음향 방출 측정법을 이용한 몰드변압기 열화진단

Diagnosis of Insulation Deterioration in Cast Resin Transformer Using Method of AE Measurement

  • 이상우 (영남대학교 전기전자공학부) ;
  • 구경철 (영남대학교 전기전자공학부) ;
  • 김성규 (영남대학교 전기전자공학부) ;
  • 김인식 (경일대학교 전기전자공학부) ;
  • 이동인 (영남대학교 전기전자공학부) ;
  • 김기채 (영남대학교 전기전자공학부) ;
  • 박원주 (영남대학교 전기전자공학부) ;
  • 이광식 (영남대학교 전기전자공학부)
  • Lee, Sang-Woo (School of Electrical and Electronic Engineering, Yeungnam University) ;
  • Gu, Kyung-Chul (School of Electrical and Electronic Engineering, Yeungnam University) ;
  • Kim, Seung-Gyu (School of Electrical and Electronic Engineering, Yeungnam University) ;
  • Kim, In-Sik (School of Electrical and Electronic Engineering, Kyungil University) ;
  • Lee, Dong-In (School of Electrical and Electronic Engineering, Yeungnam University) ;
  • Kim, Ki-Chai (School of Electrical and Electronic Engineering, Yeungnam University) ;
  • Park, Won-Zoo (School of Electrical and Electronic Engineering, Yeungnam University) ;
  • Lee, Kwang-Sik (School of Electrical and Electronic Engineering, Yeungnam University)
  • 발행 : 2000.07.17

초록

In this paper, a frequency spectra of AE (acoustic emission) signals detected from the partial discharges of an epoxy resin void and a cast resin transformer in operating were analyzed to offer the proper frequency range of AE signals from the corona discharge for the purpose of AE sensor selection, From these results, a frequency spectra of AE signals emitted from the corona discharges in the void of an epoxy resin sample were about 190[kHz] to 220[kHz] by the FFT(fast fourier transform), A frequency spectra of AE signals emitted from a cast. resin transformer with non-load were appeared to be downward of about 140[kHz] by the FFT, and then a frequency spectra of AE signals emitted from the above of cast resin transformer with load were appeared to increase from about 190[kHz] to 220[kHz] by the FFT.

키워드