Proceedings of the Korean Society for Technology of Plasticity Conference (한국소성가공학회:학술대회논문집)
- 2009.10a
- /
- Pages.399-402
- /
- 2009
A Study of the FEM Method on the Clad Sheet Metal Formability
Clad Sheet(Mg-Al-SUS) 성형성에 관한 해석 기법의 연구
- Jung, T.W. (KIMS) ;
- Lee, Y.S. (KIMS) ;
- Kim, D. (KIMS) ;
- Hoon, M.Y.
- 정택우 (한국기계연구원 부설 재료연구소 소성응용그룹) ;
- 이영선 (한국기계연구원 부설 재료연구소 소성응용그룹) ;
- 김대용 (한국기계연구원 부설 재료연구소 소성응용그룹) ;
- 문영훈 (부산대학교)
- Published : 2009.10.08
Abstract
The Clad sheet is made roll-bonding process of the one or more material with the different property. Good formability is an essential property in order to deform a clad metal sheet to a part or component. In this study, the mechanical properties and formability of a Mg-Al-SUS clad sheet are investigated. The clad sheet was deformed at elevated temperatures because of its poor formability at room temperature. Tensile tests of the each material and clad sheet were performed at various temperatures and at various strain rates. The limited draw ration (LDR) was obtained using a deep drawing test to measure the formability of the clad sheet. A finite element (FE) analysis was performed to predict formability of the cup drawing product, one_layer model and three_layer model.