한국태양에너지학회:학술대회논문집

The Korean Solar Energy Society (한국태양에너지학회)
권호 표지

Design of Blade system for west-south area in Korea

서남지역 풍황자원에 적합한 블레이드 설계

  • Cheang, Eui-Heang (Dept. of Electrical Engineering, Mokpo National University) ;
  • Moon, Chae-Joo (Dept. of Electrical Engineering, Mokpo National University) ;
  • Kwak, Seung-Hun (Dept. of Electrical Engineering, Mokpo National University) ;
  • Jung, Moon-Sun (Dept. of Electrical Engineering, Mokpo National University)
  • 정의헌 (목포대학교 대학원 전기공학과) ;
  • 문채주 (목포대학교 전기공학과) ;
  • 곽승훈 (목포대학교 대학원 전기공학과) ;
  • 정문선 (목포대학교 대학원 전기공학과)
  • Published : 2009.11.19
Download PDF
⟨ Previous Next ⟩

Abstract

Current wind turbine units that are used primarily 3Blade type devices or large-scale wind-term capacity of 2MW of 60m~90m Blade diameter is applied. This is not the best suitable design with the designing condition for the special quality of wind condition in the South-West Coastal Areas of Korea where the wind speed frequency of average wind speed and over 10m/s high wind velocity is fairly low. For this matter, in this dissertation, the expecting generation amount of electric power is measured excluding a mechanical moment, considering wind power energy traveling to the Blade when 60m~120m blade is applied, based on 2MW wind generator. Also, we would like to propose the Blade diameter which is fitted by wind condition of South-West Coastal Areas of Korea.

Keywords