성별 이형성에 초점을 맞추어 본 연구를 수행하였다. ZFX와 ZFY 유전자의 인트론 7 영역은 멧토끼의 암수가 구분되는 증폭 양상을 나타내었다. 인트론 7의 길이는 각각 ZFX에서 538, ZFY에서 233-bp로 확인되었다. 특히, ZFX의 인트론 7에서는 RNA-매개성 전위인자 중 한 종이며 토끼의 유전체에서 빈번하게 관찰되는 CSINE2와 유사한 반복서열이 발견되었다. 반면, 반복서열은 ZFY의 인트론 7에서는 관찰되지 않았다. ZFX와 ZFY 유전자의 인트론 7에서 확인된 길이의 차이에 근거하여 중합효소연쇄반응 기법을 이용한 유전자 성판별을 수행하였다. 시험에 이용된 모든 DNA시료들은 ZFX에서 증폭된 공통의 밴드를 가지고 있었다. 이에 반해, 멧토끼 수컷 DNA들은 각각 ZFX와 ZFY에서 증폭된 두 개의 구분되는 밴드들을 나타내었다. ZFX-ZFY 유전자·성판별 결과는 표현형 성별 정보뿐만 아니라 수컷-특이적인 SRY 유전자의 증폭양상과도 일치한 결과와도 정확히 일치하였다. 이상의 결과들은 멧토끼에서 ZFX와 ZFY의 인트론 7 영역간의 성별 이형성은 유전자 성판별을 위한 유용한 유전자 표지자가 될 것으로 사료된다.