The Effect of pulse power in the non-thermal plasma reactor for Hydrogen generation

수소발생용 비열플라즈마 반응기에서의 펄스파워 영향

  • Kim, Jong-Seok (The Department of Electrical Engineering, The University of Kyungnam) ;
  • Park, Jae-Youn (The Department of Electrical Engineering, The University of Kyungnam) ;
  • Han, Sang-Bo (The Department of Electrical Engineering, The University of Kyungnam) ;
  • Jung, Jang-Gun (The Department of Electrical Engineering, The University of Kyungnam) ;
  • Koh, Hee-Seok (The Department of Electrical Engineering, The University of Kyungnam) ;
  • Park, Sang-Hyun (The Department of Electrical Engineering, The University of Kyungnam)
  • 김종석 (경남대학교 전기공학과) ;
  • 박재윤 (경남대학교 전기공학과) ;
  • 한상보 (경남대학교 전기공학과) ;
  • 정장근 (경남대학교 전기공학과) ;
  • 고희석 (경남대학교 전기공학과) ;
  • 박상현 (경남대학교 전기공학과)
  • Published : 2005.07.07

Abstract

본 논문에서는 인가 전극구조가 다른 두가지 형태의 아크성 스트리머 방전용 플라즈마 반응기를 설계 제작하였다. 제작된 반응기에 60 Hz상용전원과 펄스파워를 인가전원으로 사용하여 반응기 형태와 인가전원에 따른 수소발생 특성에 대하여 조사하였다. 또한 방전 전력에 따른 수소발생량을 비교 분석하였다. 수소 발생을 위한 효과적인 수표면 방전은 강한 전계 집중과 높은 에너지 밀도를 동반한 아크성 스트리머 방전 분위기 형성이 필요하다. 인가전원으로 상용전원을 이용한 경우보다 펄스파워를 사용한 경우와 강한 전계집중 증대를 위해 인가 전극이 석영관 내에 배치된 전극 구조에서 수소발생에 효과적이였다.

Keywords