Journal of the Korean Wood Science and Technology
- 제29권1호
- /
- Pages.22-30
- /
- 2001
- /
- 1017-0715(pISSN)
- /
- 2233-7180(eISSN)
스트랜드/파티클 복합체의 기계적 성질에 관한 연구(II) - 탄성률 측정 및 초음파법에 의한 이방성의 예측 -
A Study on Mechanical Properties of Strand/Particle Composites (II) - Measuring of Young's Moduli and Estimating of Anisotropy Using an Ultrasonic Method -
- 김유정 (경북대학교 농업과학기술연구소)
- Kim, Yu-Jung (Institute of Agriculture Science and Technology, Kyungpook National University)
- 투고 : 2000.03.02
- 심사 : 2000.12.06
- 발행 : 2001.03.30
초록
본 연구에서는 배향도가 높은 스트랜드와 무배향성의 파티클을 혼합해서 다양한 층구조의 복합체를 제조하여 각종 탄성률을 측정하여 비교하였으며, 초음파법을 적용하여 이방성 적층재료의 층구조에 기인하는 이방성의 정도를 예측하기 위하여 초음파 전파속도와 복합체 면내의 이방성의 관계에 대하여 검토했다. 그 결과 각층구조 복합체의 정적 휨 탄생률
Composites with various layer constructions involving the ratio of S/P were produced from wood strands(S) and particles(P) (Cryptomeria japonica D.Don) to measure various Young's moduli and anisotropy by ultrasonics. As a result, static Young's moduli of composites were almost same as dynamic Young's moduli obtained from natural frequency. However, these were smaller than those evaluated from ultrasonic wave propagation velocity. The differences between propagation velocity of the parallel(