Studies on the Quality of Domestic Industrial Products(I) (Jogger and Tennis shoes)

국내유통공산품(國內流通工産品)의 품질조사연구(品質調査硏究)(I) (조깅화와 테니스화)

  • Huh, D.S. (Polymer Chem. Div., National Industrial Research Institute) ;
  • Kim, J.S. (Polymer Chem. Div., National Industrial Research Institute) ;
  • An, B.K. (Polymer Chem. Div., National Industrial Research Institute) ;
  • Seo, S.K. (Polymer Chem. Div., National Industrial Research Institute) ;
  • Kim, K.J. (Polymer Chem. Div., National Industrial Research Institute)
  • 허동섭 (국립공업시험원 고분자화학과) ;
  • 김종석 (국립공업시험원 고분자화학과) ;
  • 안병국 (국립공업시험원 고분자화학과) ;
  • 서수교 (국립공업시험원 고분자화학과) ;
  • 김경자 (국립공업시험원 고분자화학과)
  • Published : 1986.12.31

Abstract

This survey reports on the extensive examination of the qualify of 14 jogging and tennis shoes separately, availavable in the domestic market, Both jogging and tennis shoes were catagorised in two groups, namely the general goods(less expensive ones) and the exclusive goods(expensive models). The detailed classification are shown below; The domestic products meet the general purpose just as that of the foreign products. Due to the adhesion technology, the domestic tennis shoes consist of rubber sole with natural leather upper;In fact, the desirable combination, as foreign products, must be polyurethane/natural leather. The expensive models were heavier than the less expensive ones. The greater weight difference of right and left shoes are shown in the expensive models than that of the less expensive ones. The moisture absorption ratio of the expensive model is far superior in comparison with the less expensive model. The reason is identified by the material supplyed to produce the expensive model consisted of the natural leather and proper parts. The abrasion resistance of the expensive models were excellent that of the less expensive ones, because the rubber soles were showed the properties better than polyurethane sole which was used in the less expensive model.

Keywords