한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제8권5호
  • /
  • Pages.96-101
  • /
  • 1999
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

자유곡선 기어의 창성 알고리즘에 관한 연구

A Study of Algorithm on the Freefrom Curve Gear

  • 최종근 (순천대학교 자동차공학과)
  • 발행 : 1999.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study suggests an algorithm for tooth profile generation of free from curve involute gear, a special gear of which the pitch line is a free curve instead of a circular one. For the first, a methodology for calculation of the tooth curve is developed and formulated Then the formulated algorithm, is programmed for manufacturing and verified by computer graphics. Next the calculated results as changed in to NC codes to apply to wire electric discharge machine(WEDM). Finally, the machined gear is examined in engagement with a standard involute gear.

키워드

참고문헌

  1. Jounal of Mechanisms, Transmission and Automation in Design.ASME. v.111 no.433 A Study of super Gear Geometry Factor Through Complex Potential Arcas A. Cardou;G.V.Tordion
  2. ASME 6 v.116 The Linear Approximated Equation of Vibration of a pair of Spur Gears Theory and Experiment Y. Cai;T. Hayashi
  3. Amer. Machinist Grant
  4. Amer. Machinist Richard
  5. 日本機械試驗所報告 no.30 非圓形齒車に 關 する硏究 窪田雅男
  6. Gear Geometry and Applied Theory Faydor L. Litvin
  7. 日本設計製圖學會論文集 v.22 no.5 非圓形齒車 機構の設計 製作 漢山良明
  8. 日本機械學會論文集 v.34 no.6 楕圓形齒形車の設計 新井哲夫
  9. 日本機械學會論文集 v.29 no.11 非圓形齒車の設計, 製作およぴ應用 山琦降
  10. Journal of Mechanisms Transmission, and Automation in Design 2. ASME v.111 no.611 Optional Tooth Modifications for Spur and Helical Gears V.Sinon
  11. 한국 정밀공학회지 v.15 no.5 인볼류우트-트로코이드 치형을 갖는 타원계 엽형기어의 최소잇수에 관한연구 최상훈
  12. 한국 정밀공학회지 v.15 no.4 타원계 엽형기어의 설계 및 동특성 관한 연구 유명섭