The Study of Dark Current of Amorphous Selenium Plate for Digital Radiography Applications

Digital Radiography용 amorphous selenium 시편의 누설전류에 관한 연구

  • Kang, Y.S. (Dept. of Biomedical Engineering, College of Health Science, Inje University) ;
  • Kang, W.S. (Dept. of Biomedical Engineering, College of Health Science, Inje University) ;
  • Jung, S.H. (Dept. of Biomedical Engineering, College of Health Science, Inje University) ;
  • Park, S.K. (Dept. of Biomedical Engineering, College of Health Science, Inje University) ;
  • Nam, S.H. (Dept. of Biomedical Engineering, College of Health Science, Inje University)
  • 강영수 (인제대학교 보건대학 의용공학과) ;
  • 강원석 (인제대학교 보건대학 의용공학과) ;
  • 정성훈 (인제대학교 보건대학 의용공학과) ;
  • 박성광 (인제대학교 보건대학 의용공학과) ;
  • 남상희 (인제대학교 보건대학 의용공학과)
  • Published : 1998.11.20

Abstract

In this paper, the electric properties of amorphous selenium specimen has been investigated. Amorphous selenium was thermally evaporated on the glass plate which had been deposited onto the interface by aluminium as an electrode. On the surface of the amorphous selenium, the aluminium electrode was deposited again in order to make an unit cell for dark current measurement. The dark current was measured while applying the bias voltage across the selenium layer in the range of 0V-2500 Volts. The leakage property of the amorphous selenium was significantly low at even high voltage range so it has good advantage as a X-ray receptor for digital radiography. For further study, the C-V curves measurement according to thicker amorphous selenium layer.

Keywords