A Study on Technique of Navigation with Power-Reflected of the Walker in the Indoor Environment

  • Kim, Min-Sik (Department of Electronics Engineering, Korea Polytechnic University) ;
  • Kwon, Hyouk-Gil (Department of Electronics Engineering, Korea Polytechnic University) ;
  • Ryu, Je-Goon (Intelligent Healthcare System Research Center, Korea Polytechnic University) ;
  • Shim, Hyeon-Min (Department of Electronics Engineering, Inha University) ;
  • Lee, Eung-Hyuk (Department of Electronics Engineering, Korea Polytechnic University) ;
  • Shim, Jea-Hong (Department of Electronics Engineering, Korea Polytechnic University) ;
  • Lee, Sang-Moo (Research Engineer Center for Robot Technology & Manufacturing, Institute for Advanced Engineering)
  • Published : 2005.06.02

Abstract

Today, the elderly is increasing gradually in the Republic of Korea society and this problem will be more serious in the near future. Therefore, engineering support for aged people is required. We are establishing a new field of healthcare engineering for elderly people and aiming to support for aged people and disabled people using adaptive control and instrument technology. In this paper, the goal is to implement the shared control of a robot mobility aid for the elderly. As using this type of assistive technology to be useful by its intended user community, it supports elderly people and handicapped people to live independently in their private homes. The interface transforms the force applied by the user into the robot's motion. Devices like buttons, joysticks, and levers already exist for relaying user input; however, they require hand displacement that would loosen or otherwise release the user's hold. Such interfaces make operation very difficult and potentially unsafe. Therefore, we propose a shared control system. It's safe more than joysticks and buttons. The shared control is a means of registering the user's intention through physical interaction. It's an important component in the development of robotic elderly assistant. The concept of shared control describes a system which is two or more independent control systems. We are using that the three component blocks consist of pressure sensor (flexible force sensor), circuit of measurement and transfer function. Experimental trials of this paper have been tested at the indoor environment. The robot is able to know the user intended direction through haptic device were logged along with the robot's force sensor.

Keywords