The effects of the grinding depth of the inner bead on the steel tube hydroformability

강관의 내면비드 제거 깊이가 하이드로포밍 성형성에 미치는 영향도 분석

  • 김봉준 (부산대학교 정밀기계공학과) ;
  • 박광수 (부산대학교 정밀기계공학과) ;
  • 김대현 (부산대학교 정밀기계공학과) ;
  • 문영훈 (부산대학교 정밀기계공학과)
  • Published : 2005.10.01

Abstract

In the roll forming, a flat strip is progressively deformed by feeding it through a series of rotating rolls. There are various layouts for the tube toll-forming stages. The process sequences are as follows: leveling, roll-forming, welding, bead removing, seam annealing, cooling, sizing and cutting. Electric resistance welded(ERW) tubes have been widely used for the machinery parts, especially for hydroformed automotive parts. However conventional ERW tubes do not have a high formability because of hardening of welded portion by rapid cooling. Moreover the decrease in thickness of the welded portion during the grinding of the inner and outer bead may reduce the formability of the tube. In case of applying the tubular parts without grinding the bead, the flow of the fluid can be prevented due to the turbulent flow induced by the inner bead. In attempt to determine the optimal bead grinding amount in the roll forming process, in the present paper, the effects of the removal depth and width of the inner beads on the hydroformability are analyzed by the finite element simulation.

Keywords