한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제9권6호
  • /
  • Pages.111-117
  • /
  • 2000
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

기계가공면의 소성스트레인 분포에 관한 연구

A Study on Plastic Strain Distribution of Machined Surface

  • ;
  • 飯野 豊 ;
  • 발행 : 2000.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The plastically deformed layer in a machined surface must be considered in precision machining process. Therefore the analysis of the machined surface, including the plastic deformation and strain distribution should be carried out quantitatively. The subsequent recrystallization technique was presented for analysis of the plastically deformed layer in the machined surface, and the technique was successfully applied to determine the plastic strain in the machined surface. This investigation is to evaluate the plastic strain in the distance 0.1mm from the machined surface, and in particular, to find the effect of shear angle, shear strain, cutting energy etc. on the plastic strain.

키워드

참고문헌

  1. ASME J. of Engng for Industry v.98 Surface Integrity in Machining AISI 4340 Steel J. Bailey(et. al.)
  2. ASME J. of Engng for Industry v.104 Bariables Governing Patterns of Mechanical Residual Stress in a Machined Surface C.R. Liu(et. al.)
  3. 한국공작기계기술학회지 v.6 no.3 절삭가공시 잔류응력에 관한 연구 주호윤;이용성
  4. Annals of thr CIRP v.20 no.2 Review of Surface Integrity of Machined Components M. Field(et. al.)
  5. ASME PED v.38 Effect of Machining Process on the Fatigue Strength of Hardened AISI Steel T.Y. Kim(et. al.)
  6. Wear v.147 A New Technique to Measure Plastic Strain in the Machined Surface T.Y. Kim(et. al.)
  7. Paper no.MS509 Accumulated Plastic Zone around Fatigue Crack in Type 304 Stainless Steel Y. Iino
  8. Trans. Japan Welding Society v.13 no.2 Recrystallization Technique of Plastic Deformation in Weld of Mild Steel T.Y. Kim(et. al.)
  9. J. of Material Science Letters Subsequent Recrystallization Technique of Local Plastic Strain in 304 Stainless Steel Y. Iino
  10. J. of Material Science Letters v.12 Machined Surface Plastic Zone and Strain by Subsequent Recrystallization Technique Y. Iino;T.K. Kim(et. al.)
  11. Wear v.199 Machined surface plastic strain in orthogonal cutting by subsequent recrystallizations technique Y. Iino;T.Y. Kim;S.D. Mun
  12. 한국정밀공학회지 v.15 no.4 정밀가공면의 소성스트레인 측정을 위한 새로운 기법의 개발 김태영;飯野豊;문상돈
  13. Engng Fracture Mechanics v.12 Fatigue Crack Propagation Work Coefficient ;A Material Constant Giving Degree of Resistance to Fatigue Crack Growth Y. Iino
  14. ASME J. of Engng for Industry v.104 Predicting the Shear Angle in Machining From Workmaterial Strain-Hardening Characteristics P.K. Wright
  15. 절삭가공학 서남섭
  16. 한국공작기계학회지 v.7 no.3 이종금속의 선삭가공 특성에 관한 연구 김동현