Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

Effect of Catalysts on Preparation of Mullite Precursor Using Silicic Acid Extracted by THF from Sodium Silicate

규산 나트륨으로부터 THF에 의해 추출된 규산을 이용한 Mullite 전구체 제조시 촉매에 대한 영향

  • Published : 2000.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Effect of catalysts, which was catalyzed by acid(HCl and HNO3) and base(NH4OH), on characteristics of the mullite powders prepared by sol-gel methdo wa sinvestigated by XRD, TGA, SEm AND BET. As a result, weight loss as a function of catalysts was in order of HCl=32.6%>HNO3=25.44%>Non=24.0%>NH4OH=22.5%. The mullite powder dried at 100$^{\circ}C$ appeared spherical shape in acid catalyst and different shape in base catalyst, but sintering powder at 1400$^{\circ}C$ appeared very fine particle of 0.05∼0.1$\mu\textrm{m}$ regardless of catalysts. In all cae, the pore quantity, which was capable to adsoprtion, was decreased with increasing temperature. In base catalyst, no change of special surface area in mullite appeared.

Keywords

References

  1. High Temperature Oxides Mullite R. F. Davis;J. A. Pask
  2. Trans. J. Brit. Cer. Soc. v.72 Microwave Dielectric Properties of Mullite G. S. Perry
  3. J. Am. Ceram. Soc. v.60 no.3-4 High-Temperature Mechanical Properties of Mullite under Compression P. C. Dokoko;J. A. Pask
  4. v.98 no.10 H. Katsuki;Y. Hirata;Y. Kyokaishi
  5. 월간 세라믹스 v.1 전자 부품산업 소재로서의 파인세라믹스 김현재
  6. J. Am. Ceram. Soc. v.74 no.10 Mullite for Structural, Electronic and Optical Application I. A. Asay;D. M. Daggs;M. Sarikaya
  7. Ceram. Bull. v.70 no.7 L. M. Sheppard
  8. J. Polym. Sci. Polym. Chem. Ed. v.18 Silylation of Water Glass. Ⅰ S. Kohama;H. Inoue;T. Yasuda
  9. Nippon Kagaku Kaishi v.7 Preparation of Polysiloxanes by the Silylation of Silicic Acid Extracted with Tetrahydrofuran Y. Abe;T. Misono
  10. J. Polym. Sci. Polym. Chem. Ed. v.21 Preparation of Ploysiloxanes from Silicic Acid, Ⅲ Y. Abe;T. Misono
  11. J. Polym. Sci. Polym. Lett. Ed. v.22 Preparation of Ploysiloxanes from Silicic Acid. Ⅵ Y. Abe;T. Misono
  12. J. Polym. Sci. Polym. Chem. Ed. v.22 Preparation of Ploysiloxanes from Silicic Acid. Ⅶ Y. Abe;N. Shintani;T. Misono
  13. J. Polym. Sci. Polym. Chem. Ed. v.25 Preparation of Ploysiloxanes from Silicic Acid. Ⅸ Y. Abe;A. Kaijou;N. Shintani;Y. Nagao;T. Misono
  14. 한국공업학회지 v.7 no.4 규산나트륨으로부터 유기용매 추출에의한 고순도 규산 제조에 관한 연구 노재성;홍성수;정흥호
  15. 한국요업학회지 v.33 no.8 규산나트륨으로부터 유기용매로 추출된 규산을 이용한 Mullite 전구체 분말제조 노재성;홍성수;이법재;이병기;박은희;정흥호
  16. Heterogeneous Catalysis in Practice C. N. Satterfield
  17. J. Am. Chem. Soc. Ed. v.73 The Determination of Pore Volume and Area Distributions in Porous Substances.Ⅰ. Computations from Nitrogen Isotherms E. P. Barrett;L. G. Joyner;P. P. Halenda
  18. Yogyo-Kyokai-shi. v.93 no.1 Property of SiO₂-Al₂O₃ Powders Prepard from Matal Alkoxide Y. Hirata;H. Minamizono;K. Shimada