Dielectric Characteristics of Turn-ro-Turn Insulation for SFCL

초전도 한류기의 턴간 절연특성

  • Baek, Seung-Myeong (Department of Electrical Engineering, Gyeongsang National University and Engineering Research Institute) ;
  • Joung, Jong-Man (Department of Electrical Engineering, Gyeongsang National University and Engineering Research Institute) ;
  • Lee, Chang-Hwa (Department of Electrical Engineering, Gyeongsang National University and Engineering Research Institute) ;
  • Kim, Sang-Hyun (Department of Electrical Engineering, Gyeongsang National University and Engineering Research Institute)
  • 백승명 (경상대학교 전기공학과 및 공학원) ;
  • 정종만 (경상대학교 전기공학과 및 공학원) ;
  • 이창화 (경상대학교 전기공학과 및 공학원) ;
  • 김상현 (경상대학교 전기공학과 및 공학원)
  • Published : 2003.05.23

Abstract

Interconnected power system operation has given rise to the problem of increased fault levels and leads to over stressing of all the components. Use have been made of recently developed high Tc superconductor in devising a superconducting fault current limiter (SFCL) that promises optimum performance in terms of capital cost, size, auto sensing, operational losses, response time and reliability. Recently, research about the application of the SFCL is actively progressing in Korea. To be applied for SFCL practically, the electrical insulation design of SFCL must be developed. Therefore, this paper presents the result of an investigation of the dielectric characteristics of turn-to-turn insulation for SFCL in liquid nitrogen. The dielectric characteristics of turn-to-turn insulation models of SFCL were investigated. We obtained following results. The breakdown voltages increased as the spacer thickness and length increased. And the breakdown voltages of turn-to-turn model without spacer were higher than the breakdown voltages of turn-to-turn model with spacer under impulse as well as AC voltages. The information gathered in this test series should be helpful in the design of liquid nitrogen filled SFCL.

Keywords