Synthetic Sea Water and Strain Hate Effects on Tensile Properties of E-Glass/Polyester Composites

E-Glass/Polyester 적층복합재료의 인장특성에 미치는 인공해수 및 변형율속도의 영향

  • Kim, Yeon-Jik (Dept. of Mech. Eng., Groduate School of Chonbuk National Univ.) ;
  • Im, Jae-Gyu (Dept. of Mech. Design, Chonbuk National Univ.)
  • Published : 1992.04.01

Abstract

The slow strain-rate test($1{\times}10^{-4}~1{\times}10^{-7}sec^{-1}$) was performed to understand the tensile properties of chopped strand glass mat/polyester composite in air and synthetic sea water. (pH 6.0, 8.2, 10.0) For the tested composite subjected to tensile loading in air and synthetic sea water (ph 6.0, 8.2, 10.0), the tensile properties are a little decreased as strain rate decrease and a little decrease in stiffness is observed in $1{\times}10^{-7}sec^{-1}$. The tensile properties were some changed in case the pH value in synthetic sea water is varied.

E-glass/Polyester 적층복합재료의 인공해수중에서의 인장특성을 알아보기 위해 PH를 각각 6.0, 8.2, 10.0으로 조절한 가운데 저 변형율 인장시험($1{\times}10^{-4}~1{\times}10^{-7}sec^{-1}$)을 행하였다. 대기와 인공해수중에서 인장하중을 받은 시험된 복합재료는 strain rate가 감소할수록 인장특성이 저하되며 $1{\times}10^{-7}sec^{-1}$의 strain rate에서 약간의 강성저하가 관찰되었다. 한편 인공해수중의 인장특성은 PH값에 따라 약간의 변화를 보였다.

Keywords