The Implementation of A Therapy Radiation Dose Measurement System Using A Microcomputer

마이크로컴퓨터를 이용한 치료방사선 선량측정 시스템의 구현

  • Lee, D.H. (Department of Electronic Engineering, Inha University) ;
  • Kwon, O.S. (Department of Electronic Engineering, Inha University) ;
  • Hong, J.P. (Department of Electronic Engineering, Inha University) ;
  • Chae, C.S. (Department of Electronic Engineering, Inha University) ;
  • Hong, S.H. (Department of Electronic Engineering, Inha University)
  • 이동훈 (인하대학교 공과대학 전자공학과) ;
  • 권오상 (인하대학교 공과대학 전자공학과) ;
  • 홍준표 (인하대학교 공과대학 전자공학과) ;
  • 최창순 (인하대학교 공과대학 전자공학과) ;
  • 홍승홍 (인하대학교 공과대학 전자공학과)
  • Published : 1996.11.15

Abstract

In this paper, the therapy radiation dose measurement system has been implemented by using a microcomputer after radiation was irradiated on diodes from the MM22 microtron accelerator. We have displayed 7-channel diode output values on the LCD after processing those in the 80196 MCU(Micro Computer Unit). Signal processing has been performed in the pulse mode because we can process the signal fast and use it to perform portal image by increasing a number of diode channels in the future. In order to verify the microcomputer based radiation measurement system of diodes, diode output values were compared with that of semiconductor.

Keywords