Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

Behavior of Reciprocating Dry Sliding Wear of Plastics Against Steel

플라스틱재료의 왕복동 마찰마멸거동

  • 김충현 (한국과학기술연구원 트라이볼로지 연구센터, 한양대학교 대학원 기계설계학과) ;
  • 안효석 (한국과학기술연구원 트라이볼로지 연구센터) ;
  • 정태형 (한양대학교 기계공학부)
  • Published : 2000.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Friction and wear tests have been performed on nylon, acetal resin, and PTFE (polytetrafluoroethylene), in reciprocating dry sliding conditions against steel discs. According to the results, acetal resin showed the lowest wear rates and PTFE exhibited the lowest friction coefficient. The prominent wear mechanisms found were adhesion and abrasion.

Keywords

References

  1. 한국플라스틱기술정보 플라스틱 해설과 물성집 이기만;정동천
  2. Polymer v.39 no.23 The mechanism of PTFE and PE friction deposition Sch nherr, H.;Vancso, G. J.
  3. Wear v.23 The mechanism of wear of polytetrafluoroethylene Tanaka K.;Uchiyama, Y.;Toyooka, S.
  4. Wear v.64 Tribological behaviour of polyacetals Clerico, M.
  5. Polymer testing v.16 Effects of amorphous nylon on the properties of nylon Kang, T. (et al)
  6. Wear v.194 Reciprocal sliding wear of SiC particle-reinforced Al-Cu aluminium matrix composites against stainless steel, high speed tool steel and ceramics II. Wear mechanisms Bai, M. (et al)
  7. 기계설계도표편람 小栗達男

Cited by

  1. 유한요소해석에 의한 플라스틱 스퍼기어의 내구성 향상방안 연구 vol.27, pp.2, 2000, https://doi.org/10.3795/ksme-a.2003.27.2.223